HS Code	Description	Primary rate
3920621200	Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates	—
3920621905	Poly(ethylene terephthalate) film in rolls:<br>- with a thickness of 0,335 mm or more but not more than 0,365 mm, and<br>- coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm<br>	6.00 %
3920621908	Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either:<br>- only dyed in the mass, or<br>- dyed in the mass and metallised on one side<br>	6.00 %
3920621928	Non-transparent poly(ethylene terephthalate) film:<br>-each outer layer with a thickness of 7 nm or more but not more than 80 nm,<br>-with a tensile strength of 300 n/cm or more (astm d-882),<br>-with a total thickness of 200 µm or more but not more than 350 µm, and<br>-with a width of 600 mm or more but not more than 1 600 mm<br>- covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites	6.00 %
3920621932	Transparent poly(ethylene terephthalate) film:<br>-having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not,<br>-with a surface tension of 36 dyne/cm or more but not more than 39 dyne/cm, or transparent 3 or 4 layers, second layer of pet, and other layers contain fluorine resin, <br>-with a light transmittance of more than 70 %, <br>-with a haze value of not more than 1,3 %,<br>-with a total thickness of 10 µm or more but not more than 350 µm, <br>-with a width of 800 mm or more but not more than 1 600 mm<br>	6.00 %
3920621938	Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm	6.00 %
3920621948	Sheets or rolls of poly(ethylene terephthalate):<br>- coated on both sides with a layer of epoxy acrylic resin,<br>- of a total thickness of 37 μm (± 3 μm)<br>	6.00 %
3920621952	Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 µm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the astm d 257 method)	6.00 %
3920621960	Poly (ethylene terephtalate) film:<br>- of a thickness of not more than 20 µm,<br>- coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm<br>	6.00 %
3920621979	Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with<br>-a thickness of 0.07 mm or more but not more than 0.15 mm<br>-a width of 762 mm or more but not more than 1350 mm<br>	6.00 %
3920621985	Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (fcc) (eva) layer, a 275 µm polyethylene terephthalate (pet) layer and a 25 µm fluorinated polymer (fcc) layer with:<br>-a total thickness of 300 µm or more, but not more than 330 µm,<br>-a tensile strength of 375 n/cm or more in both the longitudinal and transverse directions (astm d-882), <br>-a low thermal shrinkage of 1 % or less at 150 °c for 30 minutes,<br>-a low water vapor permeability of 2,5 g/m²•d or less, and<br>-a high breakdown voltage of 18 kv or more and <br>-a partial discharge voltage of 1500 vdc or more (bg/t 123542.2-2009)<br>to be used as a protective layer on the back of photovoltaic modules	6.00 %
3920621999	Other	6.00 %
3920629010	Poly(ethylene terephthalate) film in rolls:<br>- with a thickness of 0,335 mm or more but not more than 0,365 mm, and<br>- coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm<br>	6.00 %
3920629090	Other	6.00 %