菲律宾 · 第 72· 200 条目
§72钢铁
第 XV 类贱金属及其制品 · 第 72–83 章（WCO HS）
本章品目（4 位 WCO 统一）
29 个品目
7201生铁及镜铁，块、锭或其他初级形状→7202铁合金→7203直接还原铁、其他海绵状黑色金属及高纯铁→7204黑色金属废碎料；钢铁再熔废碎料锭→7205生铁、镜铁、钢铁颗粒及粉末→7206钢铁及非合金钢锭或其他初级形状→7207钢铁或非合金钢半制品→7208宽度≥600毫米的钢铁或非合金钢热轧扁平材，未包、镀或涂层→7209宽度≥600毫米的钢铁或非合金钢冷轧扁平材，未包、镀或涂层→7210宽度≥600毫米的钢铁或非合金钢扁平材，已包、镀或涂层→7211宽度<600毫米的钢铁或非合金钢扁平材，未包、镀或涂层→7212宽度<600毫米的钢铁或非合金钢扁平材，已包、镀或涂层→7213钢铁或非合金钢热轧不规则盘卷盘条→7214钢铁或非合金钢其他条、杆，经锻、热轧、热拉或热挤压，或轧后扭曲→7215钢铁或非合金钢其他条、杆→7216钢铁或非合金钢型钢→7217钢铁或非合金钢丝→7218不锈钢锭、其他初级形状及半制品→7219不锈钢平板轧材，宽度≥600毫米→7220不锈钢平板轧材，宽度<600毫米→7221不锈钢热轧不规则盘卷的条、杆→7222其他不锈钢条、杆；不锈钢角材、型材及异型材→7223不锈钢丝→7224其他合金钢锭、其他初级形状及半制品→7225其他合金钢平板轧材，宽度≥600毫米→7226其他合金钢平板轧材，宽度<600毫米→7227其他合金钢热轧不规则盘卷的条、杆→7228其他合金钢条、杆、型材及空心钻杆→7229其他合金钢丝→
菲律宾 税号（前 200 条）
本章共 377 条，继续浏览请点进上方品目| HS 编码 | 商品描述 | 首要税率 | |
|---|---|---|---|
| 7201.10.00 | - Non-alloy pig iron containing by weight 0.5 % or less of phosphorus | 1% | → |
| 7201.20.00 | - Non-alloy pig iron containing by weight more than 0.5 % of phosphorus | 1% | → |
| 7201.50.00 | - Alloy pig iron; spiegeleisen | 1% | → |
| 7202.11.00 | - - Containing by weight more than 2 % of carbon | 1% | → |
| 7202.19.00 | - - Other | 1% | → |
| 7202.21.00 | - - Containing by weight more than 55 % of silicon | 1% | → |
| 7202.29.00 | - - Other | 1% | → |
| 7202.30.00 | - Ferro-silico-manganese | 1% | → |
| 7202.41.00 | - - Containing by weight more than 4 % of carbon | 1% | → |
| 7202.49.00 | - - Other | 1% | → |
| 7202.50.00 | - Ferro-silico-chromium | 1% | → |
| 7202.60.00 | - Ferro-nickel | 1% | → |
| 7202.70.00 | - Ferro-molybdenum | 1% | → |
| 7202.80.00 | - Ferro-tungsten and ferro-silico-tungsten | 1% | → |
| 7202.91.00 | - - Ferro-titanium and ferro-silico-titanium | 1% | → |
| 7202.92.00 | - - Ferro-vanadium | 1% | → |
| 7202.93.00 | - - Ferro-niobium | 1% | → |
| 7202.99.00 | - - Other | 1% | → |
| 7203.10.00 | - Ferrous products obtained by direct reduction of iron ore | 3% | → |
| 7203.90.00 | - Other | 3% | → |
| 7204.10.00 | - Waste and scrap of cast iron | 0% | → |
| 7204.21.00 | - - Of stainless steel | 1% | → |
| 7204.29.00 | - - Other | 1% | → |
| 7204.30.00 | - Waste and scrap of tinned iron or steel | 1% | → |
| 7204.41.00 | - - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | 1% | → |
| 7204.49.00 | - - Other | 1% | → |
| 7204.50.00 | - Remelting scrap ingots | 1% | → |
| 7205.10.00 | - Granules | 1% | → |
| 7205.21.00 | - - Of alloy steel | 3% | → |
| 7205.29.00 | - - Other | 1% | → |
| 7206.10.10 | - - Containing by weight more than 0.6 % of carbon | 3% | → |
| 7206.10.90 | - - Other | 3% | → |
| 7206.90.00 | - Other | 3% | → |
| 7207.11.00 | - - Of rectangular (including square) cross-section, the width measuring less than twice the thickness | 0% | → |
| 7207.12.10 | - - - Slabs | 0% | → |
| 7207.12.90 | - - - Other | 0% | → |
| 7207.19.00 | - - Other | 0% | → |
| 7207.20.10 | - - - Slabs | 0% | → |
| 7207.20.21 | - - - - Blocks roughly shaped by forging; sheet bars | 0% | → |
| 7207.20.29 | - - - - Other | 0% | → |
| 7207.20.91 | - - - Slabs | 0% | → |
| 7207.20.92 | - - - - Blocks roughly shaped by forging; sheet bars | 0% | → |
| 7207.20.99 | - - - - Other | 0% | → |
| 7208.10.00 | - In coils, not further worked than hot-rolled, with patterns in relief | 0% | → |
