英国 · 品目· 10 个子目· 71 个税号
8414空气泵、真空泵、气体压缩机、风扇、通风罩及生物安全柜
Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters
子目（6 位 WCO 统一）
英国税号（10 位）
本品目下 英国海关的全部细分税号与首要税率
| HS 编码 | 商品描述 | 首要税率 |
|---|---|---|
| 8414101500 | Of a kind used for the manufacture of semiconductors or solely or principally used for the manufacture of flat panel displays | 0.00 % |
| 8414102510 | For use in civil aircraft | 0.00 % |
| 8414102530 | Tandem pump consisting of:<br>-an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1 000 revolutions per minute,<br>-vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute<br>for use in the manufacture of engines of motor vehicles | 0.00 % |
| 8414102590 | Other | 0.00 % |
| 8414108110 | For use in civil aircraft | 0.00 % |
| 8414108190 | Other | 0.00 % |
| 8414108910 | For use in civil aircraft | 0.00 % |
| 8414108990 | Other | 0.00 % |
| 8414202000 | Handpumps for cycles | 0.00 % |
| 8414208010 | For use in civil aircraft | — |
| 8414208090 | Other | 2.00 % |
| 8414302010 | For use in civil aircraft | — |
| 8414302090 | Other | 2.00 % |
| 8414308110 | For use in civil aircraft | — |
| 8414308150 | Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kw or more but not more than 10 kw, with a displacement volume of not more than 35 cm³, of the type used in refrigeration equipment | 2.00 % |
| 8414308160 | Hermetic rotary compressors for either hydrofluorocarbon (hfc) or hydrocarbon refrigerants:<br>- driven by ‘on-off’ single phase alternate current (ac) or ‘brushless direct current’ (bldc) variable speed motors,<br>- with a nominal power rating of not more than 1,5kw,<br>- a rated voltage of 100v or more but not more than 240v,<br>- with a height of not more than 300mm,<br>- an external diameter of not more than 150mm,<br>- with a unit weight of not more than 15kg,<br>for use in the manufacture of heat pumps for household appliances, including clothes dryers<br> | 2.00 % |
| 8414308189 | Other | 2.00 % |
| 8414308910 | For use in civil aircraft | — |
| 8414308920 | Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kw but not more than 10 kw | 2.00 % |
| 8414308940 | Electrical compressor for motor vehicle air conditioning system:<br>-with a power output of more than 0,4 kw but not exceeding 10 kw,<br>for use in the manufacture of motor vehicles of subheading 8703 40 | 2.00 % |
| 8414308990 | Other | 2.00 % |
| 8414401000 | Giving a flow per minute not exceeding 2 m<sup>3</sup> | 2.00 % |
| 8414409000 | Giving a flow per minute exceeding 2 m<sup>3</sup> | 2.00 % |
| 8414510010 | For use in civil aircraft | — |
| 8414510090 | Other | 2.00 % |
| 8414591500 | Fans of a kind used solely or principally for cooling microprocessors, telecommunication apparatus, automatic data processing machines or units of automatic data processing machines | 0.00 % |
| 8414592510 | For use in civil aircraft | — |
| 8414592550 | Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air with<br>-a direct current operating voltage of more than 10 v but not more than 14 v, or <br>-an alternating current operating voltage of more than 185 v, but not more than 254 v,<br>-an operating temperature of -40 °c or higher, but not higher than 70 °c,<br>for use in the manufacture of heat pump tumble dryers and refrigerators or freezers | 2.00 % |
| 8414592560 | Axial fan, for incorporation into instrument clusters, speedometers and infotainment systems of transport vehicles as motor vehicles of headings 8701 to 8705, with:<br>-an air flow of not more than 0,75 m3/min (cubic meter per minute) <br>-an air pressure of not more than 10 mmh2o <br>-an overall acoustic noise of not more than 45 db(a) <br>-a diameter of not more than 65mm <br>equipped with dc brushless motor with: <br>-a rated voltage between: 3 to 16 vdc <br>-an operating voltage between: 3 to 16 vdc <br>-a rated current between: 0,03 to 0,30 a <br>-an input power between: 0,3 to 1,5 w <br>-a rotation speed between: 2500 to 10000 r.p.m,<br>with or without a heat sink incorporated | 2.00 % |
| 8414592590 | Other | 2.00 % |
| 8414593510 | For use in civil aircraft | — |
| 8414593520 | Radial fan, with:<br>-a dimension of 25mm (height) x 85mm (width) x 85mm (depth),<br>-a weight of 120 g,<br>-a rated voltage of 13,6 vdc (direct current voltage),<br>-an operating voltage of 9 vdc or more but not more than 16 vdc (direct current voltage),<br>-a rated current of 1,1 a (typ),<br>-a rated power of 15 w,<br>-a rotation speed of 500 rpm (revolutions per minute) or more but not more than 4800 rpm (revolutions per minute) (free flow),<br>-an air flow of not more than 17,5 litre/s,<br>-an air pressure of not more than16 mm h2o ≈ 157 pa,<br>-an overall sound pressure of not more than 58 db(a) at 4800 rpm (revolutions per minute), and<br>with a fin (fan interconnect network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems | 2.00 % |
| 8414593530 | Electric blower for cooling the high-voltage battery of a hybrid passenger car with:<br>-a control unit,<br>-mosfet inverter,<br>-a voltage of 9 v or more but not more than 16 v,<br>-ambient temperature of - 40 °c or more, but not more than 80 °c,<br>for use in the manufacture of hybrid passenger cars | 2.00 % |
