HS Code	Description	Primary rate
8501320010	For use in civil aircraft	0.00 %
8501320040	Dc motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:<br>-an external diameter of 24,2 mm or more, but not more than 140 mm,<br>-a rated speed of 3300 rpm or more, but not more than 26200 rpm,<br>-a rated supply voltage of 3,6 v or more, but not more than 230 v,<br>-an output power of more than 37,5 w , but not more than 2400 w,<br>-a free load current of not more than 20,1 a,<br>-a maximum efficiency of 50 % or more,	0.00 %
8501320065	Ready for installation in vehicles or equipment of headings 8432 and 8433, brushless and permanently excited direct current motor with:<br>- a specified speed of not more than 6000rpm,<br>- a minimum output of 400w, but not more than 1,3kw (at 12 v), or with a minimum output of 750w but not more than 1,55kw (at 36 v),<br>- a flange diameter of 85mm or more but not more than 200mm,<br>- a maximum length of 335mm, measured from the beginning of the shaft to the outer ending,<br>- a housing length of not more than 265mm, measured from the flange to the outer ending,<br>- a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an o-ring and grease),<br>- a stator with single t-tooth design and single coil windings in 9/6 or 12/8 or 12/10 topology, and<br>- surface magnets,<br>- whether or not with electronic power steering controller,<br>- whether or not with pulley or coupling,<br>- whether or not with rotor position sensor<br>	0.00 %
8501320099	Other	0.00 %