What product does HS code 8501320065 refer to?

HS 8501320065 falls under Chapter 85 (Electrical machinery; electronics), heading 8501 (Electric motors and generators (excluding generating sets)). Specifically: Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct curr.

What documents are required to import HS 8501320065 into United Kingdom?

Typically required: commercial invoice, packing list, bill of lading / airway bill, certificate of origin (for preferential rates). Confirm latest requirements with United Kingdom Customs.

How to calculate landed cost for importing HS 8501320065 into United Kingdom?

Use CIF (goods + freight + insurance) × 0.00 % = import duty. Then add VAT 20.00 % = landed cost. Treayo provides an online calculator at https://treayo.com/en/calculator/uk.

WCO classification path

Chapter85Electrical machinery; electronics
Heading8501Electric motors and generators (excluding generating sets)
Subheading850132Other DC motors; DC generators, other than photovoltaic generators
National8501320065Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with: - a specified speed of not more than 6000rpm, - a minimum output of 400w, but not more than 1,3kw (at 12 v), or with a minimum output of 750w but not more than 1,55kw (at 36 v), - a flange diameter of 85mm or more but not more than 200mm, - a maximum length of 335mm, measured from the beginning of the shaft to the outer ending, - a housing length of not more than 265mm, measured from the flange to the outer ending, - a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an o-ring and grease), - a stator with single t-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and - surface magnets, - whether or not with electronic power steering controller, - whether or not with pulley or coupling, - whether or not with rotor position sensor

8501320065

ACTIVE

What is the United Kingdom import tariff for HS 8501320065 (Ready for installation in vehicles or equipment of)?

Quick answer: United Kingdom Import duty (third-country) for HS 8501320065 is 0.00 %, plus VAT 20.00 %.

"Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with: - a specified speed of not more than 6000rpm, - a minimum output of 400w, but not more than 1,3kw (at 12 v), or with a minimum output of 750w but not more than 1,55kw (at 36 v), - a flange diameter of 85mm or more but not more than 200mm, - a maximum length of 335mm, measured from the beginning of the shaft to the outer ending, - a housing length of not more than 265mm, measured from the flange to the outer ending, - a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an o-ring and grease), - a stator with single t-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and - surface magnets, - whether or not with electronic power steering controller, - whether or not with pulley or coupling, - whether or not with rotor position sensor "

HS code 8501320065 (Chapter 85 "Electrical machinery; electronics"; Heading 8501 "Electric motors and generators (excluding generating sets)"; Subheading 850132 "Other DC motors; DC generators, other than photovoltaic generators") under the United Kingdom tariff schedule classifies "Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with: - a specified speed of not more than 6000rpm, - a minimum output of 400w, but not more than 1,3kw (at 12 v), or with a minimum output of 750w but not more than 1,55kw (at 36 v), - a flange diameter of 85mm or more but not more than 200mm, - a maximum length of 335mm, measured from the beginning of the shaft to the outer ending, - a housing length of not more than 265mm, measured from the flange to the outer ending, - a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an o-ring and grease), - a stator with single t-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and - surface magnets, - whether or not with electronic power steering controller, - whether or not with pulley or coupling, - whether or not with rotor position sensor ". United Kingdom customs apply Import duty (third-country) of 0.00 %, VAT 20.00 %. Statutory unit of measure: Number of items.