United Kingdom · Heading· 3 subheadings· 22 codes
8409Parts suitable for use solely or principally with the engines of heading 8407 or 8408
Subheadings (6-digit WCO)
United Kingdom tariff lines (10-digit)
All national sub-divisions in United Kingdom's tariff schedule
| HS Code | Description | Primary rate |
|---|---|---|
| 8409100010 | For engines for use in civil aircraft | 0.00 % |
| 8409100020 | Intended to be fitted in aircraft imported duty free or built within the community | 0.00 % |
| 8409100090 | Other | 0.00 % |
| 8409910015 | Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy en ac-45500, with:<br>- no other components,<br>- a hardness of 52 hrb or more,<br>- casting defects size of not more than 0,4 mm and not more than 10 defects per cm²,<br>- a dendrite arm space in combustion chamber of not more than 25 μm,<br>- a double deck water jacket design,<br>- a weight of 14 kg or more but not more than 19 kg,<br>- a length of 506 mm or more but not more than 510 mm,<br>- a height of 282 mm or more but not more than 286 mm and<br>- a width of 143,7 mm or more but not more than 144,3 mm | 2.00 % |
| 8409910028 | Carburetor with :<br>-2 mounting holes with a diameter of 31 mm,<br>-a choke bore diameter of 18 mm or more, but not more than 19,05 mm<br>for use in the manufacture of a two-stroke engine grass trimmer | 2.00 % |
| 8409910033 | Camshaft carrier for a spark-ignition piston internal combustion engine, made of adc12 aluminium alloy, with:<br>-a weight of 4,0 kg or more but not more than 5,5 kg,<br>-a wall thickness of 2,0 mm or more but not more than 6,0 mm,<br>for use in the manufacture of motor vehicle engines | 2.00 % |
| 8409910035 | Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with:<br>-an operating pressure of not more than 22,5 mpa,<br>-solenoid direct injector,<br>-analog pressure sensor for not more than 22,5 mpa | 2.00 % |
| 8409910038 | Crankcase for 4-cylinder spark-ignition piston internal combustion engine, made of adc12 aluminium alloy, for use in the manufacture of motor vehicle engines | 2.00 % |
| 8409910040 | Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles | 2.00 % |
| 8409910045 | Metal alloy intake and exhaust valve, with a rockwell hardness hrc 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles | 2.00 % |
| 8409910050 | Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm | 2.00 % |
| 8409910055 | Nozzle body for the regulation of angle and distribution of fuel injection:<br>-of a cylindrical shape,<br>-made of stainless steel,<br>-with 4 or more, but not more than 16 holes,<br>-with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute<br> | 2.00 % |
| 8409910075 | Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:<br>-an inlet diameter of 2 mm or more, but not more than 10 mm,<br>-an outlet diameter of 2 mm or more, but not more than 10 mm,<br>-an electric coil with a resistance of 10 ω or more, but not more than 15 ω, which ends in an electrical connection,<br>-a plastic covering moulded around a stainless steel tube<br> | 2.00 % |
| 8409910080 | Nozzle needle for opening and closing the flow of fuel in the engine, with:<br>-2 holes,<br>-4 grooves,<br>-a diameter of 3 mm or more, but not more than 6 mm,<br>-a length of 25 mm or more, but not more than 35 mm,<br>-made of stainless steel with hard-chrome plating<br> | 2.00 % |
| 8409910083 | Connecting rod for connecting pistons to the crankshaft of a passenger car engine: <br>• made of an alloy containing 96 % steel and the remainder being titanium, vanadium, aluminium, chromium, nickel, copper, phosphorus, silicon, sulphur, manganese,<br>• with two connecting rod bolts,<br>• with a bushing,<br>• of a length of 120 mm or more but not more than 160 mm,<br>• with a surface roughness corresponding to iso 4287-1997,<br>for use in the manufacture of spark ignition motor vehicle engines<br> | 2.00 % |
| 8409910090 | Other | 2.00 % |
| 8409990010 | Injectors with solenoid valve for optimised atomisation in the engine combustion chamber | 2.00 % |
| 8409990035 | The exhaust gas recirculation assembly consisting of:<br>-a control unit,<br>-an air throttle,<br>-an intake pipe,<br>-an outlet hose,<br>for use in the manufacture of compression-ignition combustion engines of motor vehicles | 2.00 % |
| 8409990055 | Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28mm or more, but not more than 181mm | 2.00 % |
| 8409990070 | Metal alloy intake and exhaust valve, with a rockwell hardness hrc 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles | 2.00 % |
| 8409990075 | High pressure fuel rail of galvanized ferrite-pearlite steel with:<br>-at least one pressure sensor and one valve,<br>-a length of 314 mm or more but not more than 322 mm,<br>-an operating pressure not more than 225 mpa,<br>-an inlet temperature not more than 95°c,<br>-ambient temperature of -45°c or more but not more than 145°c,<br>for use in the manufacture of compression ignition engines of motor vehicles | 2.00 % |
| 8409990090 | Other | 2.00 % |