HS Code	Description	Primary rate
8481900010	For use in certain types of aircraft	2.00 %
8481900025	Die-cast aluminium housing for electronic throttle control or exhaust gas recirculation systems, comprising the following features:<br>-high-pressure die-cast aluminium en ac-46000,<br>-shot-blasted and machined,<br>-height of 100 mm or more but not exceeding 135 mm,<br>-width of 115 mm or more but not exceeding 150 mm,<br>-weight of 210 g or more but not more than 500 g<br>	2.00 %
8481900040	Valve armature:<br>- for the opening and closing of the flow of fuel,<br>- consisting of a shaft and a blade,<br>- with at least 3 but not more than 8 holes on the blade,<br>- made of metal and/or metal alloy(s)<br>	2.00 %
8481900050	Silicone or plastic keyboards, comprising:<br>-parts of common metal, and<br>-whether or not comprising parts of plastic,<br>-epoxy resin reinforced with fiberglass or wood,<br>-whether or not printed or surface-treated,<br>-with or without electrical conductors<br>-with or without a membrane bonded to the keyboard,<br>-with or without mono or multilayer protective film<br>	2.00 %
8481900060	Nozzle body for the regulation of angle and distribution of fuel injection:<br>-of a cylindrical shape,<br>-made of stainless steel,<br>-with 4 or more, but not more than 16 holes,<br>-with a flow rate of 100 cm³/minute or more, but not more than 500 cm³/minute<br>	2.00 %
8481900070	Nozzle needle for opening and closing the flow of fuel in the engine, with:<br>-2 holes,<br>-4 grooves,<br>-a diameter of 3 mm or more, but not more than 6 mm,<br>-a length of 25 mm or more, but not more than 35 mm,<br>-made of stainless steel with hard-chrome plating<br>	2.00 %
8481900080	Flow-control valve<br>-made of steel,<br>-with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,<br>-with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm<br>	2.00 %
8481900090	Other	2.00 %