Philippines · Chapter 39· 200 entries

§39Plastics and articles thereof

Section VIIPlastics and rubber, and articles thereof · Chapters 39–40(WCO HS)

Headings (4-digit WCO)

26 headings

3901Primary forms polymers of ethylene, in primary forms3902Polymers of propylene or of other olefins, in primary forms3903Polymers of styrene, in primary forms3904Polymers of vinyl chloride or of other halogenated olefins, in primary forms3905Polymers of vinyl acetate or of other vinyl esters, in primary forms; other vinyl polymers in primary forms3906Acrylic polymers in primary forms3907Polyacetals, other polyethers and epoxide resins, in primary forms; polycarbonates, alkyd resins, polyallylesters and other polyesters, in primary forms3908Polyamides in primary forms3909Amino-resins, phenolic resins and polyurethanes, in primary forms3910Silicones in primary forms3911Petroleum resins, coumarone-indene resins, polyterpenes, polysulphides, polysulphones and other products specified in note 3 to this chapter, not elsewhere specified or included, in primary forms3912Cellulose and its chemical derivatives, not elsewhere specified or included, in primary forms3913Natural polymers (for example, alginic acid) and modified natural polymers (for example, hardened proteins, chemical derivatives of natural rubber), not elsewhere specified or included, in primary forms3914ION–EXCHANGERS BASED ON POLYMERS OF HEADINGS 3901 TO 3913, IN PRIMARY FORMS3915Waste, parings and scrap, of plastics3916Monofilament of which any cross-sectional dimension exceeds 1mm, rods, sticks and profile shapes, whether or not surface-worked but not otherwise worked, of plastics3917Tubes, pipes and hoses, and fittings therefor (for example, joints, elbows, flanges), of plastics3918Floor coverings of plastics, whether or not self-adhesive, in rolls or in the form of tiles; wall or ceiling coverings of plastics, as defined in note 9 to this chapter3919Self-adhesive plates, sheets, film, foil, tape, strip and other flat shapes, of plastics, whether or not in rolls3920Other plates, sheets, film, foil and strip, of plastics, non-cellular and not reinforced, laminated, supported or similarly combined with other materials3921Other plates, sheets, film, foil and strip, of plastics3922Baths, shower-baths, sinks, wash-basins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics3923Baths, shower-baths, sinks, wash-basins, bidets, lavatory pans, seats and covers, flushing cisterns and similar sanitary ware, of plastics3924Tableware, kitchenware, other household articles and hygenic or toilet articles, of plastics3925BUILDERS’ WARE OF PLASTICS, NOT ELSEWHERE SPECIFIED OR INCLUDED3926Other articles of plastics and articles of other materials of headings 3901 to 3914

Philippines tariff lines (top 200)

