HS Code	Description	Primary rate
8507903110	For use in civil aircraft	—
8507903120	Separator for the manufacture of lithium-ion batteries, in rolls, made of transparent, microporous, acrylic acid grafted polyethylene film, with:<br>-a width of 98 mm or more but not more than 170 mm,<br>-a thickness of 15 µm or more but not more than 36 µm<br>	2.00 %
8507903130	Separator for the manufacture of lithium-ion batteries, in rolls, made of microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:<br>-zero transversal production direction (td) shrinkage,<br>-a total thickness of 8 μm or more, but not more than 40 μm,<br>-a width of 15 mm or more, but not more than 900 mm,<br>-a length of more than 200 m, but not more than 8 000 m,<br>-an average pore size between 0,02 μm and 0,1 μm,<br>-whether or not coated with surfactant,<br>-whether or not coated on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,<br>-whether or not coated on 1 or 2 sides with a sticky binder, pvdf type or similar of min 0,5 μm thickness or more, but not more than 5 μm<br>	2.00 %
8507903140	Separator for the manufacture of lithium-ion batteries made of a multi-porous multilayer separator foil with:<br>-one microporous polyethylene layer between two microporous polypropylene layers and whether or not coated with aluminium oxide on both sides,<br>-a width of 65 mm or more but not more than 170 mm,<br>-a total thickness of 10 µm or more but not more than 30 µm,<br>-a porosity of 25 % (vol.) or more but not more than 65 % (vol.)<br>	2.00 %
8507903190	Other	2.00 %
8507903910	For use in civil aircraft	—
8507903990	Other	2.00 %
8507908010	For use in civil aircraft	—
8507908055	Top cap or housing made of aluminium or ferrous alloy or stainless steel: <br>-whether or not including parts made of aluminum and aluminium alloy,<br>-with or without sealing elements or other elements made of polymer material,<br>-with or without a "current interrupt device " and an "evacuation valve"<br>-with or without plastic sockets<br>-with an outer diameter of 17 mm or more, but not more than 18 mm,<br>or rectangular with:<br>-length not greater than 450 mm,<br>-width not greater than 200 mm, and<br>-hight not greater than 150 mm,<br>for use in the manufacture of lithium-ion batteries	2.00 %
8507908090	Other	2.00 %