Philippines · Chapter 73· 200 entries
§73Articles of iron or steel
Section XVBase metals and articles of base metal · Chapters 72–83（WCO HS）
Headings (4-digit WCO)
25 headings
7301Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel→7302RAILWAY OR TRAMWAY TRACK CONSTRUCTION MATERIAL OF IRON OR STEEL, THE FOLLOWING: RAILS, CHECK-RAILS AND RACK RAILS, SWITCH BLADES, CROSSING FROGS, POINT RODS AND OTHER CROSSING PIECES, SLEEPERS (CROSS-TIES), FISH PLATES, CHAIRS, CHAIR WEDGES, SOLE PLATES (BASE PLATES), RAIL CLIPS, BEDPLATES, TIES AND OTHER MATERIAL SPECIALIZED FOR JOINTING OR FIXING RAILS→7303Tubes, pipes and hollow profiles, of cast iron→7304Tubes, pipes and hollow profiles, seamless, of iron (other than cast iron) or steel→7305Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel→7306Other tubes, pipes and hollow profiles (for example, open seam or welded, riveted or similarly closed), of iron or steel→7307Tube or pipe fittings (for example, couplings, elbows, sleeves), of iron or steel→7309Reservoirs, tanks, vats and similar containers for any material (other than compressed or liquefied gas), of iron or steel, of a capacity exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment→7310Tanks, casks, drums, cans, boxes and similar containers, for any material (other than compressed or liquefied gas), of iron or steel, of a capacity not exceeding 300 l, whether or not lined or heatinsulated, but not fitted with mechanical or thermal equipment→7311Containers for compressed or liquefied gas, of iron or steel→7312Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated→7313Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel→7314Cloth (including endless bands), grill, netting and fencing, of iron or steel wire; expanded metal of iron or steel→7315Chain and parts thereof, of iron or steel→7316Anchors, grapnels and parts thereof, of iron or steel→7317Nails, tacks, drawing pins, corrugated nails, staples (other than those of heading 8305) and similar articles, of iron or steel, whether or not with heads of other material, but excluding such articles with heads of copper→7318Screws, bolts, nuts, coach-screws, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of iron or steel→7319Sewing needles, knitting needles, bodkins, crochet hooks, embroidery stilettos and similar articles, for use in the hand, of iron or steel; safety pins and other pins, of iron or steel, not elsewhere specified or included→7320Springs and leaves for springs, of iron or steel→7321Stoves, ranges, grates, cookers (including those with subsidiary boilers for central heating), barbecues, braziers, gas-rings, plate warmers and similar non-electric domestic appliances, and parts thereof, of iron or steel→7322Radiators for central heating, not electrically heated, and parts thereof, of iron or steel; air heaters and hot air distributors (including distributors which can also distribute fresh or conditioned air), not electrically heated, incorporating a motor-driven fan or blower, and parts thereof, of iron or steel→7323Table, kitchen or other household articles and parts thereof, of iron or steel; iron or steel wool; pot scourers and scouring or polishing pads, gloves and the like, of iron or steel→7324Sanitary ware and parts thereof, of iron or steel→7325Other cast articles of iron or steel→7326Other articles of iron or steel→
