Thailand · Chapter 72· 377 entries

§72Iron and steel

Headings (4-digit WCO)

29 headings

7201Pig iron and spiegeleisen in pigs, blocks or other primary forms7202Ferro-alloys7203FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AND OTHER SPONGY FERROUS PRODUCTS, IN LUMPS, PELLETS OR SIMILAR FORMS; IRON HAVING MINIMUM PURITY BY WEIGHT OF 99.94%, IN LUMPS, PELLETS OR SIMILAR FORMS7204Ferrous waste and scrap; remelting scrap ingots of iron or steel7205Granules and powders, of pig iron, spiegeleisen, iron or steel7206Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)7207Semi-finished products of iron or non-alloy steel7208Flat-rolled products of iron or non-alloy steel, of width of 600 mm or more, hot-rolled, not clad, a plated or coated7209Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold reduced), not clad, plated or coated7210Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated7211Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated7212Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated7213Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel7214Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling7215Other bars and rods of iron or non-alloy steel7216Angles, shapes and sections of iron or non-alloy steel7217Wire of iron or non-alloy steel7218Stainless steel in ingots or other primary forms; semifinished products of stainless steel7219Flat-rolled products of stainless steel, of a width of 600 mm or more7220Flat-rolled products of stainless steel, of a width of less than 600 mm7221Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel7222Other bars and rods of stainless steel; angles, shapes and sections of stainless steel7223Wire of stainless steel7224Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel7225Flat-rolled products of other alloy steel, of a width of 600 mm or more7226Flat-rolled products of other alloy steel, of a width of less than 600 mm7227Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel7229Wire of other alloy steel

All Thailand tariff lines

HS CodeDescriptionPrimary rate
72011000Non-alloy pig iron containing by weight 0.5 % or less of phosphorus5.00
72012000Non-alloy pig iron containing by weight more than 0.5 % of phosphorus5.00
72015000Alloy pig iron; spiegeleisen5.00
72021100Containing by weight more than 2 % of carbon6.00
72021900Other6.00
72022100Containing by weight more than 55 % of silicon6.00
72022900Other6.00
72023000Ferro-silico-manganese6.00
72024100Containing by weight more than 4 % of carbon6.00
72024900Other6.00
72025000Ferro-silico-chromium6.00
72026000Ferro-nickel6.00
72027000Ferro-molybdenum6.00
72028000Ferro-tungsten and ferro-silico-tungsten6.00
72029100Ferro-titanium and ferro-silico-titanium6.00
72029200Ferro-vanadium6.00
72029300Ferro-niobium6.00
72029900Other6.00
72031000Ferrous products obtained by direct reduction of iron ore5.00
72039000Other5.00
72041000Waste and scrap of cast iron1.00
72042100Of stainless steel1.00
72042900Other1.00
72043000Waste and scrap of tinned iron or steel1.00
72044100Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundles1.00
72044900Other1.00
72045000Remelting scrap ingots10.00
72051000Granules6.00
72052100Of alloy steel6.00
72052900Other6.00
72061010Containing by weight more than 0.6 % of carbon10.00
72061090Other10.00
72069000Other10.00
72071100Of rectangular (including square) cross-section, the width measuring less than twice the thickness10.00
72071210Slabs10.00
72071290Other10.00
72071900Other10.00
72072010Slabs10.00
72072021Blocks roughly shaped by forging; sheet bars10.00
72072029Other10.00
72072091Slabs10.00
72072092Blocks roughly shaped by forging; sheet bars10.00
72072099Other10.00