| 7208.25.00 | - - Of a thickness of 4.75 mm or more | 0% | → |
| 7208.26.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 0% | → |
| 7208.27.11 | - - - - Containing by weight 0.6 % or more of carbon | 0% | → |
| 7208.27.19 | - - - - Other | 0% | → |
| 7208.27.91 | - - - - Containing by weight 0.6 % or more of carbon | 0% | → |
| 7208.27.99 | - - - - Other | 0% | → |
| 7208.36.00 | - - Of a thickness exceeding 10 mm | 0% | → |
| 7208.37.00 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | 0% | → |
| 7208.38.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 0% | → |
| 7208.39.10 | - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | 0% | → |
| 7208.39.20 | - - - Containing by weight less than 0.6 % of carbon and of a thickness more than 0.17 mm but not exceeding 1.5 mm | 0% | → |
| 7208.39.30 | - - - Containing by weight 0.6 % or more of carbon and of a thickness not exceeding 1.5 mm | 0% | → |
| 7208.39.40 | - - - Of a thickness more than 2 mm, maximum tensile strength of 550 Mpa and of a width not exceeding 1,250 mm | 0% | → |
| 7208.39.90 | - - - Other | 0% | → |
| 7208.40.00 | - Not in coils, not further worked than hot-rolled, with patterns in relief | 0% | → |
| 7208.51.00 | - - Of a thickness exceeding 10 mm | 0% | → |
| 7208.52.00 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | 0% | → |
| 7208.53.00 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 0% | → |
| 7208.54.10 | - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | 0% | → |
| 7208.54.90 | - - - Other | 0% | → |
| 7208.90.10 | - - Corrugated | 0% | → |
| 7208.90.20 | - - Other, containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | 0% | → |
| 7208.90.90 | - - Other | 0% | → |
| 7209.15.00 | - - Of a thickness of 3 mm or more | 0% | → |
| 7209.16.10 | - - - Of a width not exceeding 1,250 mm | 0% | → |
| 7209.16.90 | - - - Other | 0% | → |
| 7209.17.10 | - - - Of a width not exceeding 1,250 mm | 0% | → |
| 7209.17.90 | - - - Other | 0% | → |
| 7209.18.10 | - - - Tin-mill blackplate | 3 (01 Jan - 11 Dec); 0 (12 Dec - 31 Dec) | → |
| 7209.18.91 | - - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | 0% | → |
| 7209.18.99 | - - - - Other | 0% | → |
| 7209.25.00 | - - Of a thickness of 3 mm or more | 0% | → |
| 7209.26.10 | - - - Of a width not exceeding 1,250 mm | 0% | → |
| 7209.26.90 | - - - Other | 0% | → |
| 7209.27.10 | - - - Of a width not exceeding 1,250 mm | 0% | → |
| 7209.27.90 | - - - Other | 0% | → |
| 7209.28.10 | - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | 0% | → |
| 7209.28.90 | - - - Other | 0% | → |
| 7209.90.10 | - - Corrugated | 0% | → |
| 7209.90.90 | - - Other | 0% | → |
| 7210.11.10 | - - - Containing by weight 0.6 % or more of carbon | 0% | → |
| 7210.11.90 | - - - Other | 0% | → |
| 7210.12.10 | - - - Containing by weight 0.6 % or more of carbon | 0% | → |
| 7210.12.90 | - - - Other | 0% | → |
| 7210.20.10 | - - Containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less | 3% | → |
| 7210.20.90 | - - Other | 3% | → |
| 7210.30.11 | - - - Of a thickness not exceeding 1.2 mm | 3% | → |
| 7210.30.12 | - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 3% | → |
| 7210.30.19 | - - - Other | 3% | → |
| 7210.30.91 | - - - Of a thickness not exceeding 1.2 mm | 3% | → |
