英国 · 第 87· 200 条目
§87非铁道车辆
第 XVII 类车辆、航空器、船舶及运输设备 · 第 86–89 章（WCO HS）
本章品目（4 位 WCO 统一）
16 个品目
8701拖拉机→8702载客十人或十人以上机动车辆→8703轿车及主要载人机动车辆→8704载货机动车辆→8705特种用途机动车辆→8706装有发动机的底盘→8707车身(包括驾驶室)→8708机动车辆的零件、附件→8709工厂、仓库等短途运输用机动工业车辆；站台牵引车及其零件→8710工厂、仓库等短途运输用机动工业车辆；站台牵引车及其零件→8711摩托车（包括轻便摩托车）及装有辅助发动机的脚踏车，不论是否装有边车→8712自行车及其他非机动脚踏车（包括送货三轮车）→8713残疾人用车，不论是否装有发动机或其他机械驱动装置→8714税目8711至8713所列车辆的零件、附件→8715婴儿车及其零件→8716挂车及半挂车；其他非机械驱动车辆；上述车辆的零件→
英国 税号（前 200 条）
本章共 366 条，继续浏览请点进上方品目| HS 编码 | 商品描述 | 首要税率 | |
|---|---|---|---|
| 8700000000 | Vehicles other than railway or tramway rolling stock, and parts and accessories thereof | — | → |
| 8701100000 | Single axle tractors | 2.00 % | → |
| 8701211000 | New | 10.00 % | → |
| 8701219000 | Used | 10.00 % | → |
| 8701221000 | New | 10.00 % | → |
| 8701229000 | Used | 10.00 % | → |
| 8701231000 | New | 10.00 % | → |
| 8701239000 | Used | 10.00 % | → |
| 8701241000 | New | 10.00 % | → |
| 8701249000 | Used | 10.00 % | → |
| 8701290000 | Other | 10.00 % | → |
| 8701300000 | Track-laying tractors | 0.00 % | → |
| 8701911000 | Agricultural tractors and forestry tractors, wheeled | 0.00 % | → |
| 8701919000 | Other | 6.00 % | → |
| 8701921000 | Agricultural tractors and forestry tractors, wheeled | 0.00 % | → |
| 8701929000 | Other | 6.00 % | → |
| 8701931000 | Agricultural tractors and forestry tractors, wheeled | 0.00 % | → |
| 8701939000 | Other | 6.00 % | → |
| 8701941000 | Agricultural tractors and forestry tractors, wheeled | 0.00 % | → |
| 8701949000 | Other | 6.00 % | → |
| 8701951000 | Agricultural tractors and forestry tractors, wheeled | 0.00 % | → |
| 8701959000 | Other | 6.00 % | → |
| 8702101100 | New | 16.00 % | → |
| 8702101900 | Used | 16.00 % | → |
| 8702109100 | New | 10.00 % | → |
| 8702109900 | Used | 10.00 % | → |
| 8702201000 | Of a cylinder capacity exceeding 2 500 cm<sup>3</sup> | 16.00 % | → |
| 8702209000 | Of a cylinder capacity not exceeding 2 500 cm<sup>3</sup> | 10.00 % | → |
| 8702301000 | Of a cylinder capacity exceeding 2 800 cm<sup>3</sup> | 16.00 % | → |
| 8702309000 | Of a cylinder capacity not exceeding 2 800 cm<sup>3</sup> | 10.00 % | → |
| 8702400000 | With only electric motor for propulsion | 10.00 % | → |
| 8702901100 | New | 16.00 % | → |
| 8702901900 | Used | 16.00 % | → |
| 8702903100 | New | 10.00 % | → |
| 8702903900 | Used | 10.00 % | → |
| 8702909000 | With other engines | 10.00 % | → |
| 8703101100 | Vehicles specially designed for travelling on snow, with compression-ignition internal combustion piston engine (diesel or semi-diesel), or with spark-ignition internal combustion piston engine | 4.00 % | → |
| 8703101800 | Other | 10.00 % | → |
| 8703211000 | New | 10.00 % | → |
| 8703219000 | Used | 10.00 % | → |
| 8703221000 | New | 10.00 % | → |
| 8703229000 | Used | 10.00 % | → |
| 8703231100 | Motor caravans | 10.00 % | → |
| 8703231900 | Other | 10.00 % | → |
| 8703239000 | Used | 10.00 % | → |
| 8703241000 | New | 10.00 % | → |
| 8703249000 | Used | 10.00 % | → |
| 8703311000 | New | 10.00 % | → |
| 8703319000 | Used | 10.00 % | → |
| 8703321100 | Motor caravans | 10.00 % | → |
| 8703321900 | Other | 10.00 % | → |
| 8703329000 | Used | 10.00 % | → |
| 8703331100 | Motor caravans | 10.00 % | → |
| 8703331900 | Other | 10.00 % | → |
| 8703339000 | Used | 10.00 % | → |
| 8703401010 | Of a cylinder capacity not exceeding 1 000 cm<sup>3</sup> | 10.00 % | → |
| 8703401090 | Other | 10.00 % | → |
| 8703409010 | Of a cylinder capacity not exceeding 1 000 cm<sup>3</sup> | 10.00 % | → |
| 8703409090 | Other | 10.00 % | → |
| 8703500000 | Other vehicles, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion, other than those capable of being charged by plugging to external source of electric power | 10.00 % | → |
| 8703601010 | Of a cylinder capacity not exceeding 1 000 cm<sup>3</sup> | 10.00 % | → |
| 8703601090 | Other | 10.00 % | → |
| 8703609010 | Of a cylinder capacity not exceeding 1 000 cm<sup>3</sup> | 10.00 % | → |
| 8703609090 | Other | 10.00 % | → |