72081000In coils, not further worked than hot-rolled, with patterns in relief15.00
72082500Of a thickness of 4.75 mm or more15.00
72082600Of a thickness of 3 mm or more but less than 4.75 mm15.00
72082711Containing by weight 0.6 % or more of carbon15.00
72082719Other15.00
72082791Containing by weight 0.6 % or more of carbon15.00
72082799Other15.00
72083600Of a thickness exceeding 10 mm15.00
72083700Of a thickness of 4.75 mm or more but not exceeding 10 mm15.00
72083800Of a thickness of 3 mm or more but less than 4.75 mm15.00
72083910Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less15.00
72083920Containing by weight less than 0.6 % of carbon and of a thickness more than 0.17 mm but not exceeding 1.5 mm15.00
72083930Containing by weight 0.6 % or more of carbon and of a thickness not exceeding 1.5 mm15.00
72083940Of a thickness more than 2 mm, maximum tensile strength of 550 Mpa and of a width not exceeding 1,250 mm15.00
72083990Other15.00
72084000Not in coils, not further worked than hot-rolled, with patterns in relief15.00
72085100Of a thickness exceeding 10 mm15.00
72085200Of a thickness of 4.75 mm or more but not exceeding 10 mm15.00
72085300Of a thickness of 3 mm or more but less than 4.75 mm15.00
72085410Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less15.00
72085490Other15.00
72089010Corrugated15.00
72089020Other, containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less15.00
72089090Other15.00
72091500Of a thickness of 3 mm or more17.00
72091610Of a width not exceeding 1,250 mm17.00
72091690Other17.00
72091710Of a width not exceeding 1,250 mm17.00
72091790Other17.00
72091810Tin-mill blackplate17.00
72091891Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less17.00
72091899Other17.00
72092500Of a thickness of 3 mm or more17.00
72092610Of a width not exceeding 1,250 mm17.00
72092690Other17.00
72092710Of a width not exceeding 1,250 mm17.00
72092790Other17.00
72092810Containing by weight less than 0.6 % of carbon and of a thickness of 0.17 mm or less17.00
72092890Other17.00
72099010Corrugated17.00
72099090Other17.00
72101110Containing by weight 0.6 % or more of carbon20.00
72101190Other20.00
72101210Containing by weight 0.6 % or more of carbon20.00
72101290Other20.00
72102010Containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less20.00
72102090Other20.00
72103011Of a thickness not exceeding 1.2 mm20.00
72103012Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm20.00
72103019Other20.00
72103091Of a thickness not exceeding 1.2 mm20.00
72103099Other20.00
72104111Of a thickness not exceeding 1.2 mm20.00
72104112Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm20.00
72104119Other20.00
72104191Of a thickness not exceeding 1.2 mm20.00
72104199Other20.00
72104911Coated with zinc by the iron-zinc alloyed coating method, containing by weight less than 0.04 % of carbon and of a thickness not exceeding 1.2 mm20.00
72104914Plated or coated with zinc-aluminium-magnesium alloys, of a thickness not exceeding 1.2 mm20.00
72104915Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm20.00
72104916Plated or coated with zinc-aluminium-magnesium alloys, of a thickness exceeding 1.5 mm20.00
72104917Other, of a thickness not exceeding 1.2 mm20.00
72104918Other, of a thickness exceeding 1.2 mm but not exceeding 1.5 mm20.00
72104919Other20.00
72104991Of a thickness not exceeding 1.2 mm20.00
72104999Other20.00
72105000Plated or coated with chromium oxides or with chromium and chromium oxides20.00
72106111Of a thickness not exceeding 1.2 mm20.00
72106112Of a thickness exceeding 1.2 mm but not exceeding 1.5 mm20.00
72106119Other20.00
72106191Of a thickness not exceeding 1.2 mm20.00
72106192Other, corrugated20.00
