英国 · 品目· 7 个子目· 66 个税号
8483传动轴、曲柄、轴承、齿轮、变速箱、飞轮、滑轮、离合器及联轴器
Transmission shafts (including cam shafts and crank shafts) and cranks; bearing housings and plain shaft bearings; gears and gearing; ball or roller screws; gear boxes and other speed changers, including torque converters; flywheels and pulleys, including pulley blocks; clutches and shaft couplings (including universal joints)
子目（6 位 WCO 统一）
英国税号（10 位）
本品目下 英国海关的全部细分税号与首要税率
| HS 编码 | 商品描述 | 首要税率 |
|---|---|---|
| 8483102110 | For use in civil aircraft | — |
| 8483102190 | Other | 4.00 % |
| 8483102510 | For use in civil aircraft | — |
| 8483102590 | Other | 4.00 % |
| 8483102910 | For use in civil aircraft | — |
| 8483102990 | Other | 4.00 % |
| 8483105010 | For use in civil aircraft | — |
| 8483105090 | Other | 4.00 % |
| 8483109510 | For use in civil aircraft | — |
| 8483109530 | Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with:<br> -external toothing in a diametral pitch standard,<br> -17 teeth or more, but not more than 50 teeth,<br> -a diameter of 35 mm or more, but not more than 145 mm,<br> -a length of 200 mm or more, but not more than 1345 mm,<br> -a hardness of 35 hrc or more, but not more than 45 hrc | 4.00 % |
| 8483109540 | Stepped shaft made of carbon steel with: <br>-rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5',<br>-a largest diameter of 16 mm or more, but not more than 18 mm,<br>-a length of 137 mm or more, but not more than 155 mm,<br>-a weight of 0,12 kg or more, but not more than 0,28 kg<br> | 4.00 % |
| 8483109550 | Drum shaft for torque transmission, in steel (to sm45c for shaft standard and sts430 for ring standard) with:<br>-a length of 137,8 mm or more but not more than 138,2 mm,<br>-an outer diameter of 23 mm or more but not more than 48,025 mm,<br>-a weight of 1,0245 kg or more but not more than 1,0445 kg,<br>-a hardness of the shaft of 40 or more on the rockwell c hardness scale (hrc), but not more than 50 hrc,<br>-a ring hardness of 90 or more on the rockwell b hardness scale (hrb), but not more than 120 hrb,<br>-an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm<br> | 4.00 % |
| 8483109590 | Other | 4.00 % |
| 8483200000 | Bearing housings, incorporating ball or roller bearings | 6.00 % |
| 8483303210 | For use in civil aircraft | — |
| 8483303230 | Bearing housing of a kind used in turbochargers:<br>- of precision-cast grey cast iron complying with standard din en 1561 or precision-cast ductile cast iron complying with din en 1560,<br>- with oil chambers,<br>- without bearings,<br>- with a diameter of 50 mm or more, but not more than 250 mm,<br>- with a height of 40 mm or more, but not more than 150 mm,<br>- whether or not with water chambers and connectors<br> | 4.00 % |
| 8483303290 | Other | 4.00 % |
| 8483303810 | For use in civil aircraft | — |
| 8483303860 | Bearing housing of a kind used in turbochargers:<br>- of precision-cast grey cast iron complying with standard din en 1561 or precision-cast ductile cast iron complying with din en 1560,<br>- with oil chambers,<br>- without bearings,<br>- with a diameter of 50 mm or more, but not more than 250 mm,<br>- with a height of 40 mm or more, but not more than 150 mm,<br>- whether or not with water chambers and connectors<br> | 2.00 % |
| 8483303899 | Other | 2.00 % |
| 8483308010 | For use in civil aircraft | — |
| 8483308090 | Other | 2.00 % |
| 8483402110 | For use in civil aircraft | 0.00 % |
| 8483402190 | Other | 0.00 % |
| 8483402310 | For use in civil aircraft | 0.00 % |
| 8483402320 | Bevel gear:<br>-made of lightweight alloys and steel,<br>-built on straight or helical bevel gears,<br>-with an angle between the shafts of 30 degrees or more but not more than 90 degrees<br>-with a gear 1:1,3 ratio or more but not more than 1:1,46,<br>for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery | 0.00 % |
| 8483402330 | Bevel gear:<br>-made of lightweight alloys and steel,<br>-built on straight bevel gears,<br>-with an angle between the shafts of 24 degrees or more but not more than 35 degrees,<br>for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery | 0.00 % |
| 8483402390 | Other | 0.00 % |
| 8483402510 | For use in civil aircraft | 0.00 % |
| 8483402520 | Worm gearbox<br>-in an aluminium alloy housing,<br>-with a plastic or steel worm,<br>-with mounting holes,<br>-with a 90 degree reversible drive direction,<br>-with a 4:19 transmission ratio,<br>-equipped with a lead screw with a length of 310 mm or more but not more than 380 mm,<br>-with a guide nut incorporated into the assembly bracket,<br>-with or without a lead screw support,<br>for indirect connection to the drive motor of a car seat guide system | 0.00 % |
| 8483402590 | Other | 0.00 % |
| 8483402910 | For use in civil aircraft | 0.00 % |
| 8483402950 | Gear set of cycloid gear type with:<br>- a rated torque of 50 nm or more but not more than 9 000 nm,<br>- standard ratios of 1:50 or more but not more than 1:475,<br>- lost motion of not more than one arc minute,<br>- an efficiency of more than 80 %<br>of a kind used in robot arms<br> | 0.00 % |
