United Kingdom · Heading· 6 subheadings· 70 codes
8481Taps, cocks, valves and similar appliances for pipes, boiler shells, tanks, vats or the like, including pressure-reducing valves and thermostatically controlled valves
Subheadings (6-digit WCO)
United Kingdom tariff lines (10-digit)
All national sub-divisions in United Kingdom's tariff schedule
| HS Code | Description | Primary rate |
|---|---|---|
| 8481100510 | For use in certain types of aircraft | 2.00 % |
| 8481100590 | Other | 2.00 % |
| 8481101910 | For use in certain types of aircraft | 2.00 % |
| 8481101990 | Other | 2.00 % |
| 8481109910 | For use in certain types of aircraft | 2.00 % |
| 8481109940 | Pressure reducing valves in a brass case with:<br>-a length of not more than 30 mm (± 1 mm),<br>-a width of not more than 18 mm (± 1 mm),<br>of a kind used for incorporation in fuel delivery modules of motor vehicles | 2.00 % |
| 8481109990 | Other | 2.00 % |
| 8481201020 | For use in certain types of aircraft | 2.00 % |
| 8481201090 | Other | 2.00 % |
| 8481209020 | For use in certain types of aircraft | 2.00 % |
| 8481209090 | Other | 2.00 % |
| 8481309120 | For use in certain types of aircraft | 2.00 % |
| 8481309130 | Mechanical check (non-return) valve for opening and closing of the flow of fuel:<br>-with an operating pressure of not more than 250 mpa,<br>-with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute,<br>-with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,<br>-made of steel<br> | 2.00 % |
| 8481309191 | Steel check (non-return) valves with:<br>- an opening pressure of not more than 800 kpa<br>- an external diameter not more than 37 mm<br> | 2.00 % |
| 8481309199 | Other | 2.00 % |
| 8481309920 | For use in certain types of aircraft | 2.00 % |
| 8481309950 | Mechanical check (non-return) valve for opening and closing of the flow of fuel:<br>-with an operating pressure of not more than 250 mpa,<br>-with a flow rate of 45 cm³/minute or more, but not more than 55 cm³/minute,<br>-with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,<br>-made of steel<br> | 2.00 % |
| 8481309990 | Other | 2.00 % |
| 8481401050 | For use in certain types of aircraft | 2.00 % |
| 8481401090 | Other | 2.00 % |
| 8481409010 | For use in certain types of aircraft | 2.00 % |
| 8481409090 | Other | 2.00 % |
| 8481801110 | For use in certain types of aircraft | 2.00 % |
| 8481801190 | Other | 2.00 % |
| 8481801910 | For use in certain types of aircraft | 2.00 % |
| 8481801990 | Other | 2.00 % |
| 8481803100 | Thermostatic valves | 2.00 % |
| 8481803900 | Other | 2.00 % |
| 8481804010 | For use in certain types of aircraft | 2.00 % |
| 8481804090 | Other | 2.00 % |
| 8481805100 | Temperature regulators | 2.00 % |
| 8481805920 | Pressure regulating valve for incorporation into compressors of motor vehicle air condition units | 2.00 % |
| 8481805930 | Two-way flow control valve with housing, with: - at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter, - at least 330 cm³/minute, but not more than 5 000 cm³/minute flow rate, - at least 19, but not more than 300 mpa operating pressure | 2.00 % |
| 8481805940 | Flow-control valve<br>- made of steel,<br>- with an outlet hole with a diameter of at least 0,05mm or more, but not more than 0,5 mm,<br>- with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm,<br>- with chromium nitride coating,<br>- with a surface roughness of rp 0,4<br> | 2.00 % |
| 8481805950 | Electromagnetic valve for quantity control with<br>- a plunger,<br>- a solenoid with a of coil resistance of at least 1,85 ohm, but not more than 8,2 ohm | 2.00 % |
| 8481805960 | Electromagnetic valve for quantity control<br>- with a solenoid with a coil resistance of at least 0,19 ohm, but not more than 0,66 ohm, and with an inductance of not more than 1 mh<br> | 2.00 % |
| 8481805970 | Flow-control valve<br>-made of steel,<br>-with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,<br>-with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm<br> | 2.00 % |
| 8481805980 | Solenoid valve for combustion engine oil pump to regulate the quantity of oil in the pump:<br>-with a cable of length of 550 mm or more but not more than 700 mm incorporating an electrical connector,<br>-with an operating pressure of not more than 5.5 bar,<br>-with an operating voltage of 9 vdc or more but not more than 16 vdc,<br>-with a valve's base width of 22 mm or more but not more than 27 mm,<br>-with a valve's length of 55 mm or more but not more than 110 mm,<br>for use in the manufacture of motor vehicle engines | 2.00 % |
