英国 · 品目· 5 个子目· 31 个税号
3901初级形状的乙烯聚合物
Primary forms polymers of ethylene, in primary forms
子目（6 位 WCO 统一）
英国税号（10 位）
本品目下 英国海关的全部细分税号与首要税率
| HS 编码 | 商品描述 | 首要税率 |
|---|---|---|
| 3901101020 | High flow linear low density polyethylene-1-butene / lldpe (cas rn 25087-34-7) in form of powder, with -a melt flow rate (mfr 190 °c/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and -a density (astm d 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °c | 6.00 % |
| 3901101050 | Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with: <br>-a density (astm d 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³,<br>-a melt flow rate (190 °c/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and<br>-a peak melting temperature of 120 °c or more but not more than 124 °c | 6.00 % |
| 3901101060 | Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with: <br>-a density (astm d 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and<br>-a melt flow rate (190 °c/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min | 6.00 % |
| 3901101090 | Other | 6.00 % |
| 3901109030 | Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper | 6.00 % |
| 3901109090 | Other | 6.00 % |
| 3901201000 | Polyethylene in one of the forms mentioned in note 6(b) to this chapter, of a specific gravity of 0,958 or more at 23 °c, containing:<br>- 50 mg/kg or less of aluminium,<br>- 2 mg/kg or less of calcium,<br>- 2 mg/kg or less of chromium,<br>- 2 mg/kg or less of iron,<br>- 2 mg/kg or less of nickel,<br>- 2 mg/kg or less of titanium and<br>- 8 mg/kg or less of vanadium,<br>for the manufacture of chlorosulphonated polyethylene | — |
| 3901209000 | Other | 6.00 % |
| 3901300010 | For cavity filling, for use in certain types of aircraft | 6.00 % |
| 3901300020 | Copolymer of ethylene and vinyl acetate (cas rn 24937-78-8) <br>-containing by weight 28 % or more but not more than 49 % of vinyl acetate, <br>-with a melt flow rate of less than 5g/10 min (190 °c/2.16 kg, astm d1238),<br>-in the form of pellets<br> | 6.00 % |
| 3901300030 | Terpolymer of ethylene, vinyl acetate and methacrylic acid (cas rn 26375-31-5) | 6.00 % |
| 3901300099 | Other | 6.00 % |
| 3901400010 | High flow linear low density polyethylene-1-butene / lldpe (cas rn 25087-34-7) in form of powder, with -a melt flow rate (mfr 190 °c/2,16 kg) of 16g/10 min or more, but not more than 24 g/10 min and -a density (astm d 1505) of 0,922 g/cm³ or more, but not more than 0,926 g/cm³ and -a vicat softening temperature of min. 94 °c | 0.00 % |
| 3901400030 | Octene linear low-density polyethylene (lldpe) produced by a ziegler-natta catalyst method in the form of pellets with:<br>- more than 10 % but not more than 20 % by weight of copolymer,<br>- a melt flow rate (mfr 190°c/2,16 kg) of 0,7 g / 10 min or more but not more than 0,9 g / 10 min, and<br>- a density (astm d4703) of 0,911 g/cm³ or more, but not more than 0,913 g/cm³<br>for use in the co-extrusion processing of films for flexible food packaging | 0.00 % |
| 3901400050 | Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with: <br>-a density (astm d 1505) of 0,924 g/cm³ or more but not more than 0,928 g/cm³,<br>-a melt flow rate (190 °c/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and<br>-a peak melting temperature of 120 °c or more but not more than 124 °c | 0.00 % |
| 3901400060 | Copolymer of ethylene and 1-butene (cas rn 25087-34-7) with: <br>-a density (astm d 1505) of 0,922 g/cm³ or more but not more than 0,926 g/cm³ and<br>-a melt flow rate (190 °c/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min | 0.00 % |
| 3901400090 | Other | 0.00 % |
| 3901903000 | Ionomer resin consisting of a salt of a terpolymer of ethylene with isobutyl acrylate and methacrylic acid; a-b-a block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight 35 % or less of styrene, in one of the forms mentioned in note 6(b) to this chapter | 0.00 % |
| 3901908010 | For cavity filling, for use in certain types of aircraft | 6.00 % |
| 3901908053 | Copolymer of ethylene and acrylic acid (cas rn 9010-77-9) with<br>- an acrylic acid content of 18,5 % or more but not more than 49,5 % by weight (astm d4094), and<br>- a melt flow rate of 10g/10 min (mfr 125 °c/2.16 kg, astm d1238) or more<br> | 6.00 % |
| 3901908055 | Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:<br>- an acrylic acid content of 6 % or more but not more than 50 % by weight, and<br>- a melt flow rate of 1g/10 min or more at 190 °c/2.16 kg (measured using astm d1238)<br> | 6.00 % |
| 3901908067 | Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more | 6.00 % |
| 3901908073 | Mixture containing by weight<br>- 80 % or more, but not more than 94 % of chlorinated polyethylene (cas rn 64754-90-1) and<br>- 6 % or more, but not more than 20 % of styrene-acrylic copolymer (cas rn 27136-15-8)<br> | 6.00 % |
| 3901908075 | Terpolymer of ethylene, isobutyl acrylate and methacrylic acid (cas rn 37433-35-5), in the form of pellets | 6.00 % |
| 3901908085 | Terpolymer of ethylene, n-butyl acrylate and carbon monoxide (cas rn 61843-70-7) in the form of pellets | 6.00 % |
| 3901908091 | Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid | 6.00 % |
| 3901908092 | Chlorosulphonated polyethylene | 6.00 % |
| 3901908093 | Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticizer in the manufacture of roof sheets | 6.00 % |
| 3901908094 | Mixtures of a-b block copolymer of polystyrene and ethylene-butylene copolymer and a-b-a block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene | 6.00 % |
| 3901908097 | Chlorinated polyethylene, in the form of powder | 6.00 % |
| 3901908099 | Other | 6.00 % |