| 7210.30.99 | - - - Other | 3% | → |
| 7210.41.11 | - - - - Of a thickness not exceeding 1.2 mm | 10% | → |
| 7210.41.12 | - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 10% | → |
| 7210.41.19 | - - - - Other | 10% | → |
| 7210.41.91 | - - - - Of a thickness not exceeding 1.2 mm | 10% | → |
| 7210.41.99 | - - - - Other | 10% | → |
| 7210.49.11 | - - - - Coated with zinc by the iron-zinc alloyed coating method, containing by weight less than 0.04 % of carbon and of a thickness not exceeding 1.2 mm | 10% | → |
| 7210.49.14 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness not exceeding 1.2 mm | 10% | → |
| 7210.49.15 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 10% | → |
| 7210.49.16 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.5 mm | 10% | → |
| 7210.49.17 | - - - - Other, of a thickness not exceeding 1.2 mm | 10% | → |
| 7210.49.18 | - - - - Other, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 10% | → |
| 7210.49.19 | - - - - Other | 10% | → |
| 7210.49.91 | - - - - Of a thickness not exceeding 1.2 mm | 10% | → |
| 7210.49.99 | - - - - Other | 10% | → |
| 7210.50.00 | - Plated or coated with chromium oxides or with chromium and chromium oxides | 1% | → |
| 7210.61.11 | - - - - Of a thickness not exceeding 1.2 mm | 10% | → |
| 7210.61.12 | - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 10% | → |
| 7210.61.19 | - - - - Other | 10% | → |
| 7210.61.91 | - - - - Of a thickness not exceeding 1.2 mm | 10% | → |
| 7210.61.92 | - - - - Other, corrugated | 10% | → |
| 7210.61.99 | - - - - Other | 10% | → |
| 7210.69.11 | - - - - Of a thickness not exceeding 1.2 mm | 10% | → |
| 7210.69.19 | - - - - Other | 10% | → |
| 7210.69.91 | - - - - Of a thickness not exceeding 1.2 mm | 10% | → |
| 7210.69.99 | - - - - Other | 10% | → |
| 7210.70.12 | - - - Painted after coating with zinc | 10% | → |
| 7210.70.13 | - - - Painted after coating with aluminium-zinc alloys | 10% | → |
| 7210.70.19 | - - - Other | 10% | → |
| 7210.70.21 | - - - Painted | 10% | → |
| 7210.70.29 | - - - Other | 10% | → |
| 7210.70.91 | - - - Painted | 10% | → |
| 7210.70.99 | - - - Other | 10% | → |
| 7210.90.10 | - - Containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less | 3% | → |
| 7210.90.90 | - - Other | 3% | → |
| 7211.13.12 | - - - - Corrugated | 0% | → |
| 7211.13.13 | - - - - Hoop and strip | 0% | → |
| 7211.13.14 | - - - - Universal plates | 0% | → |
| 7211.13.19 | - - - - Other | 0% | → |
| 7211.13.92 | - - - - Hoop and strip | 0% | → |
| 7211.13.93 | - - - - Universal plates | 0% | → |
| 7211.13.99 | - - - - Other | 0% | → |
| 7211.14.14 | - - - - Corrugated | 0% | → |
| 7211.14.15 | - - - - Coils for re-rolling | 0% | → |
| 7211.14.16 | - - - - Hoop and strip | 0% | → |
| 7211.14.17 | - - - - Universal plates | 0% | → |
| 7211.14.19 | - - - - Other | 0% | → |
| 7211.14.94 | - - - - Hoop and strip | 0% | → |
| 7211.14.95 | - - - - Universal plates | 0% | → |
| 7211.14.99 | - - - - Other | 0% | → |
| 7211.19.13 | - - - - Hoop and strip; universal plates | 0% | → |
| 7211.19.14 | - - - - Corrugated | 0% | → |
| 7211.19.19 | - - - - Other | 0% | → |
| 7211.19.91 | - - - - Hoop and strip; universal plates | 0% | → |
| 7211.19.99 | - - - - Other | 0% | → |
