美国 · 第 73· 200 条目

§73钢铁制品

第 XV 类贱金属及其制品 · 第 72–83 章（WCO HS）

本章品目（4 位 WCO 统一）

25 个品目

7301钢铁板桩；焊接型钢→7302钢铁制铁路或电车道铺轨材料及附件→7303铸铁制管材及空心型材→7304钢铁制(铸铁除外)无缝管材及空心型材→7305钢铁制外径超406.4毫米圆形管材→7306钢铁制其他管材及空心型材→7307钢铁制管件→7309钢铁制容积超300升非气态物料储罐→7310钢铁制容积不超300升非气态物料容器→7311钢铁制压缩或液化气体容器→7312钢铁制非电绝缘绞股线、绳、缆及类似品→7313钢铁刺线及栅栏用扭绞线→7314钢铁丝布、格栅、网、栅栏及扩张网→7315钢铁链及其零件→7316钢铁锚、抓锚及其零件→7317钢铁钉、大头钉、图钉、瓦楞钉、U形钉及类似品→7318钢铁螺钉、螺栓、螺母、铆钉、垫圈及类似品→7319钢铁缝纫针、编织针、钩针、安全别针及其他针→7320钢铁弹簧及其弹簧片→7321钢铁非电家用炉灶、烤架及类似器具及其零件→7322钢铁非电中央供暖散热器、空气加热器及其零件→7323钢铁餐具、厨房用具、家用器具、钢丝绒及擦洗用品→7324钢铁卫生器具及其零件→7325其他钢铁铸造制品→7326其他钢铁制品→

