HS Code	Description	Primary rate
8483102110	For use in civil aircraft	—
8483102190	Other	4.00 %
8483102510	For use in civil aircraft	—
8483102590	Other	4.00 %
8483102910	For use in civil aircraft	—
8483102990	Other	4.00 %
8483105010	For use in civil aircraft	—
8483105090	Other	4.00 %
8483109510	For use in civil aircraft	—
8483109530	Steel alloy splined shaft (torque shaft) with straight teeth and involute profile, with:<br> -external toothing in a diametral pitch standard,<br> -17 teeth or more, but not more than 50 teeth,<br> -a diameter of 35 mm or more, but not more than 145 mm,<br> -a length of 200 mm or more, but not more than 1345 mm,<br> -a hardness of 35 hrc or more, but not more than 45 hrc	4.00 %
8483109540	Stepped shaft made of carbon steel with: <br>-rolled, involute profiled, splined shaft end, the helix angle of which is at least 0°15,5' but not more than 0° 21,5',<br>-a largest diameter of 16 mm or more, but not more than 18 mm,<br>-a length of 137 mm or more, but not more than 155 mm,<br>-a weight of 0,12 kg or more, but not more than 0,28 kg<br>	4.00 %
8483109550	Drum shaft for torque transmission, in steel (to sm45c for shaft standard and sts430 for ring standard) with:<br>-a length of 137,8 mm or more but not more than 138,2 mm,<br>-an outer diameter of 23 mm or more but not more than 48,025 mm,<br>-a weight of 1,0245 kg or more but not more than 1,0445 kg,<br>-a hardness of the shaft of 40 or more on the rockwell c hardness scale (hrc), but not more than 50 hrc,<br>-a ring hardness of 90 or more on the rockwell b hardness scale (hrb), but not more than 120 hrb,<br>-an external 37-teeth spline with major diameter of 41 mm or more but not more than 48 mm<br>	4.00 %
8483109590	Other	4.00 %