| 7211.23.10 | - - - Corrugated | 0% | → |
| 7211.23.20 | - - - Hoop and strip, of a width not exceeding 400 mm | 0% | → |
| 7211.23.30 | - - - Other, of a thickness of 0.17 mm or less | 0% | → |
| 7211.23.90 | - - - Other | 0% | → |
| 7211.29.10 | - - - Corrugated | 0% | → |
| 7211.29.20 | - - - Hoop and strip, of a width not exceeding 400 mm | 0% | → |
| 7211.29.30 | - - - Other, of a thickness of 0.17 mm or less | 0% | → |
| 7211.29.90 | - - - Other | 0% | → |
| 7211.90.11 | - - - Hoop and strip, of a width not exceeding 25 mm | 0% | → |
| 7211.90.12 | - - - Hoop and strip, of a width exceeding 400 mm | 0% | → |
| 7211.90.13 | - - - Corrugated | 0% | → |
| 7211.90.14 | - - - Other, of a thickness of 0.17 mm or less | 0% | → |
| 7211.90.19 | - - - Other | 0% | → |
| 7211.90.91 | - - - Of a thickness of 0.17 mm or less | 0% | → |
| 7211.90.99 | - - - Other | 0% | → |
| 7212.10.11 | - - - Hoop and strip, of a width not exceeding 25 mm | 0% | → |
| 7212.10.14 | - - - Hoop and strip, of a width exceeding 400 mm | 0% | → |
| 7212.10.19 | - - - Other | 0% | → |
| 7212.10.94 | - - - Hoop and strip, of a width not exceeding 400 mm | 0% | → |
| 7212.10.99 | - - - Other | 0% | → |
| 7212.20.10 | - - Hoop and strip, of a width not exceeding 400 mm | 3% | → |
| 7212.20.20 | - - Other, containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less | 3% | → |
| 7212.20.90 | - - Other | 3% | → |
| 7212.30.11 | - - - Hoop and strip, of a width not exceeding 25 mm | 10% | → |
| 7212.30.12 | - - - Hoop and strip, of a width exceeding 25 mm and not exceeding 400 mm | 10% | → |
| 7212.30.13 | - - - Other, of a thickness of 1.5 mm or less | 10% | → |
| 7212.30.14 | - - - Other, coated with zinc by the iron-zinc alloy coating method, containing by weight less than 0.04 % of carbon | 10% | → |
| 7212.30.19 | - - - Other | 10% | → |
| 7212.30.90 | - - Other | 10% | → |
| 7212.40.11 | - - - Hoop and strip, of a width not exceeding 400 mm | 10% | → |
| 7212.40.12 | - - - Other hoop and strip | 10% | → |
| 7212.40.13 | - - - Other, painted after coating with zinc | 10% | → |
| 7212.40.14 | - - - Other, painted after coating with aluminium-zinc alloys | 10% | → |
| 7212.40.19 | - - - Other | 10% | → |
| 7212.40.91 | - - - Hoop and strip, of a width not exceeding 400 mm | 10% | → |
| 7212.40.99 | - - - Other | 10% | → |
| 7212.50.14 | - - - Hoop and strip, of a width exceeding 25 mm; universal plates | 1% | → |
| 7212.50.19 | - - - Other | 1% | → |
| 7212.50.23 | - - - Hoop and strip, of a width not exceeding 25 mm | 10% | → |
| 7212.50.24 | - - - Other hoop and strip; universal plates | 10% | → |
| 7212.50.29 | - - - Other | 10% | → |
| 7212.50.93 | - - - Hoop and strip, of a width not exceeding 25 mm | 10% | → |
| 7212.50.94 | - - - Other hoop and strip; universal plates | 10% | → |
| 7212.50.99 | - - - Other | 10% | → |
| 7212.60.11 | - - - Hoop and strip | 3% | → |
| 7212.60.12 | - - - Other, of a thickness of 1.5 mm or less | 3% | → |
| 7212.60.19 | - - - Other | 3% | → |
| 7212.60.91 | - - - Hoop and strip | 3% | → |
| 7212.60.99 | - - - Other | 3% | → |
| 7213.10.10 | - - Of circular cross-section measuring not exceeding 50 mm in diameter | 7% | → |
| 7213.10.90 | - - Other | 7% | → |