Philippines tariff lines (top 200)
277 total in chapter — drill into a heading above for the rest| HS Code | Description | Primary rate | |
|---|---|---|---|
| 7301.10.00 | - Sheet piling | 3% | → |
| 7301.20.00 | - Angles, shapes and sections | 3% | → |
| 7302.10.00 | - Rails | 0% | → |
| 7302.30.00 | - Switch blades, crossing frogs, point rods and other crossing pieces | 3% | → |
| 7302.40.00 | - Fish-plates and sole plates | 3% | → |
| 7302.90.10 | - - Sleepers (cross-ties) | 3% | → |
| 7302.90.90 | - - Other | 3% | → |
| 7303.00.11 | - - Hubless tubes and pipes | 5% | → |
| 7303.00.19 | - - Other | 10% | → |
| 7303.00.91 | - - With an external diameter not exceeding 100 mm | 10% | → |
| 7303.00.99 | - - Other | 10% | → |
| 7304.11.00 | - - Of stainless steel | 3% | → |
| 7304.19.00 | - - Other | 3% | → |
| 7304.22.10 | - - - With a yield strength less than 80,000 psi, without threaded end | 3% | → |
| 7304.22.90 | - - - Other | 3% | → |
| 7304.23.10 | - - - With a yield strength less than 80,000 psi, without threaded end | 3% | → |
| 7304.23.90 | - - - Other | 3% | → |
| 7304.24.10 | - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end | 3% | → |
| 7304.24.20 | - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end | 3% | → |
| 7304.24.30 | - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end | 3% | → |
| 7304.29.10 | - - - Casing and tubing with a yield strength less than 80,000 psi, without threaded end | 3% | → |
| 7304.29.20 | - - - Casing and tubing with a yield strength less than 80,000 psi, with threaded end | 3% | → |
| 7304.29.30 | - - - Casing and tubing with a yield strength 80,000 psi or more, whether or not with threaded end | 3% | → |
| 7304.31.10 | - - - Drillrod casing and tubing with pin and box threads | 3% | → |
| 7304.31.20 | - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi | 5% | → |
| 7304.31.40 | - - - Other, having an external diameter of less than 140 mm and containing less than 0.45 % by weight of carbon | 5% | → |
| 7304.31.90 | - - - Other | 5% | → |
| 7304.39.20 | - - - High-pressure pipe capable of withstanding a pressure of not less than 42,000 psi | 5% | → |
| 7304.39.40 | - - - Other, having an external diameter of less than 140 mm and containing less than 0.45 % by weight of carbon | 5% | → |
| 7304.39.90 | - - - Other | 5% | → |
| 7304.41.00 | - - Cold-drawn or cold-rolled (cold-reduced) | 5% | → |
| 7304.49.00 | - - Other | 3% | → |
| 7304.51.10 | - - - Drillrod casing and tubing with pin and box threads | 3% | → |
| 7304.51.20 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | 5% | → |
| 7304.51.90 | - - - Other | 5% | → |
| 7304.59.10 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | 3% | → |
| 7304.59.90 | - - - Other | 3% | → |
| 7304.90.10 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | 3% | → |
| 7304.90.30 | - - Other, having an external diameter of less than 140 mm and containing less than 0.45 % by weight of carbon | 3% | → |
| 7304.90.90 | - - Other | 3% | → |
| 7305.11.00 | - - Longitudinally submerged arc welded | 3% | → |
| 7305.12.10 | - - - Electric resistance welded (ERW) | 3% | → |
| 7305.12.90 | - - - Other | 3% | → |
| 7305.19.10 | - - - Spiral or helical submerged arc welded | 3% | → |
| 7305.19.90 | - - - Other | 3% | → |
| 7305.20.00 | - Casing of a kind used in drilling for oil or gas | 3% | → |