72106199Other20.00
72106911Of a thickness not exceeding 1.2 mm20.00
72106919Other20.00
72106991Of a thickness not exceeding 1.2 mm20.00
72106999Other20.00
72107012Painted after coating with zinc20.00
72107013Painted after coating with aluminium-zinc alloys20.00
72107019Other20.00
72107021Painted20.00
72107029Other20.00
72107091Painted20.00
72107099Other20.00
72109010Containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less20.00
72109090Other20.00
72111312Corrugated15.00
72111313Hoop and strip15.00
72111314Universal plates15.00
72111319Other15.00
72111392Hoop and strip15.00
72111393Universal plates15.00
72111399Other15.00
72111414Corrugated15.00
72111415Coils for re-rolling15.00
72111416Hoop and strip15.00
72111417Universal plates15.00
72111419Other15.00
72111494Hoop and strip15.00
72111495Universal plates15.00
72111499Other15.00
72111913Hoop and strip; universal plates15.00
72111914Corrugated15.00
72111919Other15.00
72111991Hoop and strip; universal plates15.00
72111999Other15.00
72112310Corrugated17.00
72112320Hoop and strip, of a width not exceeding 400 mm17.00
72112330Other, of a thickness of 0.17 mm or less17.00
72112390Other17.00
72112910Corrugated17.00
72112920Hoop and strip, of a width not exceeding 400 mm17.00
72112930Other, of a thickness of 0.17 mm or less17.00
72112990Other17.00
72119011Hoop and strip, of a width not exceeding 25 mm17.00
72119012Hoop and strip, of a width exceeding 400 mm17.00
72119013Corrugated17.00
72119014Other, of a thickness of 0.17 mm or less17.00
72119019Other17.00
72119091Of a thickness of 0.17 mm or less17.00
72119099Other17.00
72121011Hoop and strip, of a width not exceeding 25 mm20.00
72121014Hoop and strip, of a width exceeding 400 mm20.00
72121019Other20.00
72121094Hoop and strip, of a width not exceeding 400 mm20.00
72121099Other20.00
72122010Hoop and strip, of a width not exceeding 400 mm20.00
72122020Other, containing by weight less than 0.6 % of carbon and of a thickness of 1.5 mm or less20.00
72122090Other20.00
72123011Hoop and strip, of a width not exceeding 25 mm20.00
72123012Hoop and strip, of a width exceeding 25 mm and not exceeding 400 mm20.00
72123013Other, of a thickness of 1.5 mm or less20.00
72123014Other, coated with zinc by the iron-zinc alloy coating method, containing by weight less than 0.04 % of carbon20.00
72123019Other20.00
72123090Other20.00
72124011Hoop and strip, of a width not exceeding 400 mm20.00
72124012Other hoop and strip20.00
72124013Other, painted after coating with zinc20.00
72124014Other, painted after coating with aluminium-zinc alloys20.00
72124019Other20.00
72124091Hoop and strip, of a width not exceeding 400 mm20.00
72124099Other20.00
72125014Hoop and strip, of a width exceeding 25 mm; universal plates20.00
72125019Other20.00
72125023Hoop and strip, of a width not exceeding 25 mm20.00
72125024Other hoop and strip; universal plates20.00
72125029Other20.00
72125093Hoop and strip, of a width not exceeding 25 mm20.00
72125094Other hoop and strip; universal plates20.00
72125099Other20.00
72126011Hoop and strip20.00
72126012Other, of a thickness of 1.5 mm or less20.00
72126019Other20.00
72126091Hoop and strip20.00
72126099Other20.00
72131010Of circular cross-section measuring not exceeding 50 mm in diameter15.00
72131090Other15.00
72132000Other, of free-cutting steel15.00
72139110Of a kind used for producing soldering sticks15.00
72139120Of a kind used for concrete reinforcement (rebars)15.00
72139130Other, containing by weight 0.6 % or more of carbon, not more than 0.03 % of phosphorus and not more than 0.035 % of sulphur15.00
72139190Other15.00
72139910Of a kind used for producing soldering sticks15.00
72139920Of a kind used for concrete reinforcement (rebars)15.00