美国 税号（前 200 条）

本章共 677 条，继续浏览请点进上方品目
HS 编码商品描述首要税率
73011000Sheet pilingFree→
73012010Of iron or nonalloy steelFree→
73012050Of alloy steelFree→
7302.10.10Of iron or nonalloy steelFree→
7302.10.10.10Standard tee rails over 30 kg per meterFree→
7302.10.10.15Over 30 kg per meterFree→
7302.10.10.25OtherFree→
7302.10.10.35Standard tee rails over 30 kg per meterFree→
7302.10.10.45Over 30 kg per meterFree→
7302.10.10.55OtherFree→
7302.10.10.65Railway rails for rerollingFree→
7302.10.10.75OtherFree→
7302.10.50Of alloy steelFree→
7302.10.50.20NewFree→
7302.10.50.40Railway rails for rerollingFree→
7302.10.50.60OtherFree→
73023000Switch blades, crossing frogs, point rods and other crossing piecesFree→
73024000Fish-plates and sole platesFree→
73029010Sleepers (cross-ties)Free→
73029090OtherFree→
7303.00.00Tubes, pipes and hollow profiles, of cast ironFree→
7303.00.00.30Soil pipeFree→
7303.00.00.60Pressure pipe with an inside diameter of less than 356 mmFree→
7303.00.00.90OtherFree→
7304.11.00Of stainless steelFree→
7304.11.00.20Having an outside diameter not exceeding 114.3 mmFree→
7304.11.00.50Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mmFree→
7304.11.00.80Having an outside diameter exceeding 406.4 mmFree→
7304.19.10Of iron or nonalloy steelFree→
7304.19.10.20Having an outside diameter not exceeding 114.3 mmFree→
7304.19.10.30Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFree→
7304.19.10.45Having a wall thickness less than 12.7 mmFree→
7304.19.10.60Having a wall thickness of 12.7 mm or moreFree→
7304.19.10.80Having an outside diameter exceeding 406.4 mmFree→
7304.19.50Of other alloy steelFree→
7304.19.50.20Having an outside diameter not exceeding 114.3 mmFree→
7304.19.50.50Having an outside diameter exceeding 114.3 mm but not exceeding 406.4 mmFree→
7304.19.50.80Having an outside diameter exceeding 406.4 mmFree→
7304.22.00Drill pipe of stainless steelFree→
7304.22.00.30Having a wall thickness not exceeding 9.5 mmFree→
7304.22.00.45Having a wall thickness exceeding 9.5 mmFree→
7304.22.00.60Having an outside diameter exceeding 168.3 mmFree→
73042330Of iron or nonalloy steelFree→
7304.23.60Of alloy steelFree→
7304.23.60.30Having a wall thickness not exceeding 9.5 mmFree→
7304.23.60.45Having a wall thickness exceeding 9.5 mmFree→
7304.23.60.60Having an outside diameter exceeding 168.3 mmFree→
7304.24.30Threaded or coupledFree→
7304.24.30.10Having a wall thickness less than 12.7 mmFree→
7304.24.30.20Having a wall thickness of 12.7 mm or moreFree→
7304.24.30.30Having a wall thickness less than 12.7 mmFree→
7304.24.30.40Having a wall thickness of 12.7 mm or moreFree→
7304.24.30.45Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mmFree→
7304.24.30.80Having an outside diameter exceeding 406.4 mmFree→
7304.24.40OtherFree→
7304.24.40.10Having a wall thickness less than 12.7 mmFree→
7304.24.40.20Having a wall thickness of 12.7 mm or moreFree→
7304.24.40.30Having a wall thickness less than 12.7 mmFree→
7304.24.40.40Having a wall thickness of 12.7 mm or moreFree→
7304.24.40.50Having a wall thickness less than 12.7 mmFree→
7304.24.40.60Having a wall thickness of 12.7 mm or moreFree→
7304.24.40.80Having an outside diameter exceeding 406.4 mmFree→
7304.24.60TubingFree→
7304.24.60.15Having a wall thickness not exceeding 9.5 mmFree→
7304.24.60.30Having a wall thickness exceeding 9.5 mmFree→
7304.24.60.45Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFree→
7304.24.60.60Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmFree→
7304.24.60.75Having an outside diameter exceeding 406.4 mmFree→
7304.29.10Threaded or coupledFree→
7304.29.10.10Having a wall thickness less than 12.7 mmFree→
7304.29.10.20Having a wall thickness of 12.7 mm or moreFree→
7304.29.10.30Having a wall thickness less than 12.7 mmFree→
7304.29.10.40Having a wall thickness of 12.7 mm or moreFree→
7304.29.10.50Having a wall thickness less than 12.7 mmFree→
7304.29.10.60Having a wall thickness of 12.7 mm or moreFree→
7304.29.10.80Having an outside diameter exceeding 406.4 mmFree→
7304.29.20OtherFree→
7304.29.20.10Having a wall thickness less than 12.7 mmFree→
7304.29.20.20Having a wall thickness of 12.7 mm or moreFree→
7304.29.20.30Having a wall thickness less than 12.7 mmFree→
7304.29.20.40Having a wall thickness of 12.7 mm or moreFree→
7304.29.20.50Having a wall thickness less than 12.7 mmFree→
7304.29.20.60Having a wall thickness of 12.7 mm or moreFree→
7304.29.20.80Having an outside diameter exceeding 406.4 mmFree→
7304.29.31Threaded or coupledFree→
7304.29.31.10Having a wall thickness less than 12.7 mmFree→
7304.29.31.20Having a wall thickness of 12.7 mm or moreFree→
7304.29.31.30Having a wall thickness less than 12.7 mmFree→
7304.29.31.40Having a wall thickness of 12.7 mm or moreFree→
7304.29.31.50Having a wall thickness less than 12.7 mmFree→
7304.29.31.60Having a wall thickness of 12.7 mm or moreFree→
7304.29.31.80Having an outside diameter exceeding 406.4 mmFree→
7304.29.41OtherFree→
7304.29.41.10Having a wall thickness less than 12.7 mmFree→
7304.29.41.20Having a wall thickness of 12.7 mm or moreFree→
7304.29.41.30Having a wall thickness less than 12.7 mmFree→
7304.29.41.40Having a wall thickness of 12.7 mm or moreFree→
7304.29.41.50Having a wall thickness less than 12.7 mmFree→
7304.29.41.60Having a wall thickness of 12.7 mm or moreFree→
7304.29.41.80Having an outside diameter exceeding 406.4 mmFree→
7304.29.50Of iron or nonalloy steelFree→
7304.29.50.15Having a wall thickness not exceeding 9.5 mmFree→
7304.29.50.30Having a wall thickness exceeding 9.5 mmFree→