| 7305.31.10 | - - - Stainless steel pipes and tubes | 5% | → |
| 7305.31.90 | - - - Other | 10% | → |
| 7305.39.10 | - - - High-pressure pipe with a yield strength not less than 42,000 psi | 10% | → |
| 7305.39.90 | - - - Other | 10% | → |
| 7305.90.00 | - Other | 10% | → |
| 7306.11.10 | - - - Longitudinally electric resistance welded (ERW) | 10% | → |
| 7306.11.90 | - - - Other | 10% | → |
| 7306.19.10 | - - - Longitudinally electric resistance welded (ERW) | 10% | → |
| 7306.19.20 | - - - Spiral or helical submerged arc welded | 10% | → |
| 7306.19.90 | - - - Other | 10% | → |
| 7306.21.00 | - - Welded, of stainless steel | 10% | → |
| 7306.29.00 | - - Other | 10% | → |
| 7306.30.11 | - - - With an external diameter less than 12.5 mm | 3% | → |
| 7306.30.19 | - - - Other | 3% | → |
| 7306.30.21 | - - - With an external diameter less than 12.5 mm | 1% | → |
| 7306.30.29 | - - - Other | 1% | → |
| 7306.30.30 | - - Pipe of a kind used to make sheath pipe (heater pipe) for heating elements of electric flat irons or rice cookers, with an external diameter not exceeding 12 mm | 3% | → |
| 7306.30.41 | - - - With an external diameter less than 12.5 mm | 7% | → |
| 7306.30.49 | - - - Other | 7% | → |
| 7306.30.91 | - - - With an internal diameter of 12.5 mm or more, an external diameter less than 140 mm and containing by weight less than 0.45 % of carbon | 7% | → |
| 7306.30.92 | - - - With an internal diameter less than 12.5 mm | 7% | → |
| 7306.30.99 | - - - Other | 7% | → |
| 7306.40.11 | - - - With an external diameter not exceeding 12.5 mm | 3% | → |
| 7306.40.19 | - - - Other | 3% | → |
| 7306.40.20 | - - Stainless steel pipes and tubes, with an external diameter exceeding 105 mm | 3% | → |
| 7306.40.30 | - - Pipes and tubes containing by weight at least 30 % of nickel, with an external diameter not exceeding 10 mm | 3% | → |
| 7306.40.90 | - - Other | 7% | → |
| 7306.50.11 | - - - With an external diameter less than 12.5 mm | 3% | → |
| 7306.50.19 | - - - Other | 3% | → |
| 7306.50.91 | - - - With an external diameter less than 12.5 mm | 7% | → |
| 7306.50.99 | - - - Other | 7% | → |
| 7306.61.10 | - - - With an external diagonal cross-section less than 12.5 mm | 7% | → |
| 7306.61.90 | - - - Other | 7% | → |
| 7306.69.10 | - - - With an external diagonal cross-section less than 12.5 mm | 7% | → |
| 7306.69.90 | - - - Other | 7% | → |
| 7306.90.11 | - - - With an external diagonal cross-section less than 12.5 mm | 3% | → |
| 7306.90.19 | - - - Other | 3% | → |
| 7306.90.91 | - - - High pressure pipes with a yield strength not less than 42,000 psi, with an internal diameter of less than 12.5 mm | 7% | → |
| 7306.90.94 | - - - Other high pressure pipes, with an external diameter of less than 12.5 mm | 7% | → |
| 7306.90.95 | - - - Other high pressure pipes, with an external diameter of 12.5 mm or more | 7% | → |
| 7306.90.96 | - - - Other, with an external diagonal cross-section less than 12.5 mm | 7% | → |
| 7306.90.97 | - - - Other, with an internal diameter more than 12.5 mm, an external diameter less than 140 mm and containing by weight less than 0.45% of carbon | 7% | → |
| 7306.90.99 | - - - Other | 7% | → |
| 7307.11.10 | - - - Hubless tube or pipe fittings | 5% | → |
| 7307.11.90 | - - - Other | 10% | → |
| 7307.19.00 | - - Other | 10% | → |
| 7307.21.10 | - - - Having an internal diameter of less than 15 cm | 3% | → |