72139990Other15.00
72141011Of circular cross-section15.00
72141019Other15.00
72141021Of circular cross-section15.00
72141029Other15.00
72142031Of a kind used for concrete reinforcement (rebars)15.00
72142039Other15.00
72142041Of a kind used for concrete reinforcement (rebars)15.00
72142049Other15.00
72142051Of a kind used for concrete reinforcement (rebars)15.00
72142059Other15.00
72142061Of a kind used for concrete reinforcement (rebars)15.00
72142069Other15.00
72143010Of circular cross-section15.00
72143090Other15.00
72149111Containing by weight 0.38 % or more of carbon and less than 1.15 % of manganese15.00
72149112Containing by weight 0.17 % or more but not more than 0.46 % of carbon and 1.2 % or more but less than 1.65 % of manganese15.00
72149119Other15.00
72149120Containing by weight 0.6 % or more of carbon15.00
72149911Containing by weight less than 1.15 % of manganese15.00
72149919Other15.00
72149991Containing by weight less than 0.38 % of carbon, not more than 0.05 % of phosphorus and not more than 0.05 % of sulphur15.00
72149992Containing by weight 0.38 % or more of carbon and less than 1.15 % of manganese15.00
72149993Containing by weight 0.17 % or more but less than 0.46 % of carbon and 1.2 % or more but less than 1.65 % of manganese15.00
72149999Other15.00
72151010Of circular cross-section17.00
72151090Other17.00
72155010Containing by weight 0.6 % or more of carbon, other than of circular cross-section17.00
72155091Of a kind used for concrete reinforcement (rebars)17.00
72155099Other17.00
72159010Of a kind used for concrete reinforcement (rebars)17.00
72159091Of circular cross-section17.00
72159099Other17.00
72161000U, I or H sections, not further worked than hot-rolled, hot-drawn or extruded, of a height of less than 80 mm15.00
72162110Containing by weight less than 0.6 % of carbon15.00
72162190Other15.00
72162200T sections15.00
72163110Containing by weight 0.6 % or more of carbon15.00
72163190Other15.00
72163210Of a thickness of 5 mm or less15.00
72163290Other15.00
72163311Thickness of the flange not less than thickness of the web15.00
72163319Other15.00
72163390Other15.00
72164010Containing by weight 0.6 % or more of carbon15.00
72164090Other15.00
72165011Containing by weight 0.6 % or more of carbon15.00
72165019Other15.00
72165091Containing by weight 0.6 % or more of carbon15.00
72165099Other15.00
72166100Obtained from flat-rolled products17.00
72166900Other17.00
72169110Angles, other than slotted angles, containing by weight 0.6 % or more of carbon17.00
72169190Other17.00
72169900Other17.00
72171010Containing by weight less than 0.25 % of carbon25.00
72171022Reed wire; wire of a kind used for making strands for prestressing concrete; free-cutting steel wire25.00
72171029Other25.00
72171032Spokes wire; reed wire; free-cutting steel wire25.00
72171033Wire of a kind used for making strands for prestressing concrete25.00
72171039Other25.00
72172010Containing by weight less than 0.25 % of carbon35.00
72172020Containing by weight 0.25 % or more of carbon but less than 0.45 % of carbon35.00
72172091Steel core wire of a kind used for steel reinforced aluminium conductors (ACSR)35.00
72172099Other35.00
72173011Plated or coated with tin25.00
72173019Other25.00
72173020Containing by weight 0.25 % or more of carbon but less than 0.6 % of carbon25.00
72173033Brass coated steel wire of a kind used in the manufacture of pneumatic rubber tyres25.00
72173034Other copper alloy coated steel wire of a kind used in the manufacture of pneumatic rubber tyres25.00
72173035Other, plated or coated with tin25.00
72173039Other25.00
72179010Containing by weight less than 0.25 % of carbon25.00
72179090Other25.00
