Japan · Chapter 72· 200 entries
§72Iron and steel
Section XVBase metals and articles of base metal · Chapters 72–83（WCO HS）
Headings (4-digit WCO)
29 headings
7201Pig iron and spiegeleisen in pigs, blocks or other primary forms→7202Ferro-alloys→7203FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AND OTHER SPONGY FERROUS PRODUCTS, IN LUMPS, PELLETS OR SIMILAR FORMS; IRON HAVING MINIMUM PURITY BY WEIGHT OF 99.94%, IN LUMPS, PELLETS OR SIMILAR FORMS→7204Ferrous waste and scrap; remelting scrap ingots of iron or steel→7205Granules and powders, of pig iron, spiegeleisen, iron or steel→7206Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)→7207Semi-finished products of iron or non-alloy steel→7208Flat-rolled products of iron or non-alloy steel, of width of 600 mm or more, hot-rolled, not clad, a plated or coated→7209Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold reduced), not clad, plated or coated→7210Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated→7211Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated→7212Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated→7213Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel→7214Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling→7215Other bars and rods of iron or non-alloy steel→7216Angles, shapes and sections of iron or non-alloy steel→7217Wire of iron or non-alloy steel→7218Stainless steel in ingots or other primary forms; semifinished products of stainless steel→7219Flat-rolled products of stainless steel, of a width of 600 mm or more→7220Flat-rolled products of stainless steel, of a width of less than 600 mm→7221Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel→7222Other bars and rods of stainless steel; angles, shapes and sections of stainless steel→7223Wire of stainless steel→7224Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel→7225Flat-rolled products of other alloy steel, of a width of 600 mm or more→7226Flat-rolled products of other alloy steel, of a width of less than 600 mm→7227Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel→7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel→7229Wire of other alloy steel→
Japan tariff lines (top 200)
339 total in chapter — drill into a heading above for the rest| HS Code | Description | Primary rate | |
|---|---|---|---|
| 720110010 | - Containing less than 1.2 % by weight of silicon and not more than 0.04 % by weight of phosphorus | Free | → |
| 720110091 | -- Containing by weight less than 1.6 % of silicon | Free | → |
| 720110099 | -- Other | Free | → |
| 720120000 | Non-alloy pig iron containing by weight more than 0.5 % of phosphorus | Free | → |
| 720150000 | Alloy pig iron; spiegeleisen | Free | → |
| 720211000 | Containing by weight more than 2 % of carbon | 7.7% | → |
| 720219000 | Other | 7.7% | → |
| 720221000 | Containing by weight more than 55 % of silicon | Free | → |
| 720229000 | Other | 3% | → |
| 720230000 | Ferro-silico-manganese | 3% | → |
| 720241000 | Containing by weight more than 4 % of carbon | Free | → |
| 720249000 | Other | 7.2% | → |
| 720250000 | Ferro-silico-chromium | 3% | → |
| 720260010 | - Containing by weight less than 33 % of nickel | 5.9% | → |
| 720260090 | - Other | 5.9% | → |
| 720270000 | Ferro-molybdenum | 3.9% | → |
| 720280010 | 1 Ferro-tungsten | 2% | → |
| 720280020 | 2 Ferro-silico-tungsten | 3% | → |
| 720291000 | Ferro-titanium and ferro-silico-titanium | 3% | → |
| 720292000 | Ferro-vanadium | 3% | → |
| 720293000 | Ferro-niobium | Free | → |
| 720299010 | - Ferro-phosphorus | 3% | → |
| 720299090 | - Other | 3% | → |
| 720310000 | Ferrous products obtained by direct reduction of iron ore | Free | → |
| 720390000 | Other | Free | → |
| 720410000 | Waste and scrap of cast iron | Free | → |
| 720421000 | Of stainless steel | Free | → |
| 720429000 | Other | Free | → |
| 720430000 | Waste and scrap of tinned iron or steel | Free | → |
| 720441000 | Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | Free | → |
| 720449000 | Other | Free | → |
| 720450010 | 1 Of alloy steel | 5.7% | → |
| 720450020 | 2 Other | 4.1% | → |
| 720510000 | Granules | Free | → |
| 720521010 | - Containing not less than 1% but less than 5 % by weight of nickel | Free | → |
| 720521090 | - Other | Free | → |
| 720529000 | Other | Free | → |
| 720610010 | 1 Containing by weight less than 0.6 % of carbon | Free | → |
| 720610020 | 2 Other | 4.6% | → |
| 720690010 | 1 Containing by weight less than 0.6 % of carbon | Free | → |
| 720690020 | 2 Other | 4.6% | → |