| 8703700000 | Other vehicles, with both compression-ignition internal combustion piston engine (diesel or semi-diesel) and electric motor as motors for propulsion, capable of being charged by plugging to external source of electric power | 10.00 % | → |
| 8703801010 | New battery electric vehicles, principally designed for the transport of nine or less persons, including the driver, excluding l category vehicles according to regulation (eu) no 168/2013 and motorcycles, propelled (regardless of the number of wheels set in motion) solely by one or more electric motors, including those with an internal combustion range extender (an auxiliary power unit) | 10.00 % | → |
| 8703801090 | Other | 10.00 % | → |
| 8703809000 | Used | 10.00 % | → |
| 8703900000 | Other | 10.00 % | → |
| 8704101000 | With compression-ignition internal combustion piston engine (diesel or semi-diesel), or with spark-ignition internal combustion piston engine | 0.00 % | → |
| 8704109000 | Other | 0.00 % | → |
| 8704211000 | Specially designed for the transport of highly radioactive materials | 2.00 % | → |
| 8704213100 | New | 10.00 % | → |
| 8704213900 | Used | 10.00 % | → |
| 8704219100 | New | 10.00 % | → |
| 8704219900 | Used | 10.00 % | → |
| 8704221000 | Specially designed for the transport of highly radioactive materials | 2.00 % | → |
| 8704229100 | New | 10.00 % | → |
| 8704229900 | Used | 10.00 % | → |
| 8704231000 | Specially designed for the transport of highly radioactive materials | 2.00 % | → |
| 8704239100 | New | 10.00 % | → |
| 8704239900 | Used | 10.00 % | → |
| 8704311000 | Specially designed for the transport of highly radioactive materials | 2.00 % | → |
| 8704313100 | New | 10.00 % | → |
| 8704313900 | Used | 10.00 % | → |
| 8704319100 | New | 10.00 % | → |
| 8704319900 | Used | 10.00 % | → |
| 8704321000 | Specially designed for the transport of highly radioactive materials | 2.00 % | → |
| 8704329100 | New | 10.00 % | → |
| 8704329900 | Used | 10.00 % | → |
| 8704411000 | Specially designed for the transport of highly radioactive materials | 2.00 % | → |
| 8704413100 | New | 10.00 % | → |
| 8704413900 | Used | 10.00 % | → |
| 8704419100 | New | 10.00 % | → |
| 8704419900 | Used | 10.00 % | → |
| 8704421000 | Specially designed for the transport of highly radioactive materials | 2.00 % | → |
| 8704429100 | New | 10.00 % | → |
| 8704429900 | Used | 10.00 % | → |
| 8704431000 | Specially designed for the transport of highly radioactive materials | 2.00 % | → |
| 8704439100 | New | 10.00 % | → |
| 8704439900 | Used | 10.00 % | → |
| 8704511000 | Specially designed for the transport of highly radioactive materials | 2.00 % | → |
| 8704513100 | New | 10.00 % | → |
| 8704513900 | Used | 10.00 % | → |
| 8704519100 | New | 10.00 % | → |
| 8704519900 | Used | 10.00 % | → |
| 8704521000 | Specially designed for the transport of highly radioactive materials | 2.00 % | → |
| 8704529100 | New | 10.00 % | → |
| 8704529900 | Used | 10.00 % | → |
| 8704600000 | Other with only electric motor for propulsion | 10.00 % | → |
| 8704900000 | Other | 10.00 % | → |
| 8705100011 | New mobile cranes, meaning cable-controlled or hydraulic-powered cranes, designed for the lifting, lowering and horizontal movement of materials on land, with a lifting capacity of at least 30 tonnes, mounted on self-propelled vehicles, regardless of their propulsion systemmobile cranes | 0.00 % | → |
| 8705100090 | Other | 0.00 % | → |
| 8705200000 | Mobile drilling derricks | 0.00 % | → |
| 8705300000 | Fire fighting vehicles | 0.00 % | → |
| 8705400000 | Concrete-mixer lorries | 0.00 % | → |
| 8705903000 | Concrete-pumping vehicles | 0.00 % | → |
| 8705908000 | Other | 0.00 % | → |
| 8706001100 | For vehicles of heading 8702 or 8704 | 18.00 % | → |
| 8706001900 | Other | 6.00 % | → |
| 8706009100 | For vehicles of heading 8703 | 4.00 % | → |
| 8706009900 | Other | 10.00 % | → |
| 8707101000 | For industrial assembly purposes | 4.00 % | → |
| 8707109000 | Other | 4.00 % | → |
| 8707901000 | For the industrial assembly of:<br>pedestrian-controlled tractors of subheading 8701 10;<br>vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm<sup>3</sup> or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm<sup>3</sup>;<br>special purpose motor vehicles of heading 8705 | 4.00 % | → |