72181000Ingots and other primary forms10.00
72189100Of rectangular (other than square) cross-section10.00
72189900Other10.00
72191100Of a thickness exceeding 10 mm15.00
72191200Of a thickness of 4.75 mm or more but not exceeding 10 mm15.00
72191300Of a thickness of 3 mm or more but less than 4.75 mm15.00
72191400Of a thickness of less than 3 mm15.00
72192100Of a thickness exceeding 10 mm15.00
72192200Of a thickness of 4.75 mm or more but not exceeding 10 mm15.00
72192300Of a thickness of 3 mm or more but less than 4.75 mm15.00
72192400Of a thickness of less than 3 mm15.00
72193100Of a thickness of 4.75 mm or more17.00
72193200Of a thickness of 3 mm or more but less than 4.75 mm17.00
72193300Of a thickness exceeding 1 mm but less than 3 mm17.00
72193400Of a thickness of 0.5 mm or more but not exceeding 1 mm17.00
72193500Of a thickness of less than 0.5 mm17.00
72199000Other20.00
72201110Hoop and strip, of a width not exceeding 400 mm15.00
72201190Other15.00
72201210Hoop and strip, of a width not exceeding 400 mm15.00
72201290Other15.00
72202010Hoop and strip, of a width not exceeding 400 mm17.00
72202090Other17.00
72209010Hoop and strip, of a width not exceeding 400 mm20.00
72209090Other20.00
72210000Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel.15.00
72221100Of circular cross-section15.00
72221900Other15.00
72222010Of circular cross-section17.00
72222090Other17.00
72223010Of circular cross-section17.00
72223090Other17.00
72224010Not further worked than hot-rolled, hot-drawn or extruded15.00
72224090Other15.00
72230010Of cross-section exceeding 13 mm25.00
72230090Other25.00
72241000Ingots and other primary forms10.00
72249000Other10.00
72251100Grain-oriented15.00
72251900Other15.00
72253010Of high speed steel15.00
72253090Other15.00
72254010Of high speed steel15.00
72254090Other15.00
72255010Of high speed steel17.00
72255090Other17.00
72259110Of high speed steel20.00
72259190Other20.00
72259210Of high speed steel20.00
72259220Other, plated or coated with zinc-aluminium-magnesium alloys20.00
72259290Other20.00
72259910Of high speed steel20.00
72259990Other20.00
72261110Hoop and strip, of a width not exceeding 400 mm15.00
72261190Other15.00
72261910Hoop and strip, of a width not exceeding 400 mm15.00
72261990Other15.00
72262010Hoop and strip, of a width not exceeding 400 mm15.00
72262090Other15.00
72269110Hoop and strip, of a width not exceeding 400 mm15.00
72269190Other15.00
72269210Hoop and strip, of a width not exceeding 400 mm17.00
72269290Other17.00
72269911Plated or coated with zinc20.00
72269919Other20.00
72269991Plated or coated with zinc20.00
72269999Other20.00
72271000Of high speed steel15.00
72272000Of silico-manganese steel15.00
72279010Containing by weight 0.5 % or more of chromium15.00
72279090Other15.00
72281010Of circular cross-section15.00
72281090Other15.00
72282011Not further worked than hot-rolled, hot-drawn or extruded15.00
72282019Other15.00
72282091Not further worked than hot-rolled, hot-drawn or extruded15.00
72282099Other15.00
72283010Of circular cross-section15.00
72283090Other15.00
72284010Of circular cross-section15.00
72284090Other15.00
72285010Of circular cross-section17.00
72285090Other17.00
72286010Of circular cross-section17.00
72286090Other17.00
72287010Not further worked than hot-rolled, hot-drawn or extruded15.00
72287090Other15.00
72288011Of circular cross-section15.00
72288019Other15.00
72288090Other15.00
72292000Of silico-manganese steel25.00
72299021Containing by weight 0.5 % or more of chromium25.00
72299029Other25.00
72299030Other, of high speed steel25.00
72299091Containing by weight 0.5 % or more of chromium25.00
72299099Other25.00
Thailand HS Chapter 72: Iron and steel · Treayo · 全球关税