HS Code	Description	Primary rate
3920992100	Polyimide foil and strip, uncoated, or coated or covered solely with plastic	0.00 %
3920992840	Polymer film containing the following monomers:<br>- poly (tetramethylene ether glycol),<br>- bis (4-isocyanotocyclohexyl) methane,<br>- 1,4-butanediol or 1,3-butanediol,<br>- with a thickness of 0,25 mm or more but not more than 5,0 mm,<br>- embossed with a regular pattern on one surface,<br>- and covered with a release sheet<br>	6.00 %
3920992850	Thermoplastic polyurethane film (tpu) based on an aliphatic polycaprolactone (pcl), transparently backed on one side with a removable protective film (pet film), with a light transmission of more than 93% (according to din en iso 13468-1), with a thickness of 25μm or more but not more than 500μm	6.00 %
3920992865	Matt, thermoplastic polyurethane foil in rolls with:<br>- a width of 1640 mm (± 10 mm),<br>- a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method astm d2457),<br>- a surface roughness of 1,9 ra or more but not more than 2,8 ra (as determined by the method iso 4287),<br>- a thickness of more than 365 µm but not more than 760 µm,<br>- a hardness of 90 (± 4) (as determined by the method: shore a (astm d2240)),<br>- an elongation to break of 470 % (as determined by the method: en iso 527)<br>	6.00 %
3920992870	Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:<br>- microspheres with a coating of metal, whether or not alloyed with gold,<br>- an adhesive layer,<br>- with a protective layer of silicone or poly(ethylene terephthalate) on one side, <br>- with a protective layer of poly(ethylene terephthalate) on the other side, and<br>- with a width of 5 cm or more but not more than 100 cm<br>- with a length of not more than 2 000 m	6.00 %
3920992890	Other	6.00 %
3920995200	Poly(vinyl fluoride) sheet; biaxially oriented poly(vinyl alcohol) film, containing by weight 97 % or more of poly(vinyl alcohol), uncoated, of a thickness not exceeding 1 mm	0.00 %
3920995300	Ion-exchange membranes of fluorinated plastic material, for use in chlor-alkali electrolytic cells	—
3920995910	For use in certain types of aircraft	6.00 %
3920995925	Poly(1-chlorotrifluoroethylene) film	6.00 %
3920995965	Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 µm or more but not more than 90 µm, a tensile strength at break of 20 mpa or more but not more than 55 mpa and an elongation at break of 250 % or more but not more than 900 %	6.00 %
3920995990	Other	6.00 %
3920999000	Other	6.00 %