What product does HS code 8501510045 refer to?

HS 8501510045 falls under Chapter 85 (Electrical machinery; electronics), heading 8501 (Electric motors and generators (excluding generating sets)). Specifically: Automotive-ready brushless permanently excited magnet synchronous alternating current motor with: -a specified speed .

What documents are required to import HS 8501510045 into United Kingdom?

Typically required: commercial invoice, packing list, bill of lading / airway bill, certificate of origin (for preferential rates). Confirm latest requirements with United Kingdom Customs.

How to calculate landed cost for importing HS 8501510045 into United Kingdom?

Use CIF (goods + freight + insurance) × 0.00 % = import duty. Then add VAT 20.00 % = landed cost. Treayo provides an online calculator at https://treayo.com/en/calculator/uk.

WCO classification path

Chapter85Electrical machinery; electronics
Heading8501Electric motors and generators (excluding generating sets)
Subheading850151Other AC motors, multi-phase
National8501510045Automotive-ready brushless permanently excited magnet synchronous alternating current motor with: -a specified speed of not more than 7000 rpm, -an output of 400 w or more but not more than 750 w (at 12 v), -a flange diameter of 80 mm or more, but not more than 200 mm, -a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end, -a housing length of not more than 265 mm, measured from the flange to the outer end, -a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with o-ring and protective grease or liquid seal interface), -a stator with single t-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets, -whether or not with electronic power steering controller, -whether or not with pulley or coupling, -whether or not with rotor position sensor

8501510045

ACTIVE

What is the United Kingdom import tariff for HS 8501510045 (Automotive-ready brushless permanently excited mag)?

Quick answer: United Kingdom Import duty (third-country) for HS 8501510045 is 0.00 %, plus VAT 20.00 %.

"Automotive-ready brushless permanently excited magnet synchronous alternating current motor with: -a specified speed of not more than 7000 rpm, -an output of 400 w or more but not more than 750 w (at 12 v), -a flange diameter of 80 mm or more, but not more than 200 mm, -a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end, -a housing length of not more than 265 mm, measured from the flange to the outer end, -a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with o-ring and protective grease or liquid seal interface), -a stator with single t-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets, -whether or not with electronic power steering controller, -whether or not with pulley or coupling, -whether or not with rotor position sensor "

HS code 8501510045 (Chapter 85 "Electrical machinery; electronics"; Heading 8501 "Electric motors and generators (excluding generating sets)"; Subheading 850151 "Other AC motors, multi-phase") under the United Kingdom tariff schedule classifies "Automotive-ready brushless permanently excited magnet synchronous alternating current motor with: -a specified speed of not more than 7000 rpm, -an output of 400 w or more but not more than 750 w (at 12 v), -a flange diameter of 80 mm or more, but not more than 200 mm, -a maximum length of not more than 335 mm, measured from the beginning of the shaft to its outer end, -a housing length of not more than 265 mm, measured from the flange to the outer end, -a steel sheet or die-cast aluminium basic housing consisting of not more than two parts, including electrical components and a flange with two or more but not more than 11 holes, whether or not with a sealing connection (groove with o-ring and protective grease or liquid seal interface), -a stator with single t-tooth design and single coil winding with 9/6 or 12/10 or 12/8 topology and surface magnets, -whether or not with electronic power steering controller, -whether or not with pulley or coupling, -whether or not with rotor position sensor ". United Kingdom customs apply Import duty (third-country) of 0.00 %, VAT 20.00 %. Statutory unit of measure: Number of items.