| 8707909000 | Other | 4.00 % | → |
| 8708101010 | Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of chapter 87 | 20.00 % | → |
| 8708101090 | Other | 20.00 % | → |
| 8708109010 | Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of chapter 87 | 4.00 % | → |
| 8708109090 | Other | 4.00 % | → |
| 8708211000 | For the industrial assembly of:<br>vehicles of heading 8703;<br>vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm<sup>3</sup> or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm<sup>3</sup>;<br>vehicles of heading 8705 | 20.00 % | → |
| 8708219000 | Other | 4.00 % | → |
| 8708221000 | For the industrial assembly of:<br>pedestrian-controlled tractors of subheading 8701 10;<br>vehicles of heading 8703;<br>vehicles of heading 8704 with either a compression-ignition internal combustion piston engine (diesel or semi-diesel) of a cylinder capacity not exceeding 2 500 cm<sup>3</sup> or with a spark-ignition internal combustion piston engine of a cylinder capacity not exceeding 2 800 cm<sup>3</sup>;<br>vehicles of heading 8705 | 20.00 % | → |
| 8708229000 | Other | 4.00 % | → |
| 8708291011 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 20.00 % | → |
| 8708291099 | Other | 20.00 % | → |
| 8708299011 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 4.00 % | → |
| 8708299099 | Other | 4.00 % | → |
| 8708301040 | Body of disc type brake in bir ("ball in ramp") or epb ("electronic parking brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of chapter 87 | 20.00 % | → |
| 8708301070 | Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of chapter 87 | 20.00 % | → |
| 8708301090 | Other | 2.00 % | → |
| 8708309130 | Body of disc type brake in bir ("ball in ramp") or epb ("electronic parking brake") or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of chapter 87 | 4.00 % | → |
| 8708309140 | Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of chapter 87 | 4.00 % | → |
| 8708309190 | Other | 4.00 % | → |
| 8708309900 | Other | 4.00 % | → |
| 8708402020 | Automatic hydrodynamic gearbox<br>- with a hydraulic torque converter,<br>- without transfer box and cardan shaft,<br>- whether or not with front differential,<br>for use in the manufacture of motor vehicles of chapter 87<br> | 20.00 % | → |
| 8708402025 | Transmission assembly consisting of:<br>-double pinion type planetary gear shifting mechanism,<br>-sport sequential shiftmatic system with a speed of 7 or more but not more than 10,<br>-a width of 280 mm or more but no more than 470 mm,<br>-a height of 350 mm or more but no more than 595 mm,<br>-a length of 410 mm or more but no more than 690 mm,<br>-a weight of 70 kg or more but no more than 110 kg,<br>for use in the manufacture of motor vehicles of subheading 8703 22 and 8703 23 | 20.00 % | → |
| 8708402070 | Manual gearbox in cast aluminium housing for transverse installation with:<br>- maximum dimensions of 550 x 500 x 600mm<br>-five or six gears,<br>-a differential gear,<br>-an engine torque of 400 nm or less,<br>for use in the manufacture of motor vehicles of heading 8703 | 0.00 % | → |
| 8708402080 | Transmission gearbox without torque converter, with:<br>- dual clutch,<br>- 7 or more forward gears,<br>- 1 reverse gear,<br>- a maximum torque of 450nm,<br>- whether or not with electric motor integrated,<br>- a height of 350mm or more but not more than 600mm,<br>- a width 350mm or more but not more than 600mm, and<br>- a weight of 70kg or more but not more than 110kg,<br>for use in the manufacture of motor vehicles of heading 8703<br> | 0.00 % | → |
| 8708402090 | Other | 20.00 % | → |
| 8708405010 | Automatic hydrodynamic gearbox<br>- with a hydraulic torque converter,<br>- without transfer box and cardan shaft,<br>- whether or not with front differential,<br>for use in the manufacture of motor vehicles of chapter 87<br> | 4.00 % | → |