| 7307.21.90 | - - - Other | 3% | → |
| 7307.22.10 | - - - Having an internal diameter of less than 15 cm | 3% | → |
| 7307.22.90 | - - - Other | 3% | → |
| 7307.23.10 | - - - Having an internal diameter of less than 15 cm | 7% | → |
| 7307.23.90 | - - - Other | 7% | → |
| 7307.29.10 | - - - Having an internal diameter of less than 15 cm | 3% | → |
| 7307.29.90 | - - - Other | 3% | → |
| 7307.91.10 | - - - Having an internal diameter of less than 15 cm | 3% | → |
| 7307.91.90 | - - - Other | 3% | → |
| 7307.92.10 | - - - Having an internal diameter of less than 15 cm | 10% | → |
| 7307.92.90 | - - - Other | 10% | → |
| 7307.93.10 | - - - Having an internal diameter of less than 15 cm | 10% | → |
| 7307.93.90 | - - - Other | 10% | → |
| 7307.99.10 | - - - Having an internal diameter of less than 15 cm | 1% | → |
| 7307.99.90 | - - - Other | 1% | → |
| 7308.10.10 | - - Prefabricated modular type joined by shear connectors | 3% | → |
| 7308.10.90 | - - Other | 10% | → |
| 7308.20.11 | - - - Prefabricated modular type joined by shear connectors | 3% | → |
| 7308.20.19 | - - - Other | 10% | → |
| 7308.20.21 | - - - Prefabricated modular type joined by shear connectors | 3% | → |
| 7308.20.29 | - - - Other | 10% | → |
| 7308.30.10 | - - Doors, of a thickness of 6 mm or more but not exceeding 8 mm | 10% | → |
| 7308.30.90 | - - Other | 10% | → |
| 7308.40.10 | - - Prefabricated modular type joined by shear connectors | 3% | → |
| 7308.40.90 | - - Other | 10% | → |
| 7308.90.20 | - - Prefabricated modular type joined by shear connectors | 3% | → |
| 7308.90.40 | - - Corrugated and curved galvanised plates or sheets prepared for use in conduits, culverts or tunnels | 3% | → |
| 7308.90.50 | - - Rails for ships | 1% | → |
| 7308.90.60 | - - Perforated cable trays | 10% | → |
| 7308.90.92 | - - - Guardrails | 10% | → |
| 7308.90.99 | - - - Other | 10% | → |
| 7309.00.11 | - - Lined or heat-insulated | 10% | → |
| 7309.00.19 | - - Other | 10% | → |
| 7309.00.91 | - - Lined or heat-insulated | 10% | → |
| 7309.00.99 | - - Other | 10% | → |
| 7310.10.10 | - - Of tinplate | 10% | → |
| 7310.10.91 | - - - Casting, forging or stamping, in the rough state | 10% | → |
| 7310.10.99 | - - - Other | 10% | → |
| 7310.21.11 | - - - - Of tinplate | 7% | → |
| 7310.21.19 | - - - - Other | 7% | → |
| 7310.21.91 | - - - - Of tinplate | 7% | → |
| 7310.21.99 | - - - - Other | 7% | → |
| 7310.29.11 | - - - - Of tinplate | 10% | → |
| 7310.29.19 | - - - - Other | 10% | → |
| 7310.29.91 | - - - - Of tinplate | 10% | → |
| 7310.29.92 | - - - - Other casting, forging or stamping, in the rough state | 10% | → |
| 7310.29.99 | - - - - Other | 10% | → |
| 7311.00.21 | - - Of a capacity of 30 l or more, but less than 110 l, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) | 0% | → |
| 7311.00.22 | - - Of a capacity of 110 l or more, for Automotive Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG) | 0% | → |
| 7311.00.23 | - - Of a capacity of less than 30 l, for Liquefied Petroleum Gas (LPG) | 10% | → |
| 7311.00.24 | - - Of a capacity of 30 l or more, but less than 110 l, for Liquefied Petroleum Gas (LPG) | 10% | → |
| 7311.00.25 | - - Other, for Liquefied Petroleum Gas (LPG) | 10% | → |
| 7311.00.26 | - - Other, of a capacity of less than 30 l | 0% | → |
| 7311.00.27 | - - Other, of a capacity of 30 l or more, but less than 110 l | 0% | → |