| 720711000 | Of rectangular (including square) cross-section, the width measuring less than twice the thickness | Free | → |
| 720712000 | Other, of rectangular (other than square) cross-section | Free | → |
| 720719000 | Other | Free | → |
| 720720011 | - Billets | — | → |
| 720720012 | - Slabs | — | → |
| 720720019 | - Other | — | → |
| 720720020 | 2 Other | 4.6% | → |
| 720810010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720810021 | (1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 720810029 | (2)Other | 3.9% | → |
| 720825011 | - Of a thickness of less than 6 mm | — | → |
| 720825019 | - Other | — | → |
| 720825020 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720825030 | (2)Other | 3.9% | → |
| 720826011 | - High tensile steel of a tensile strength of 490 MPa or more | — | → |
| 720826019 | - Other | — | → |
| 720826021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720826029 | (2)Other | 3.9% | → |
| 720827011 | - High tensile steel of a tensile strength of 490 MPa or more | — | → |
| 720827019 | - Other | — | → |
| 720827021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720827029 | (2)Other | 3.9% | → |
| 720836010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | → |
| 720836021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720836029 | (2)Other | 3.9% | → |
| 720837011 | - Of a thickness of less than 6 mm | — | → |
| 720837019 | - Other | — | → |
| 720837020 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720837030 | (2)Other | 3.9% | → |
| 720838010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | → |
| 720838021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720838029 | (2)Other | 3.9% | → |
| 720839010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720839021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720839029 | (2)Other | 3.9% | → |
| 720840010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720840020 | (1)Of a thickness of less than of 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 720840030 | (2)Other | 3.9% | → |
| 720851011 | - Of a thickness of not exceeding 50 mm | — | → |
| 720851019 | - Of a thickness exceeding 50 mm | — | → |
| 720851021 | - Of a thickness of not exceeding 50 mm | — | → |
| 720851029 | - Of a thickness exceeding 50 mm | — | → |
| 720851030 | (2)Other | 3.9% | → |
| 720852011 | - Of a thickness of less than 6 mm | — | → |
| 720852019 | - Other | — | → |
| 720852020 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720852031 | - Of a thickness of less than 6 mm | — | → |
| 720852039 | - Other | — | → |
| 720853010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720853021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720853029 | (2)Other | 3.9% | → |
| 720854010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720854021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720854029 | (2)Other | 3.9% | → |
| 720890000 | Other | 3.9% | → |
| 720915010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720915021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720915029 | (2)Other | 3.9% | → |
| 720916011 | - High tensile steel of a tensile strength of 340 MPa or more | — | → |
| 720916019 | - Other | — | → |
| 720916021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720916029 | (2)Other | 3.9% | → |
| 720917011 | - High tensile steel of a tensile strength of 340 MPa or more | — | → |
| 720917019 | - Other | — | → |
| 720917021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720917029 | (2)Other | 3.9% | → |
| 720918010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720918021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720918029 | (2)Other | 3.9% | → |
| 720925010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720925021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 720925029 | (2)Other | 3.9% | → |
| 720926010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720926021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720926029 | (2)Other | 3.9% | → |
| 720927010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720927021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720927029 | (2)Other | 3.9% | → |
| 720928010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 720928021 | (1)Having a minimum yield point of 275 MPa | 4.6% | → |
| 720928029 | (2)Other | 3.9% | → |
| 720990000 | Other | 3.9% | → |
| 721011000 | Of a thickness of 0.5 mm or more | 3.9% | → |
| 721012000 | Of a thickness of less than 0.5 mm | 3.9% | → |
| 721020000 | Plated or coated with lead, including terne-plate | 3.9% | → |
