Malaysia · Chapter 72· 200 entries
§72Iron and steel
Section XVBase metals and articles of base metal · Chapters 72–83（WCO HS）
Headings (4-digit WCO)
29 headings
7201Pig iron and spiegeleisen in pigs, blocks or other primary forms→7202Ferro-alloys→7203FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AND OTHER SPONGY FERROUS PRODUCTS, IN LUMPS, PELLETS OR SIMILAR FORMS; IRON HAVING MINIMUM PURITY BY WEIGHT OF 99.94%, IN LUMPS, PELLETS OR SIMILAR FORMS→7204Ferrous waste and scrap; remelting scrap ingots of iron or steel→7205Granules and powders, of pig iron, spiegeleisen, iron or steel→7206Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)→7207Semi-finished products of iron or non-alloy steel→7208Flat-rolled products of iron or non-alloy steel, of width of 600 mm or more, hot-rolled, not clad, a plated or coated→7209Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold reduced), not clad, plated or coated→7210Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated→7211Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated→7212Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated→7213Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel→7214Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling→7215Other bars and rods of iron or non-alloy steel→7216Angles, shapes and sections of iron or non-alloy steel→7217Wire of iron or non-alloy steel→7218Stainless steel in ingots or other primary forms; semifinished products of stainless steel→7219Flat-rolled products of stainless steel, of a width of 600 mm or more→7220Flat-rolled products of stainless steel, of a width of less than 600 mm→7221Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel→7222Other bars and rods of stainless steel; angles, shapes and sections of stainless steel→7223Wire of stainless steel→7224Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel→7225Flat-rolled products of other alloy steel, of a width of 600 mm or more→7226Flat-rolled products of other alloy steel, of a width of less than 600 mm→7227Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel→7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel→7229Wire of other alloy steel→
Malaysia tariff lines (top 200)
376 total in chapter — drill into a heading above for the rest| HS Code | Description | Primary rate | |
|---|---|---|---|
| 72011000 | - Non-alloy pig iron containing by weight 0.5 % or less of phosphorus | 0% | → |
| 72012000 | - Non-alloy pig iron containing by weight more than 0.5 % of phosphorus | 0% | → |
| 72015000 | - Alloy pig iron; spiegeleisen | 0% | → |
| 72021100 | - - Containing by weight more than 2 % of carbon | 0% | → |
| 72021900 | - - Other | 0% | → |
| 72022100 | - - Containing by weight more than 55 % of silicon | 0% | → |
| 72022900 | - - Other | 0% | → |
| 72023000 | - Ferro-silico-manganese | 0% | → |
| 72024100 | - - Containing by weight more than 4 % of carbon | 0% | → |
| 72024900 | - - Other | 0% | → |
| 72025000 | - Ferro-silico-chromium | 0% | → |
| 72026000 | - Ferro-nickel | 0% | → |
| 72027000 | - Ferro-molybdenum | 0% | → |
| 72028000 | - Ferro-tungsten and ferro-silico-tungsten | 0% | → |
| 72029100 | - - Ferro-titanium and ferro-silico-titanium | 0% | → |
| 72029200 | - - Ferro-vanadium | 0% | → |
| 72029300 | - - Ferro-niobium | 0% | → |
| 72029900 | - - Other | 0% | → |
| 72031000 | - Ferrous products obtained by direct reduction of iron ore | 0% | → |
| 72039000 | - Other | 0% | → |
| 72041000 | - Waste and scrap of cast iron | 0% | → |
| 72042100 | - - Of stainless steel | 0% | → |
| 72042900 | - - Other | 0% | → |