| 8708405025 | Transmission assembly housing 3 other shafts inside it and offering a rotating switch for shift position, consisting of:<br>-cast aluminium body,<br>-differential gear,<br>-2 electrical motors and gears,<br>-a width of 280 mm or more but no more than 470 mm,<br>-a height of 350 mm or more but no more than 595 mm,<br>-a length of 410 mm or more but no more than 690 mm,<br>for use in the manufacture of motor vehicles of subheadings 8703 40 and 8703 60 | 4.00 % | → |
| 8708405060 | Manual gearbox in cast aluminium housing for transverse installation with:<br>- maximum dimensions of 550 x 500 x 600mm<br>-five or six gears,<br>-a differential gear,<br>-an engine torque of 400 nm or less,<br>for use in the manufacture of motor vehicles of heading 8703 | 4.00 % | → |
| 8708405070 | Automatic transmission equipped with double clutch system with:<br>-at least 8 gears,<br>-an engine torque of 800 nm or more,<br>-an electronic differential,<br>-a p-lock safety system, and<br>-a tcu transmission control unit,<br>for use in the manufacture of motor vehicles of heading 8703 | 4.00 % | → |
| 8708405090 | Other | 4.00 % | → |
| 8708409100 | Of closed-die forged steel | 4.00 % | → |
| 8708409900 | Other | 2.00 % | → |
| 8708502015 | Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened | 20.00 % | → |
| 8708502018 | Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of:<br>-two cardan rods,<br>-central universal joint,<br>-central bearing with suspension in a plastic cover,<br>-universal joints on both ends of the shaft,<br>-slip, tube and end yokes,<br>-of a length of 1,4 m or more but not more than 2,4 m,<br>for use in the production of goods of chapter 87 | 20.00 % | → |
| 8708502020 | Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle<br>- of a length of 1 m or more but not more than 2 m,<br>- of a weight of 6 kg or more but not more than 9 kg<br> | 20.00 % | → |
| 8708502025 | Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:<br>-6 ball tracks or more but not more than 8, with<br>-a thread,<br>-an external involute spline with 21 or more but not more than 38 teeth,<br>-for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,<br>-forged, turned, milled and hardened<br> | 20.00 % | → |
| 8708502035 | Inboard constant velocity joint tripod housing, with:<br>-an outer diameter of 67,0 mm or more but not more than 99,0 mm,<br>-3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,<br>-an external spline with 21 teeth or more but not more than 41,<br>-forged, turned, rolled and hardened<br> | 20.00 % | → |
| 8708502050 | Double flange bearing of 3rd generation, for motor vehicles,<br>- with double-row ball bearing,<br>- whether or not with impulse (encoder) ring,<br>- whether or not with antilock brake system (abs) sensor,<br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87 | 20.00 % | → |
| 8708502055 | Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:<br>-3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,<br>-forged, turned, broached and hardened<br> | 20.00 % | → |
| 8708502070 | Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:<br>-an outer diameter of 67,0 mm or more but not more than 84,5 mm,<br>-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,<br>- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,<br>-spline with 21 teeth or more but not more than 35,<br>-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves<br> | 20.00 % | → |
| 8708502075 | Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:<br>- an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm,<br>- an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44,<br>- a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and<br>- with a grease compartment,<br>- capable of working at constant speed at variable articulation angle not higher than 52 degrees<br> | 20.00 % | → |
| 8708502080 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 20.00 % | → |
| 8708502090 | Other | 2.00 % | → |
| 8708503511 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 4.00 % | → |
| 8708503590 | Other | 4.00 % | → |
| 8708505511 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 4.00 % | → |