| 721030010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | → |
| 721030021 | (1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 721030029 | (2)Other | 3.9% | → |
| 721041000 | Corrugated | 3.9% | → |
| 721049010 | - Hot-dip galvannealed, of plated or coated layers undergone a homogeneous alloying process (containing by weight of 7 % or more of iron in the entire layers) | 3.9% | → |
| 721049021 | -- Containing by weight 5.0 % or more but not more than 13.0 % of aluminium in the plated or coated layers and 2.0 % or more but not more than 4.0 % of magnesium in the plated or coated layers | 3.9% | → |
| 721049029 | -- Other | 3.9% | → |
| 721050010 | - Tinfree steel | 3.9% | → |
| 721050090 | - Other | 3.9% | → |
| 721061000 | Plated or coated with aluminium-zinc alloys | 3.9% | → |
| 721069000 | Other | 3.9% | → |
| 721070000 | Painted, varnished or coated with plastics | 3.9% | → |
| 721090010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721090020 | 2 Other | 4.6% | → |
| 721113010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721113021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 721113029 | (2)Other | 3.9% | → |
| 721114010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721114021 | (1)Having a minimum yield point of 355 MPa | 4.6% | → |
| 721114029 | (2)Other | 3.9% | → |
| 721119010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721119021 | (1)Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 721119029 | (2)Other | 3.9% | → |
| 721123000 | Containing by weight less than 0.25 % of carbon | 3.9% | → |
| 721129010 | 1 Of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 721129090 | 2 Other | 3.9% | → |
| 721190000 | Other | 3.9% | → |
| 721210000 | Plated or coated with tin | 3.9% | → |
| 721220010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721220021 | (1)Of steel of a thickness of less than 3 mm and having a minimum yield point of 275 MPa or of a thickness of 3 mm or more and having a minimum yield point of 355 MPa | 4.6% | → |
| 721220029 | (2)Other | 3.9% | → |
| 721230010 | - Containing by weight 5.0 % or more but not more than 13.0 % of aluminium in the plated or coated layers and 2.0 % or more but not more than 4.0 % of magnesium in the plated or coated layers | 3.9% | → |
| 721230090 | - Other | 3.9% | → |
| 721240000 | Painted, varnished or coated with plastics | 3.9% | → |
| 721250010 | - Tinfree steel | 3.9% | → |
| 721250090 | - Other | 3.9% | → |
| 721260010 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721260020 | 2 Other | 4.6% | → |
| 721310000 | Containing indentations, ribs, grooves or other deformations produced during the rolling process | 3.9% | → |
| 721320000 | Other, of free-cutting steel | 3.9% | → |
| 721391011 | -- Measuring less than 6 mm in diameter | — | → |
| 721391019 | -- Other | — | → |
| 721391020 | - Other | — | → |
| 721391090 | 2 Other | 4.6% | → |
| 721399020 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721399090 | 2 Other | 4.6% | → |
| 721410000 | Forged | 3.9% | → |
| 721420000 | Containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling | 3.9% | → |
| 721430000 | Other, of free-cutting steel | 3.9% | → |
| 721491020 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721491090 | 2 Other | 4.6% | → |
| 721499020 | 1 Containing by weight less than 0.6 % of carbon | 3.9% | → |
| 721499090 | 2 Other | 4.6% | → |
| 721510000 | Of free-cutting steel, not further worked than cold-formed or cold-finished | 3.9% | → |
| 721550010 | - Containing by weight less than 0.25 % of carbon | — | → |
| 721550019 | - Other | — | → |
| 721550090 | 2 Other | 4.6% | → |
| 721590010 | 1 Containing by weight less than 0.6% of carbon | 3.9% | → |
| 721590020 | 2 Other | 4.6% | → |
| 721610000 | U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm | 3.9% | → |
| 721621000 | L sections | 3.9% | → |
| 721622000 | T sections | 3.9% | → |
| 721631000 | U sections | 3.9% | → |
| 721632000 | I sections | 3.9% | → |
| 721633000 | H sections | 3.9% | → |
| 721640000 | L or T sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of 80 mm or more | 3.9% | → |
| 721650000 | Other angles, shapes and sections, not further worked than hot-rolled, hot-drawn or extruded | 3.9% | → |
| 721661000 | Obtained from flat-rolled products | 3.9% | → |
| 721669000 | Other | 3.9% | → |
| 721691000 | Cold-formed or cold-finished from flat-rolled products | 3.9% | → |
| 721699000 | Other | 3.9% | → |
| 721710010 | - Containing by weight less than 0.25 % of carbon | — | → |
| 721710019 | - Other | — | → |
| 721710090 | 2 Other | 4.6% | → |