| 8414593540 | Electric blower for cooling the battery module:<br>-with an operating voltage of 9 vdc or more but not more than 16 vdc,<br>-with a centrifugal electric fan,<br>-with a connector,<br>-with a plastic case,<br>-with or without a control unit for the fan electric motor,<br>for use in the production of rechargeable batteries for hybrid and electric vehicles | 2.00 % |
| 8414593590 | Other | 2.00 % |
| 8414599510 | For use in civil aircraft | — |
| 8414599590 | Other | 2.00 % |
| 8414600000 | Hoods having a maximum horizontal side not exceeding 120 cm | 2.00 % |
| 8414700000 | Gas-tight biological safety cabinets | 0.00 % |
| 8414801110 | For use in civil aircraft | — |
| 8414801190 | Other | 2.00 % |
| 8414801910 | For use in civil aircraft | — |
| 8414801990 | Other | 2.00 % |
| 8414802210 | For use in civil aircraft | — |
| 8414802220 | Air membrane compressor with:<br>- a flow of 4,5 l/min or more, but not more than 12 l/min,<br>- power input of not more than 14 w, and<br>- a gauge pressure capacity not exceeding 400 hpa (0,4 bar) of a kind used in the production of motor vehicle seats | 2.00 % |
| 8414802290 | Other | 2.00 % |
| 8414802810 | For use in civil aircraft | — |
| 8414802890 | Other | 2.00 % |
| 8414805110 | For use in civil aircraft | — |
| 8414805190 | Other | 2.00 % |
| 8414805910 | For use in civil aircraft | — |
| 8414805990 | Other | 2.00 % |
| 8414807310 | For use in civil aircraft | — |
| 8414807330 | Hermetic rotary compressors for either hydrofluorocarbon (hfc) or hydrocarbon refrigerants:<br>- driven by ‘on-off’ single phase alternate current (ac) or ‘brushless direct current’ (bldc) variable speed motors,<br>- with a nominal power rating of not more than 1,5kw,<br>- a rated voltage of 100v or more but not more than 240v,<br>- with a height of not more than 300mm,<br>- an external diameter of not more than 150mm,<br>- with a unit weight of not more than 15kg,<br>for use in the manufacture of heat pumps for household appliances, including clothes dryers | 2.00 % |
| 8414807350 | Hermetic heat pump compressor for r450a or r290 refrigerants:<br>- not charged with refrigerant,<br>- pre-charged with lubricant oil,<br>- with a single phase induction permanent split capacitor motor or a dc brushless motor,<br>- having suction and/or discharge connections,<br>- with a displacement of 8,05 cm3 or more, but not more than 55 cm3,<br>- running at 900 rpm or more, but not more than 7 800 rpm, and<br>- with a cooling capacity of 920 w or more, but not more than 10 440 w in ashrae conditions<br> | 2.00 % |
| 8414807389 | Other | 2.00 % |
| 8414807510 | For use in civil aircraft | — |
| 8414807590 | Other | 2.00 % |
| 8414807810 | For use in civil aircraft | — |
| 8414807890 | Other | 2.00 % |
| 8414808010 | For use in civil aircraft | — |
| 8414808090 | Other | 2.00 % |
| 8414900010 | For use in civil aircraft | — |
| 8414900015 | Fan assembly made of aluminium and magnesium alloy:<br>-with an outer diameter of 54 mm or more but not more than 130 mm,<br>-with a height of 8 mm or more but not more than 30 mm,<br>-with two discs connected by blades of involute shape,<br>-with or without dowel, and with or without washer,<br>for use in the manufacture of electromotors | 2.00 % |
| 8414900020 | Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles | 2.00 % |
| 8414900025 | Scroll type compressor housing of an aluminium alloy of a kind with: <br>-a heat resistance of 200 °c or more but not more than 250 °c,<br>-one or more fixing points suitable for mounting an actuator,<br>for use in the manufacture of turbochargers | 2.00 % |
| 8414900035 | Compressor head unit made of impregnated aluminium alloy for installation in air-conditioning compressors for motor vehicles with:<br>-a width of 115 mm or more but not more than 160 mm,<br>-a length of 115 mm or more but not more than 170 mm,<br>-a height of 30 mm or more but not more than 100 mm,<br>-a piece of pressure branch with pipe connection,<br>-one or two mounting holes and<br>-more than one overflowing hole<br> | 2.00 % |
| 8414900045 | Pressure casted rotor front plate or cover of an electric supercharger:<br>-of en ac-46000 aluminium,<br>-shot-blasted and machined,<br>-with a hardness of 60 or more on the hardness brinell wolfram (hbw) scale (2,5/62,5, according to iso 6506),<br>-with a tensile strength of 240 n/mm2 or more,<br>-with a height of 22 mm or more but not more than 26 mm,<br>-with a diameter of 128 mm or more but not more than 136 mm,<br>-with a weight of 220 g or more but not more than 250 g<br> | 2.00 % |
| 8414900055 | Air conditioning compressor housing component made of aluminum alloy for installation in electric air conditioning compressors for motor vehicles:<br>-with a width of 100 mm or more but not more than 220 mm,<br>-with a length of 100 mm or more but not more than 230 mm,<br>-with a height of 80 mm or more but not more than 180 mm,<br>-with one single central bore,<br>-machined by cnc milling or unwrought,<br>-whether or not impregnated,<br>-with one suction port or without<br> | 2.00 % |
| 8414900080 | Turbocharger wheel housing of cast aluminium alloy or cast iron:<br>- with a heat resistance up to 400°c,<br>- with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel,<br>for use in the automotive industry<br> | 2.00 % |
| 8414900090 | Other | 2.00 % |