| 72043000 | - Waste and scrap of tinned iron or steel | 0% | → |
| 72044100 | - - Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles | 0% | → |
| 72044900 | - - Other | 0% | → |
| 72045000 | - Remelting scrap ingots | "5% and RM0.05" | → |
| 72051000 | - Granules | 0% | → |
| 72052100 | - - Of alloy steel | 0% | → |
| 72052900 | - - Other | 0% | → |
| 72061010 | - - Containing by weight more than 0.6 % of carbon | 5% | → |
| 72061090 | - - Other | 0% | → |
| 72069000 | - Other | 0% | → |
| 72071100 | - - Of rectangular (including square) cross-section, the width measuring less than twice the thickness | 0% | → |
| 72071210 | - - - Slabs | 0% | → |
| 72071290 | - - - Other | 0% | → |
| 72071900 | - - Other | 0% | → |
| 72072010 | - - - Slabs | 0% | → |
| 72072021 | - - - - Blocks roughly shaped by forging; sheet bars | 0% | → |
| 72072029 | - - - - Other | 0% | → |
| 72072091 | - - - Slabs | 5% | → |
| 72072092 | - - - - Blocks roughly shaped by forging; sheet bars | 5% | → |
| 72072099 | - - - - Other | 5% | → |
| 72081000 | - In coils, not further worked than hot-rolled, with patterns in relief | 15% | → |
| 72082500 | - - Of a thickness of 4.75 mm or more | 15% | → |
| 72082600 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 15% | → |
| 72082711 | - - - - Containing by weight 0.6 % or more of carbon | 15% | → |
| 72082791 | - - - - Containing by weight 0.6 % or more of carbon | 15% | → |
| 72082799 | - - - - Other | 15% | → |
| 72083600 | - - Of a thickness exceeding 10 mm | 15% | → |
| 72083700 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | 15% | → |
| 72083800 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 15% | → |
| 72083910 | - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | 15% | → |
| 72083920 | - - - Containing by weight less than 0.6 % of carbon and of a thickness more than 0.17 mm but not exceeding 1.5 mm | 15% | → |
| 72083930 | - - - Containing by weight 0.6 % or more of carbon and of a thickness not exceeding 1.5 mm | 15% | → |
| 72083940 | - - - Of a thickness more than 2 mm, maximum tensile strength of 550 Mpa and of a width not exceeding 1,250 mm | 15% | → |
| 72083990 | - - - Other | 15% | → |
| 72084000 | - Not in coils, not further worked than hot-rolled, with patterns in relief | 15% | → |
| 72085100 | - - Of a thickness exceeding 10 mm | 15% | → |
| 72085200 | - - Of a thickness of 4.75 mm or more but not exceeding 10 mm | 15% | → |
| 72085300 | - - Of a thickness of 3 mm or more but less than 4.75 mm | 15% | → |
| 72085410 | - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | 15% | → |
| 72085490 | - - - Other | 15% | → |
| 72089010 | - - Corrugated | 15% | → |
| 72089020 | - - Other, containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | 15% | → |
| 72089090 | - - Other | 15% | → |
| 72091500 | - - Of a thickness of 3 mm or more | 15% | → |
| 72091610 | - - - Of a width not exceeding 1,250 mm | 15% | → |
| 72091690 | - - - Other | 15% | → |
| 72091710 | - - - Of a width not exceeding 1,250 mm | 15% | → |
| 72091790 | - - - Other | 15% | → |
| 72091810 | - - - Tin-mill blackplate | 15% | → |
| 72091891 | - - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | 15% | → |
| 72091899 | - - - - Other | 15% | → |
| 72092500 | - - Of a thickness of 3 mm or more | 15% | → |
| 72092610 | - - - Of a width not exceeding 1,250 mm | 15% | → |
| 72092690 | - - - Other | 15% | → |
| 72092710 | - - - Of a width not exceeding 1,250 mm | 15% | → |
| 72092790 | - - - Other | 15% | → |
| 72092810 | - - - Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less | 15% | → |