385 total in chapter — drill into a heading above for the rest
HS CodeDescriptionPrimary rate
3901.10.12- - - Polyethylene containing 5 % or less alpha-olefin monomers10%
3901.10.19- - - Other10%
3901.10.92- - - Polyethylene containing 5 % or less alpha-olefin monomers10%
3901.10.99- - - Other10%
3901.20.00- Polyethylene having a specific gravity of 0.94 or more10%
3901.30.00- Ethylene-vinyl acetate copolymers3%
3901.40.00- Ethylene-alpha-olefin copolymers, having a specific gravity of less than 0.943%
3901.90.40- - In dispersion3%
3901.90.90- - Other3%
3902.10.30- - In dispersion10%
3902.10.40- - Granules, pellets, beads, flakes, chips and similar forms10%
3902.10.90- - Other10%
3902.20.00- Polyisobutylene3%
3902.30.30- - In the form of liquids or pastes10%
3902.30.90- - Other10%
3902.90.10- - Chlorinated polypropylene of a kind suitable for use in printing ink formulation3%
3902.90.90- - Other3%
3903.11.10- - - In the form of granules10%
3903.11.90- - - Other10%
3903.19.10- - - In dispersion10%
3903.19.20- - - Granules, pellets, beads, flakes, chips and similar forms10%
3903.19.90- - - Other10%
3903.20.40- - In aqueous dispersion3%
3903.20.50- - In non-aqueous dispersion3%
3903.20.90- - Other3%
3903.30.40- - In aqueous dispersion3%
3903.30.50- - In non-aqueous dispersion3%
3903.30.60- - In the form of granules3%
3903.30.90- - Other3%
3903.90.30- - In dispersion3%
3903.90.91- - - Impact resistant polymers of styrene, having notched izod impact at 23 °C less than 80 J/m10%
3903.90.99- - - Other10%
3904.10.10- - Homopolymers, suspension type10%
3904.10.91- - - In the form of granules10%
3904.10.92- - - In the form of powder10%
3904.10.99- - - Other10%
3904.21.10- - - In the form of granules10%
3904.21.20- - - In the form of powder10%
3904.21.90- - - Other10%
3904.22.10- - - In dispersion10%
3904.22.20- - - in the form of granules10%
3904.22.30- - - In the form of powder10%
3904.22.90- - - Other10%
3904.30.10- - In the form of granules3%
3904.30.20- - In the form of powder3%
3904.30.90- - Other3%
3904.40.10- - In the form of granules3%
3904.40.20- - In the form of powder3%
3904.40.90- - Other3%
3904.50.40- - In dispersion3%
3904.50.50- - In the form of granules3%
3904.50.60- - In the form of powder3%
3904.50.90- - Other3%
3904.61.10- - - In the form of granules3%
3904.61.20- - - In the form of powder3%
3904.61.90- - - Other3%
3904.69.30- - - In dispersion3%
3904.69.40- - - In the form of granules3%
3904.69.50- - - In the form of powder3%
3904.69.90- - - Other3%
3904.90.30- - In dispersion3%
3904.90.40- - In the form of granules3%
3904.90.50- - In the form of powder3%
3904.90.90- - Other3%
3905.12.00- - In aqueous dispersion3%
3905.19.10- - - In the form of liquids or pastes3%
3905.19.90- - - Other3%
3905.21.00- - In aqueous dispersion3%
3905.29.00- - Other3%
3905.30.10- - In dispersion1%
3905.30.90- - Other3%
3905.91.10- - - In dispersion3%
3905.91.90- - - Other3%
3905.99.10- - - In aqueous dispersion3%
3905.99.20- - - In non-aqueous dispersion3%
3905.99.90- - - Other3%
3906.10.10- - In dispersion3%
3906.10.90- - Other3%
3906.90.20- - In dispersion7%
3906.90.92- - - Sodium polyacrylate3%
3906.90.99- - - Other7%
3907.10.00- Polyacetals3%
3907.21.00- - Bis(polyoxyethylene) methylphosphonate3%
3907.29.10- - - Polytetramethylene ether glycol3%
3907.29.90- - - Other3%
3907.30.20- - Of a kind used for coating, in powder form10%
3907.30.30- - In the form of liquids or pastes1%
3907.30.90- - Other1%
3907.40.00- Polycarbonates3%
3907.50.10- - In the form of liquids or pastes10%
3907.50.90- - Other10%
3907.61.00- - Having a viscosity number of 78 ml/g or higher5%
3907.69.10- - - Granules and similar forms5%
3907.69.90- - - Other5%
3907.70.00- Poly(lactic acid)1%
3907.91.20- - - Granules and similar forms5%
3907.91.30- - - In the form of liquids or pastes5%
3907.91.90- - - Other5%
3907.99.40- - - Of a kind used for coating, in powder form10%
3907.99.50- - - Thermoplastic liquid crystal aromatic polyester copolymers0%
3907.99.60- - - Polybutylene succinate (PBS)1%
3907.99.90- - - Other1%
3908.10.10- - Polyamide-61%
3908.10.90- - Other3%
3908.90.00- Other5%
3909.10.10- - Moulding compounds3%
3909.10.90- - Other5%
3909.20.10- - Moulding compounds3%
3909.20.90- - Other5%
3909.31.10- - - Of a kind used for moulding3%
3909.31.90- - - Other7%
3909.39.10- - - Moulding compounds3%
3909.39.91- - - - Glyoxal monourein resin7%
3909.39.99- - - - Other7%
3909.40.10- - Moulding compounds other than phenol formaldehyde3%
