HS 编码	商品描述	首要税率
8708502015	Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened	—
8708502018	Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of:<br>-two cardan rods,<br>-central universal joint,<br>-central bearing with suspension in a plastic cover,<br>-universal joints on both ends of the shaft,<br>-slip, tube and end yokes,<br>-of a length of 1,4 m or more but not more than 2,4 m,<br>for use in the production of goods of chapter 87	—
8708502020	Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle<br>- of a length of 1 m or more but not more than 2 m,<br>- of a weight of 6 kg or more but not more than 9 kg<br>	—
8708502025	Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:<br>-6 ball tracks or more but not more than 8, with<br>-a thread,<br>-an external involute spline with 21 or more but not more than 38 teeth,<br>-for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,<br>-forged, turned, milled and hardened<br>	—
8708502035	Inboard constant velocity joint tripod housing, with:<br>-an outer diameter of 67,0 mm or more but not more than 99,0 mm,<br>-3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,<br>-an external spline with 21 teeth or more but not more than 41,<br>-forged, turned, rolled and hardened<br>	—
8708502050	Double flange bearing of 3rd generation, for motor vehicles,<br>- with double-row ball bearing,<br>- whether or not with impulse (encoder) ring,<br>- whether or not with antilock brake system (abs) sensor,<br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87	—
8708502055	Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:<br>-3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,<br>-forged, turned, broached and hardened<br>	—
8708502070	Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:<br>-an outer diameter of 67,0 mm or more but not more than 84,5 mm,<br>-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,<br>- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,<br>-spline with 21 teeth or more but not more than 35,<br>-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves<br>	—
8708502075	Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:<br>- an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm,<br>- an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44,<br>- a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and<br>- with a grease compartment,<br>- capable of working at constant speed at variable articulation angle not higher than 52 degrees<br>	—
8708502080	Specific pre-assembled or ready-to assemble sections for new mobile cranes	—
8708502090	Other	2.00 %
8708503511	Specific pre-assembled or ready-to assemble sections for new mobile cranes	4.00 %
8708503590	Other	4.00 %
8708505511	Specific pre-assembled or ready-to assemble sections for new mobile cranes	4.00 %
8708505520	Double flange bearing of 3rd generation, for motor vehicles,<br>- with double-row ball bearing,<br>- whether or not with impulse (encoder) ring,<br>- whether or not with antilock brake system (abs) sensor,<br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87	4.00 %
8708505550	Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened	4.00 %
8708505591	Specific pre-assembled or ready-to assemble sections for new mobile cranes	4.00 %
8708505599	Other	4.00 %
8708509110	Double flange bearing of 3rd generation, for motor vehicles,<br>- with double-row ball bearing,<br>- whether or not with impulse (encoder) ring,<br>- whether or not with antilock brake system (abs) sensor,<br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87	4.00 %
8708509111	Specific pre-assembled or ready-to assemble sections for new mobile cranes	4.00 %
8708509190	Other	4.00 %
8708509910	Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle<br>- of a length of 1 m or more but not more than 2 m,<br>- of a weight of 6 kg or more but not more than 9 kg<br>	2.00 %
8708509925	Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:<br>-an outer diameter of 67,0 mm or more but not more than 84,5 mm,<br>-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,<br>- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,<br>-spline with 21 teeth or more but not more than 35,<br>-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves<br>	2.00 %
8708509935	Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:<br>- an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm,<br>- an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44,<br>- a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and<br>- with a grease compartment,<br>- capable of working at constant speed at variable articulation angle not higher than 52 degrees<br>	2.00 %
8708509940	Double flange bearing of 3rd generation, for motor vehicles,<br>- with double-row ball bearing,<br>- whether or not with impulse (encoder) ring,<br>- whether or not with antilock brake system (abs) sensor,<br>- whether or not with mounted screws,<br>for use in the manufacture of goods of chapter 87	2.00 %
8708509945	Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:<br>-6 ball tracks or more but not more than 8, with<br>-a thread,<br>-an external involute spline with 21 or more but not more than 38 teeth,<br>-for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,<br>-forged, turned, milled and hardened<br>	2.00 %
8708509950	Inboard constant velocity joint tripod housing, with:<br>-an outer diameter of 67,0 mm or more but not more than 99,0 mm,<br>-3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,<br>-an external spline with 21 teeth or more but not more than 41,<br>-forged, turned, rolled and hardened<br>	2.00 %
8708509960	Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:<br>-3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,<br>-forged, turned, broached and hardened<br>	2.00 %
8708509970	Specific pre-assembled or ready-to assemble sections for new mobile cranes	2.00 %
8708509990	Other	2.00 %

12 国进口税率对照

英国 具体税号

英国具体税号