| 72092890 | - - - Other | 15% | → |
| 72099010 | - - Corrugated | 15% | → |
| 72099090 | - - Other | 15% | → |
| 72101110 | - - - Containing by weight 0.6% or more of carbon | 15% | → |
| 72101190 | - - - Other | 5% | → |
| 72101210 | - - - Containing by weight 0.6 % or more of carbon | 15% | → |
| 72101290 | - - - Other | 5% | → |
| 72102010 | - - Containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less | 15% | → |
| 72102090 | - - Other | 15% | → |
| 72103011 | - - - Of a thickness not exceeding 1.2 mm | 15% | → |
| 72103012 | - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 15% | → |
| 72103019 | - - - Other | 15% | → |
| 72103091 | - - - Of a thickness not exceeding 1.2 mm | 15% | → |
| 72103099 | - - - Other | 15% | → |
| 72104111 | - - - - Of a thickness not exceeding 1.2 mm | 15% | → |
| 72104112 | - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 15% | → |
| 72104119 | - - - - Other | 15% | → |
| 72104191 | - - - - Of a thickness not exceeding 1.2 mm | 15% | → |
| 72104199 | - - - - Other | 15% | → |
| 72104911 | - - - - Coated with zinc by the iron-zinc alloyed coating method, containing by weight less than 0.04 % of carbon and of a thickness not exceeding 1.2 mm | 15% | → |
| 72104914 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness not exceeding 1.2 mm | 15% | → |
| 72104915 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 15% | → |
| 72104916 | - - - - Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.5 mm | 15% | → |
| 72104917 | - - - - Other, of a thickness not exceeding 1.2 mm | 15% | → |
| 72104918 | - - - - Other, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 15% | → |
| 72104919 | - - - - Other | 15% | → |
| 72104991 | - - - - Of a thickness not exceeding 1.2 mm | 15% | → |
| 72104999 | - - - - Other | 15% | → |
| 72105000 | - Plated or coated with chromium oxides or with chromium and chromium oxides | 15% | → |
| 72106111 | - - - - Of a thickness not exceeding 1.2 mm | 15% | → |
| 72106112 | - - - - Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm | 15% | → |
| 72106119 | - - - - Other | 15% | → |
| 72106191 | - - - - Of a thickness not exceeding 1.2 mm | 15% | → |
| 72106192 | - - - - Other, corrugated | 15% | → |
| 72106199 | - - - - Other | 15% | → |
| 72106911 | - - - - Of a thickness not exceeding 1.2 mm | 15% | → |
| 72106919 | - - - - Other | 15% | → |
| 72106991 | - - - - Of a thickness not exceeding 1.2 mm | 15% | → |
| 72106999 | - - - - Other | 15% | → |
| 72107012 | - - - Painted after coating with zinc | 15% | → |
| 72107013 | - - - Painted after coating with aluminium-zinc alloys | 15% | → |
| 72107019 | - - - Other | 15% | → |
| 72107021 | - - - Painted | 15% | → |
| 72107029 | - - - Other | 15% | → |
| 72107091 | - - - Painted | 15% | → |
| 72107099 | - - - Other | 15% | → |
| 72109010 | - - Containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less | 15% | → |
| 72109090 | - - Other | 15% | → |
| 72111312 | - - - - Corrugated | 15% | → |
| 72111313 | - - - - Hoop and strip | 15% | → |
| 72111314 | - - - - Universal plates | 15% | → |
| 72111319 | - - - - Other | 15% | → |
| 72111392 | - - - - Hoop and strip | 15% | → |
| 72111393 | - - - - Universal plates | 15% | → |
| 72111399 | - - - - Other | 15% | → |
| 72111414 | - - - - Corrugated | 15% | → |
| 72111415 | - - - - Coils for re-rolling | 15% | → |
| 72111416 | - - - - Hoop and strip | 15% | → |
| 72111417 | - - - - Universal plates | 15% | → |
| 72111419 | - - - - Other | 15% | → |
| 72111494 | - - - - Hoop and strip | 15% | → |
