United Kingdom · Chapter 74· 73 entries

§74Copper and articles

Section XVBase metals and articles of base metal · Chapters 72–83(WCO HS)

Headings (4-digit WCO)

16 headings

United Kingdom tariff lines (top 73)

73 total in chapter
HS CodeDescriptionPrimary rate
7400000000Copper and articles thereof
7401000000Copper mattes; cement copper (precipitated copper)0.00 %
7402000000Unrefined copper; copper anodes for electrolytic refining0.00 %
7403110000Cathodes and sections of cathodes0.00 %
7403120000Wire-bars0.00 %
7403130000Billets0.00 %
7403190000Other0.00 %
7403210000Copper-zinc base alloys (brass)0.00 %
7403220000Copper-tin base alloys (bronze)0.00 %
7403290000Other copper alloys (other than master alloys of heading 7405)0.00 %
7404001000Of refined copper0.00 %
7404009100Of copper-zinc base alloys (brass)0.00 %
7404009900Other0.00 %
7405000000Master alloys of copper0.00 %
7406100000Powders of non-lamellar structure0.00 %
7406200000Powders of lamellar structure; flakes0.00 %
7407100000Of refined copper0.00 %
7407211000Bars and rods0.00 %
7407219000Profiles0.00 %
7407290000Other0.00 %
7408110000Of which the maximum cross-sectional dimension exceeds 6 mm4.00 %
7408191000Of which the maximum cross-sectional dimension exceeds 0,5 mm4.00 %
7408199000Of which the maximum cross-sectional dimension does not exceed 0,5 mm4.00 %
7408210000Of copper-zinc base alloys (brass)4.00 %
7408220000Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)4.00 %
7408290000Other4.00 %
7409110000In coils0.00 %
7409190000Other0.00 %
7409210000In coils0.00 %
7409290000Other0.00 %
7409310000In coils0.00 %
7409390000Other0.00 %
7409400000Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)0.00 %
7409900000Of other copper alloys0.00 %
7410110050Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more but not more than 0,150 mm, used for the manufacture of laminates for printed circuit boards and of printed circuit boards in the printed circuit board industry0.00 %
7410110090Other0.00 %
7410120000Of copper alloys0.00 %
7410210010Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil0.00 %
7410210020Foils, rolls composed of one layer of glass epoxy of 100 µm colaminated with refined copper foil on one or two sides of 35 µm with a tolerance of 10 % for use in the production of smart cards0.00 %
7410210030Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil0.00 %
7410210040Sheet or plates:<br>- consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or<br>- consisting of multiple layers of paper, impregnated with phenolic resin,<br>coated on one or both sides with a copper film with a maximum thickness of 0,15 mm0.00 %
7410210050Plates:<br>-consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin,<br>-covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and<br>-with a dielectric constant (dk) of less than 3,9 and a loss factor (df) of less than 0,015 at a measuring frequency of 10 ghz, as measured according to ipc-tm-6500.00 %
7410210055Plates:<br>- consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,<br>- covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,<br>- with a dielectric constant (dk) of less than 5,4 at 1 mhz, as measured according to ipc-tm-650 2.5.5.2,<br>- with a loss tangent of less than 0,035 at 1 mhz, as measured according to ipc-tm-650 2.5.5.2,<br>- with a comparative tracking index (cti) of 600 or more0.00 %
7410210090Other0.00 %
7410220000Of copper alloys0.00 %
7411101000Straight4.00 %
7411109010Pipes and tubes, of refined copper, in level wound coils, whether smooth or with inner grooves, not further processed4.00 %
7411109090Other4.00 %
7411211000Straight4.00 %
7411219000Other4.00 %
7411220000Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)4.00 %
7411290000Other4.00 %
7412100000Of refined copper0.00 %
7412200000Of copper alloys0.00 %
7413000010With fittings attached, for use in civil aircraft0.00 %
7413000020Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed0.00 %
7413000090Other0.00 %
7415100000Nails and tacks, drawing pins, staples and similar articles0.00 %
7415210000Washers (including spring washers)0.00 %
7415290000Other0.00 %
7415330000Screws; bolts and nuts0.00 %
7415390000Other0.00 %
7418101000Cooking or heating apparatus of a kind used for domestic purposes, non-electric, and parts thereof0.00 %
7418109010Hand-made0.00 %
7418109090Other0.00 %
7418200010Hand-made0.00 %
7418200090Other0.00 %
7419200010Hand-made0.00 %
7419200090Other0.00 %
7419801000Cloth (including endless bands), grill and netting, of wire of which no cross-sectional dimension exceeds 6 mm; expanded metal0.00 %
7419803000Springs0.00 %
7419809010Hand-made0.00 %
7419809098Other0.00 %
United Kingdom HS Chapter 74: Copper and articles · Treayo