| 8481805990 | Other | 2.00 % |
| 8481806100 | Of cast iron | 2.00 % |
| 8481806350 | For use in certain types of aircraft | 2.00 % |
| 8481806390 | Other | 2.00 % |
| 8481806950 | For use in certain types of aircraft | 2.00 % |
| 8481806960 | Four-way reversing valve for refrigerants, consisting of:<br>- a solenoid pilot valve<br>- a brass valve body including valve slider and copper connections<br>with a working pressure up to 4,5 mpa | 2.00 % |
| 8481806999 | Other | 2.00 % |
| 8481807100 | Of cast iron | 2.00 % |
| 8481807310 | For use in certain types of aircraft | 2.00 % |
| 8481807320 | Pressure- and flow-control valve controlled by external electromagnet:<br>- made of steel and/or steel alloy(s),<br>- without integrated circuit,<br>- of not more than 1000 kpa operating pressure,<br>- with a flow quantity of not more than 5 l/min,<br>- without an electromagnet<br> | 2.00 % |
| 8481807390 | Other | 2.00 % |
| 8481807910 | For use in certain types of aircraft | 2.00 % |
| 8481807940 | Service valve which suits for r410a or r32 gas while connecting indoor and outdoor units with:<br>-a withstanding pressure of the valve body of 6,3 mpa,<br>-a leakage ratio of less than 1.6 g/a,<br>-an impurity ratio of less than 1.2 mg/pcs,<br>-an airtight pressure of the valve body of 4.2 mpa<br>for use in the manufacture of air conditioners | 2.00 % |
| 8481807990 | Other | 2.00 % |
| 8481808130 | For use in certain types of aircraft | 2.00 % |
| 8481808190 | Other | 2.00 % |
| 8481808530 | For use in certain types of aircraft | 2.00 % |
| 8481808590 | Other | 2.00 % |
| 8481808730 | For use in certain types of aircraft | 2.00 % |
| 8481808790 | Other | 2.00 % |
| 8481809940 | For use in certain types of aircraft | 2.00 % |
| 8481809970 | Pressure- and flow-control valve controlled by external electromagnet:<br>- made of steel and/or steel alloy(s),<br>- without integrated circuit,<br>- of not more than 1000 kpa operating pressure,<br>- with a flow quantity of not more than 5 l/min,<br>- without an electromagnet<br> | 2.00 % |
| 8481809980 | Solenoid valve for combustion engine continuous variable valve timing system to control oil flow as a function of engine speed and load:<br>-in metal cover,<br>-with electrical connector,<br>-with a force of not more than 10 n,<br>-with an operating voltage of 9 vdc or more but not more than 16 vdc,<br>-with a length of 80 mm or more but not more than 110 mm,<br>-with a width of 80 mm or more but not more than 110 mm,<br>-with a height of 20 mm or more but not more than 30 mm,<br>for use in the manufacture of engines of motor vehicles | 2.00 % |
| 8481809990 | Other | 2.00 % |
| 8481900010 | For use in certain types of aircraft | 2.00 % |
| 8481900025 | Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features:<br>-high-pressure die-cast aluminium en ac-46000,<br>-shot-blasted and machined,<br>-height of 100 mm or more but not exceeding 135 mm,<br>-width of 115 mm or more but not exceeding 150 mm,<br>-weight of 210 g or more but not more than 500 g<br> | 2.00 % |
| 8481900040 | Valve armature:<br>- for the opening and closing of the flow of fuel,<br>- consisting of a shaft and a blade,<br>- with at least 3 but not more than 8 holes on the blade,<br>- made of metal and/or metal alloy(s)<br> | 2.00 % |
| 8481900050 | Silicone or plastic keyboards, comprising:<br>-parts of common metal, and<br>-whether or not comprising parts of plastic,<br>-epoxy resin reinforced with fiberglass or wood,<br>-whether or not printed or surface-treated,<br>-with or without electrical conductors<br>-with or without a membrane bonded to the keyboard,<br>-with or without mono or multilayer protective film<br> | 2.00 % |
| 8481900060 | Nozzle body for the regulation of angle and distribution of fuel injection:<br>-of a cylindrical shape,<br>-made of stainless steel,<br>-with 4 or more, but not more than 16 holes,<br>-with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute<br> | 2.00 % |
| 8481900070 | Nozzle needle for opening and closing the flow of fuel in the engine, with:<br>-2 holes,<br>-4 grooves,<br>-a diameter of 3 mm or more, but not more than 6 mm,<br>-a length of 25 mm or more, but not more than 35 mm,<br>-made of stainless steel with hard-chrome plating<br> | 2.00 % |
| 8481900080 | Flow-control valve<br>-made of steel,<br>-with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,<br>-with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm<br> | 2.00 % |
| 8481900090 | Other | 2.00 % |