| 72111495 | - - - - Universal plates | 15% | → |
| 72111499 | - - - - Other | 15% | → |
| 72111913 | - - - - Hoop and strip; universal plates | 15% | → |
| 72111914 | - - - - Corrugated | 15% | → |
| 72111919 | - - - - Other | 15% | → |
| 72111991 | - - - - Hoop and strip; universal plates | 15% | → |
| 72111999 | - - - - Other | 15% | → |
| 72112310 | - - - Corrugated | 15% | → |
| 72112320 | - - - Hoop and strip, of a width not exceeding 400 mm | 15% | → |
| 72112330 | - - - Other, of a thickness of 0.17 mm or less | 15% | → |
| 72112390 | - - - Other | 15% | → |
| 72112910 | - - - Corrugated | 15% | → |
| 72112920 | - - - Hoop and strip, of a width not exceeding 400 mm | 15% | → |
| 72112930 | - - - Other, of a thickness of 0.17 mm or less | 15% | → |
| 72112990 | - - - Other | 15% | → |
| 72119011 | - - - Hoop and strip, of a width not exceeding 25 mm | 15% | → |
| 72119012 | - - - Hoop and strip, of a width exceeding 400 mm | 15% | → |
| 72119013 | - - - Corrugated | 15% | → |
| 72119014 | - - - Other, of a thickness of 0.17mm or less | 15% | → |
| 72119019 | - - - Other | 15% | → |
| 72119091 | - - - Of a thickness of 0.17mm or less | 15% | → |
| 72119099 | - - - Other | 15% | → |
| 72121011 | - - - Hoop and strip, of a width not exceeding 25 mm | 15% | → |
| 72121014 | - - - Hoop and strip, of a width exceeding 400 mm | 15% | → |
| 72121019 | - - - Other | 15% | → |
| 72121094 | - - - Hoop and strip, of a width not exceeding 400 mm | 15% | → |
| 72121099 | - - - Other | 15% | → |
| 72122010 | - - Hoop and strip, of a width not exceeding 400 mm | 15% | → |
| 72122020 | - - Other, containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less | 15% | → |
| 72122090 | - - Other | 15% | → |
| 72123011 | - - - Hoop and strip, of a width not exceeding 25 mm | 15% | → |
| 72123012 | - - - Hoop and strip, of a width exceeding 25 mm and not exceeding 400 mm | 15% | → |
| 72123013 | - - - Other, of a thickness of 1.5 mm or less | 15% | → |
| 72123014 | - - - Other, coated with zinc by the iron-zinc alloy coating method, containing by weight less than 0.04 % of carbon | 15% | → |
| 72123019 | - - - Other | 15% | → |
| 72123090 | - - Other | 15% | → |
| 72124011 | - - - Hoop and strip, of a width not exceeding 400 mm | 15% | → |
| 72124012 | - - - Other hoop and strip | 15% | → |
| 72124013 | - - - Other, painted after coating with zinc | 15% | → |
| 72124014 | - - - Other, painted after coating with aluminium-zinc alloys | 15% | → |
| 72124019 | - - - Other | 15% | → |
| 72124091 | - - - Hoop and strip, of a width not exceeding 400 mm | 15% | → |
| 72124099 | - - - Other | 15% | → |
| 72125014 | - - - Hoop and strip, of a width exceeding 25 mm; universal plates | 15% | → |
| 72125019 | - - - Other | 15% | → |
| 72125023 | - - - Hoop and strip, of a width not exceeding 25 mm | 15% | → |
| 72125024 | - - - Other hoop and strip; universal plates | 15% | → |
| 72125029 | - - - Other | 15% | → |
| 72125093 | - - - Hoop and strip, of a width not exceeding 25 mm | 15% | → |
| 72125094 | - - - Other hoop and strip ; universal plates | 15% | → |
| 72125099 | - - - Other | 15% | → |
| 72126011 | - - - Hoop and strip | 15% | → |
| 72126012 | - - - Other, of a thickness of 1.5 mm or less | 15% | → |
| 72126019 | - - - Other | 15% | → |
| 72126091 | - - - Hoop and strip | 15% | → |
| 72126099 | - - - Other | 15% | → |
| 72131010 | - - Of circular cross-section measuring not exceeding 50 mm in diameter | 5% | → |
| 72131090 | - - Other | 5% | → |
| 72132000 | - Other, of free-cutting steel | 5% | → |