| 8483402960 | Epicyclic gearing, of a kind used in driving hand-held power tools with:<br>- a rated torque of 25 nm or more, but not more than 70 nm,<br>- standard gear ratios of 1:12.7 or more, but not more than 1:65.3 | 0.00 % |
| 8483402970 | Cast steel planetary cage, with:<br> -external or internal toothing in a diametral pitch standard,<br> -27 teeth or more, but not more than 70 teeth,<br> -a diameter of 300 mm or more, but not more than 725 mm,<br> -a length of 225 mm or more, but not more than 800 mm,<br> -3 or 4 planetary gears,<br> -a hardness of 40 hrc or more, but not more than 45 hrc | 0.00 % |
| 8483402989 | Other | 0.00 % |
| 8483403010 | For use in civil aircraft | 0.00 % |
| 8483403090 | Other | 0.00 % |
| 8483405110 | For use in civil aircraft | 0.00 % |
| 8483405190 | Other | 0.00 % |
| 8483405910 | For use in civil aircraft | 0.00 % |
| 8483405930 | Hydrostatic speed changer:<br>-with a hydro pump and a differential with wheel axle,<br>-whether or not with a fan impeller and/or a pulley,<br>for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 20 | 0.00 % |
| 8483405990 | Other | 0.00 % |
| 8483409010 | For use in civil aircraft | 0.00 % |
| 8483409080 | Transmission gearbox, with:<br>- not more than 3 gears,<br>- an automatic deceleration system and<br>- a power reversal system, <br>for use in the manufacture of goods of heading 8427 | 0.00 % |
| 8483409099 | Other | 0.00 % |
| 8483502010 | For use in civil aircraft | 0.00 % |
| 8483502090 | Other | 0.00 % |
| 8483508010 | For use in civil aircraft | 0.00 % |
| 8483508020 | Pulley blocks of non-cast steel:<br>- made of structural carbon steel complying with standard jis g4051,<br>- with an external diameter of 104mm or more but not more than 142mm,<br>- with an internal diameter of 33mm or more but not more than 37mm,<br>- with a width of 22mm or more but not more than 40mm,<br>- with a weight of 0,4kg or more but not more than 1,6kg,<br>- with 6 trapezoidal grooves | 0.00 % |
| 8483508030 | Mechanical tensioner for maintaining the tension of the drive belts of a passenger car engine:<br> -with two pulleys made of polyamide, each of them with a diameter of 50 mm or more but not more than 70 mm,<br> -with a spring made of a steel alloy containing chromium and silicon,<br> -with two arms made of aluminum,<br> -with a holder made of aluminum,<br> for use in the manufacture of motor vehicle engines | 0.00 % |
| 8483508040 | Flywheel designed for damping torsional vibrations and oscillations within a vehicle drivetrain with:<br>-a total moment of inertia of 0.082 kg⋅m²,<br>-a weight of 7 kg or more, but not more than 8 kg,<br>-a diameter of 250 mm or more, but not more than 280 mm,<br>for use in the manufacture of motor vehicles | 0.00 % |
| 8483508090 | Other | 0.00 % |
| 8483602010 | For use in civil aircraft | 0.00 % |
| 8483602090 | Other | 0.00 % |
| 8483608010 | For use in civil aircraft | 0.00 % |
| 8483608090 | Other | 0.00 % |
| 8483902010 | For use in civil aircraft | 0.00 % |
| 8483902090 | Other | 0.00 % |
| 8483908110 | For use in civil aircraft | 0.00 % |
| 8483908190 | Other | 0.00 % |
| 8483908910 | For use in civil aircraft | 0.00 % |
| 8483908920 | Sprocket for continuous variable valve timing to optimize the process of filling the cylinders of an internal combustion engine with:<br>-case,<br>-rotor,<br>-at least 4 screws,<br>-spring,<br>-of an external diameter of 80 mm or more but not exceeding 95 mm,<br>-of a thickness of 25 mm or more but not more than 35 mm,<br>for use in the manufacture of engines of motor vehicles | 0.00 % |
| 8483908930 | Forged steel sprockets with external toothing, whether or not with internal splines in a diametral pitch standard, with:<br> -a diameter of 400 mm or more, but not more than 630 mm,<br> -7 teeth or more, but not more than 15 teeth,<br> -a tooth core hardness of 28 hrc or more, but not more than 45 hrc,<br> -a tooth surface hardness of 50 hrc or more, but not more than 60 hrc,<br> -whether or not, a spline hardness of 30 hrc or more, but not more than 45 hrc,<br> -an effective carburized case depth of 4 mm or more, but not more than 5 mm | 0.00 % |
| 8483908940 | Steel alloy gear wheels with straight teeth and involute profile, with:<br> -external and/or internal toothing in a diametral pitch standard,<br> -a diameter of 35 mm or more, but not more than 600 mm,<br> -13 teeth or more, but not more than 80 teeth,<br> -a tooth core hardness of 28 hrc or more, but not more than 45 hrc,<br> -a tooth surface hardness of 50 hrc or more, but not more than 65 hrc,<br> -an effective carburized case depth of 1,00 mm or more, but not more than 3,1 mm,<br> -a spline hardness of 27 hrc or more, but not more than 62 hrc,<br> -whether or not in combination with a shaft with a spline hardness of 27 hrc or more, but not more than 62 hrc | 0.00 % |
| 8483908990 | Other | 0.00 % |