7304.29.50.45Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFree→
7304.29.50.60Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmFree→
7304.29.50.75Having an outside diameter exceeding 406.4 mmFree→
7304.29.61Of other alloy steelFree→
7304.29.61.15Having a wall thickness not exceeding 9.5 mmFree→
7304.29.61.30Having a wall thickness exceeding 9.5 mmFree→
7304.29.61.45Having an outside diameter exceeding 114.3 mm but less than 215.9 mmFree→
7304.29.61.60Having an outside diameter of 215.9 mm or more but not exceeding 406.4 mmFree→
7304.29.61.75Having an outside diameter exceeding 406.4 mmFree→
73043130Hollow barsFree→
7304.31.60OtherFree→
7304.31.60.10Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFree→
7304.31.60.50OtherFree→
7304.39.00OtherFree→
7304.39.00.02Having an outside diameter less than 38.1 mmFree→
7304.39.00.04Having an outside diameter of 38.1 mm or more but less than 190.5 mmFree→
7304.39.00.06Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mmFree→
7304.39.00.08Having an outside diameter exceeding 285.8 mmFree→
7304.39.00.16Galvanized, having an outside diameter not exceeding 114.3 mmFree→
7304.39.00.20Having an outside diameter less than 38.1 mmFree→
7304.39.00.24Having a wall thickness less than 6.4 mmFree→
7304.39.00.28Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mmFree→
7304.39.00.32Having a wall thickness exceeding 12.7 mmFree→
7304.39.00.36Having a wall thickness less than 12.7 mmFree→
7304.39.00.40Having a wall thickness of 12.7 mm or more but less than 19 mmFree→
7304.39.00.44Having a wall thickness of 19 mm or moreFree→
7304.39.00.48Having a wall thickness less than 12.7 mmFree→
7304.39.00.52Having a wall thickness of 12.7 mm or more but less than 19 mmFree→
7304.39.00.56Having a wall thickness of 19 mm or moreFree→
7304.39.00.62Having a wall thickness less than 12.7 mmFree→
7304.39.00.68Having a wall thickness of 12.7 mm or more but less than 19 mmFree→
7304.39.00.72Having a wall thickness of 19 mm or moreFree→
7304.39.00.76Having a wall thickness less than 19 mmFree→
7304.39.00.80Having a wall thickness of 19 mm or moreFree→
7304.41.30Of an external diameter of less than 19 mmFree→
7304.41.30.05Of high-nickel alloy steelFree→
7304.41.30.15Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFree→
7304.41.30.45OtherFree→
7304.41.60OtherFree→
7304.41.60.05Of high-nickel alloy steelFree→
7304.41.60.15Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFree→
7304.41.60.45OtherFree→
7304.49.00OtherFree→
7304.49.00.05Of high-nickel alloy steelFree→
7304.49.00.15Hollow barsFree→
7304.49.00.45Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFree→
7304.49.00.60OtherFree→
73045110Suitable for use in the manufacture of ball or roller bearingsFree→
7304.51.50OtherFree→
7304.51.50.05Of high-nickel alloy steelFree→
7304.51.50.15Of heat-resisting steelFree→
7304.51.50.45OtherFree→
7304.51.50.60OtherFree→
73045910Suitable for use in the manufacture of ball or roller bearingsFree→
7304.59.20Suitable for use in boilers, superheaters, heat exchangers, condensers, refining furnaces and feedwater heatersFree→
7304.59.20.30Of heat-resisting steelFree→
7304.59.20.40Having an outside diameter less than 38.1 mmFree→
7304.59.20.45Having an outside diameter of 38.1 mm or more but not exceeding 114.3 mmFree→
7304.59.20.55Having an outside diameter exceeding 114.3 mm but less than 190.5 mmFree→
7304.59.20.60Having an outside diameter of 190.5 mm or more but not exceeding 285.8 mmFree→
7304.59.20.70Having an outside diameter exceeding 285.8 mm but not exceeding 406.4 mmFree→
7304.59.20.80Having an outside diameter exceeding 406.4 mmFree→
73045960Of heat-resisting steelFree→
7304.59.80OtherFree→
7304.59.80.10Having an outside diameter less than 38.1 mmFree→
7304.59.80.15Having a wall thickness less than 6.4 mmFree→
7304.59.80.20Having a wall thickness of 6.4 mm or more but not exceeding 12.7 mmFree→
7304.59.80.25Having a wall thickness exceeding 12.7 mmFree→
7304.59.80.30Having a wall thickness less than 12.7 mmFree→
7304.59.80.35Having a wall thickness of 12.7 mm or more but less than 19 mmFree→
7304.59.80.40Having a wall thickness of 19 mm or moreFree→
7304.59.80.45Having a wall thickness less than 12.7 mmFree→
7304.59.80.50Having a wall thickness of 12.7 mm or more but less than 19 mmFree→
7304.59.80.55Having a wall thickness of 19 mm or moreFree→
7304.59.80.60Having a wall thickness less than 12.7 mmFree→
7304.59.80.65Having a wall thickness of 12.7 mm or more but less than 19 mmFree→
7304.59.80.70Having a wall thickness of 19 mm or moreFree→
7304.59.80.80Having an outside diameter exceeding 406.4 mmFree→
73049010Of iron or nonalloy steelFree→
73049030Of alloy steelFree→
73049050Of iron or nonalloy steelFree→
73049070Of alloy steelFree→
7305.11.10Of iron or nonalloy steelFree→
7305.11.10.30With an external diameter exceeding 406.4 mm but not exceeding 609.6 mmFree→
7305.11.10.60With an external diameter exceeding 609.6 mmFree→
73051150Of alloy steelFree→
7305.12.10Of iron or nonalloy steelFree→
7305.12.10.30With an external diameter exceeding 406.4 mm but not exceeding 609.6 mmFree→
7305.12.10.60With an external diameter exceeding 609.6 mmFree→
73051250Of alloy steelFree→
7305.19.10Of iron or nonalloy steelFree→
7305.19.10.30With an external diameter exceeding 406.4 mm but not exceeding 609.6 mmFree→
7305.19.10.60With an external diameter exceeding 609.6 mmFree→
73051950Of alloy steelFree→
73052020Threaded or coupledFree→
73052040OtherFree→
73052060Threaded or coupledFree→