| 8708505520 | Double flange bearing of 3rd generation, for motor vehicles,<br>- with double-row ball bearing,<br>- whether or not with impulse (encoder) ring,<br>- whether or not with antilock brake system (abs) sensor,<br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87 | 4.00 % | → |
| 8708505550 | Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened | 4.00 % | → |
| 8708505591 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 4.00 % | → |
| 8708505599 | Other | 4.00 % | → |
| 8708509110 | Double flange bearing of 3rd generation, for motor vehicles,<br>- with double-row ball bearing,<br>- whether or not with impulse (encoder) ring,<br>- whether or not with antilock brake system (abs) sensor,<br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87 | 4.00 % | → |
| 8708509111 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 4.00 % | → |
| 8708509190 | Other | 4.00 % | → |
| 8708509910 | Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle<br>- of a length of 1 m or more but not more than 2 m,<br>- of a weight of 6 kg or more but not more than 9 kg<br> | 2.00 % | → |
| 8708509925 | Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:<br>-an outer diameter of 67,0 mm or more but not more than 84,5 mm,<br>-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,<br>- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,<br>-spline with 21 teeth or more but not more than 35,<br>-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves<br> | 2.00 % | → |
| 8708509935 | Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:<br>- an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm,<br>- an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44,<br>- a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and<br>- with a grease compartment,<br>- capable of working at constant speed at variable articulation angle not higher than 52 degrees<br> | 2.00 % | → |
| 8708509940 | Double flange bearing of 3rd generation, for motor vehicles,<br>- with double-row ball bearing,<br>- whether or not with impulse (encoder) ring,<br>- whether or not with antilock brake system (abs) sensor,<br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87 | 2.00 % | → |
| 8708509945 | Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:<br>-6 ball tracks or more but not more than 8, with<br>-a thread,<br>-an external involute spline with 21 or more but not more than 38 teeth,<br>-for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,<br>-forged, turned, milled and hardened<br> | 2.00 % | → |
| 8708509950 | Inboard constant velocity joint tripod housing, with:<br>-an outer diameter of 67,0 mm or more but not more than 99,0 mm,<br>-3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,<br>-an external spline with 21 teeth or more but not more than 41,<br>-forged, turned, rolled and hardened<br> | 2.00 % | → |
| 8708509960 | Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:<br>-3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,<br>-forged, turned, broached and hardened<br> | 2.00 % | → |
| 8708509970 | Specific pre-assembled or ready-to assemble sections for new mobile cranes | 2.00 % | → |
| 8708509990 | Other | 2.00 % | → |
| 8708701015 | Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 | 20.00 % | → |
| 8708701050 | Other | 20.00 % | → |
| 8708701080 | Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 | 20.00 % | → |
| 8708701085 | Other | 20.00 % | → |
| 8708701092 | Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 | 20.00 % | → |
| 8708701095 | Other | 20.00 % | → |
| 8708705015 | Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 | 4.00 % | → |
| 8708705050 | Other | 4.00 % | → |
| 8708705080 | Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 | 4.00 % | → |
| 8708705085 | Other | 4.00 % | → |
| 8708709115 | Fitted with pneumatic tyres, new or retreaded, of rubber, of a kind used for buses or lorries, with a load index exceeding 121 | 2.00 % | → |
| 8708709190 | Other | 2.00 % | → |
| 8708709920 | Road wheels of steel, whether or not with their accessories | 4.00 % | → |