3909.40.90- - Other7%
3909.50.00- Polyurethanes3%
3910.00.20- In dispersion and in solutions1%
3910.00.90- Other1%
3911.10.00- Petroleum resins, coumarone, indene or coumarone-indene resins and polyterpenes3%
3911.20.00- Poly(1,3-phenylene methylphosphonate)3%
3911.90.00- Other3%
3912.11.00- - Non-plasticised3%
3912.12.00- - Plasticised3%
3912.20.11- - - Water-damped nitrocellulose3%
3912.20.12- - - Alcohol-damped nitrocellulose7%
3912.20.19- - - Other7%
3912.20.20- - Plasticised3%
3912.31.00- - Carboxymethylcellulose and its salts3%
3912.39.00- - Other1%
3912.90.20- - In the form of granules3%
3912.90.90- - Other3%
3913.10.00- Alginic acid, its salts and esters3%
3913.90.10- - Hardened proteins3%
3913.90.20- - Chemical derivatives of natural rubber3%
3913.90.30- - Starch-based polymers3%
3913.90.90- - Other3%
3914.00.00Ion-exchangers based on polymers of headings 39.01 to 39.13, in primary forms.3%
3915.10.10- - Of non-rigid cellular products5%
3915.10.90- - Other5%
3915.20.10- - Of non-rigid cellular products5%
3915.20.90- - Other5%
3915.30.10- - Of non-rigid cellular products1%
3915.30.90- - Other1%
3915.90.10- - Of poly(ethylene terephthalate)5%
3915.90.20- - Of polypropylene5%
3915.90.30- - Of polycarbonate5%
3915.90.40- - Of polyvinyl Acetals5%
3915.90.50- - Of phenolic resins; of amino resins; of hardened proteins; of chemical derivatives of natural rubber5%
3915.90.90- - Other5%
3916.10.10- - Monofilament15%
3916.10.20- - Rods, sticks and profile shapes15%
3916.20.10- - Monofilament15%
3916.20.20- - Rods, sticks and profile shapes15%
3916.90.11- - - Of polypropylene15%
3916.90.12- - - Of polystyrene15%
3916.90.19- - - Other15%
3916.90.21- - - Of phenolic resins; of amino-resins15%
3916.90.22- - - Of polyamides15%
3916.90.29- - - Other15%
3916.90.30- - Of regenerated cellulose; of cellulose nitrate, cellulose acetate and other cellulose esters, cellulose ethers and other chemical derivatives of cellulose, plasticised15%
3916.90.40- - Of hardened proteins15%
3916.90.50- - Of vulcanised fibre15%
3916.90.60- - Of chemical derivatives of natural rubber15%
3916.90.91- - - Monofilament15%
3916.90.92- - - Rods, sticks and profile shapes15%
3917.10.10- - Of hardened protein3%
3917.10.90- - Other3%
3917.21.00- - Of polymers of ethylene15%
3917.22.00- - Of polymers of propylene15%
3917.23.00- - Of polymers of vinyl chloride15%
3917.29.11- - - - Of other addition polymerisation products15%
3917.29.19- - - - Other15%
3917.29.21- - - - Of other addition polymerisation products15%
3917.29.22- - - - Of phenolic resins15%
3917.29.23- - - - Of amino-resins; of hardened proteins; of chemical derivatives of natural rubber15%
3917.29.24- - - - Of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised; of vulcanised fibre15%
3917.29.25- - - - Of other condensation or rearrangement polymerisation products15%
3917.29.29- - - - Other15%
3917.31.11- - - - Of addition polymerisation products15%
3917.31.12- - - - Of amino-resins; of phenolic resins; of vulcanised fibre; of chemical derivatives of natural rubber15%
3917.31.19- - - - Other15%
3917.31.21- - - - Of addition polymerisation products15%
3917.31.23- - - - Of amino-resins; of phenolic resins; of chemical derivatives of natural rubber15%
3917.31.24- - - - Of vulcanised fibre15%
3917.31.25- - - - Of other condensation or rearrangement polymerisation products; of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised15%
3917.31.29- - - - Other15%
3917.32.10- - - Sausage or ham casings3%
3917.32.20- - - Thermoplastic hoses for gas stove15%
3917.32.91- - - - - Of addition polymerisation products; of phenolic resins or amino resins; of chemical derivatives of natural rubber15%
3917.32.92- - - - - Other15%
3917.32.93- - - - - Of addition polymerisation products15%
3917.32.94- - - - - Of amino-resins or phenolic resins; of chemical derivatives of natural rubber15%
3917.32.95- - - - - Of other condensation or rearrangement polymerisation products; of vulcanised fibre; of cellulose nitrate, cellulose acetates and other chemical derivatives of cellulose, plasticised15%
3917.32.99- - - - - Other15%
3917.33.10- - - Other, further worked than merely surface-worked15%
3917.33.90- - - Other15%
3917.39.11- - - - Of addition polymerisation products; of vulcanised fibre15%
3917.39.12- - - - Of phenolic resins or amino resins; of chemical derivatives of natural rubber15%
3917.39.19- - - - Other15%
Philippines HS Chapter 39: Plastics and articles thereof · Treayo