| 7311.00.29 | - - Other | 0% | → |
| 7311.00.91 | - - Of a capacity not exceeding 7.3 l | 10% | → |
| 7311.00.92 | - - Of a capacity more than 7.3 l but less than 30 l | 10% | → |
| 7311.00.94 | - - Of a capacity of 30 l or more, but less than 110 l | 10% | → |
| 7311.00.99 | - - Other | 10% | → |
| 7312.10.10 | - - Locked coils, flattened strands and non-rotating wire ropes | 3% | → |
| 7312.10.20 | - - Plated or coated with brass and of a diameter not exceeding 3 mm | 0% | → |
| 7312.10.30 | - - Plated or coated with aluminium | 15% | → |
| 7312.10.91 | - - - Stranded steel wire for prestressing concrete | 15% | → |
| 7312.10.99 | - - - Other | 15% | → |
| 7312.90.00 | - Other | 15% | → |
| 7313.00.00 | Barbed wire of iron or steel; twisted hoop or single flat wire, barbed or not, and loosely twisted double wire, of a kind used for fencing, of iron or steel. | 10% | → |
| 7314.12.00 | - - Endless bands for machinery, of stainless steel | 3% | → |
| 7314.14.00 | - - Other woven cloth, of stainless steel | 3% | → |
| 7314.19.10 | - - - Endless bands for machinery other than of stainless steel | 3% | → |
| 7314.19.90 | - - - Other | 5% | → |
| 7314.20.00 | - Grill, netting and fencing, welded at the intersection, of wire with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm² or more | 10% | → |
| 7314.31.00 | - - Plated or coated with zinc | 10% | → |
| 7314.39.00 | - - Other | 10% | → |
| 7314.41.00 | - - Plated or coated with zinc | 10% | → |
| 7314.42.00 | - - Coated with plastics | 10% | → |
| 7314.49.00 | - - Other | 10% | → |
| 7314.50.00 | - Expanded metal | 10% | → |
| 7315.11.10 | - - - Bicycle or motorcycle chain | 1% | → |
| 7315.11.91 | - - - - Transmission type, of a pitch length of not less than 6 mm and not more than 32 mm | 0% | → |
| 7315.11.99 | - - - - Other | 0% | → |
| 7315.12.10 | - - - Bicycle or motorcycle chain | 1% | → |
| 7315.12.90 | - - - Other | 1% | → |
| 7315.19.10 | - - - Of bicycle or motorcycle chain | 1% | → |
| 7315.19.90 | - - - Other | 0% | → |
| 7315.20.00 | - Skid chain | 3% | → |
| 7315.81.00 | - - Stud-link | 1% | → |
| 7315.82.00 | - - Other, welded link | 7% | → |
| 7315.89.10 | - - - Bicycle or motorcycle chain | 7% | → |
| 7315.89.90 | - - - Other | 7% | → |
| 7315.90.20 | - - Of bicycle or motorcycle chain | 7% | → |
| 7315.90.90 | - - Other | 7% | → |
| 7316.00.00 | Anchors, grapnels and parts thereof, of iron or steel. | 1% | → |
| 7317.00.10 | - Wire nails | 10% | → |
| 7317.00.20 | - Staples | 10% | → |
| 7317.00.30 | - Dog spikes for rail sleepers; gang nails | 10% | → |
| 7317.00.90 | - Other | 10% | → |
| 7318.11.00 | - - Coach screws | 10% | → |
| 7318.12.10 | - - - Having a shank of an external diameter not exceeding 16 mm | 10% | → |
| 7318.12.90 | - - - Other | 10% | → |
| 7318.13.00 | - - Screw hooks and screw rings | 10% | → |
| 7318.14.10 | - - - Having a shank of an external diameter not exceeding 16 mm | 10% | → |
| 7318.14.90 | - - - Other | 10% | → |
| 7318.15.10 | - - - Having a shank of an external diameter not exceeding 16 mm | 10% | → |
| 7318.15.90 | - - - Other | 10% | → |
| 7318.16.10 | - - - For bolts having a shank of an external diameter not exceeding 16 mm | 10% | → |
| 7318.16.90 | - - - Other | 10% | → |
| 7318.19.10 | - - - Having a shank of an external diameter not exceeding 16 mm | 10% | → |