United States · Chapter 72· 200 entries

§72Iron and steel

Headings (4-digit WCO)

29 headings

7201Pig iron and spiegeleisen in pigs, blocks or other primary forms→7202Ferro-alloys→7203FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE AND OTHER SPONGY FERROUS PRODUCTS, IN LUMPS, PELLETS OR SIMILAR FORMS; IRON HAVING MINIMUM PURITY BY WEIGHT OF 99.94%, IN LUMPS, PELLETS OR SIMILAR FORMS→7204Ferrous waste and scrap; remelting scrap ingots of iron or steel→7205Granules and powders, of pig iron, spiegeleisen, iron or steel→7206Iron and non-alloy steel in ingots or other primary forms (excluding iron of heading 7203)→7207Semi-finished products of iron or non-alloy steel→7208Flat-rolled products of iron or non-alloy steel, of width of 600 mm or more, hot-rolled, not clad, a plated or coated→7209Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled (cold reduced), not clad, plated or coated→7210Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated→7211Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated→7212Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, clad, plated or coated→7213Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy steel→7214Other bars and rods of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling→7215Other bars and rods of iron or non-alloy steel→7216Angles, shapes and sections of iron or non-alloy steel→7217Wire of iron or non-alloy steel→7218Stainless steel in ingots or other primary forms; semifinished products of stainless steel→7219Flat-rolled products of stainless steel, of a width of 600 mm or more→7220Flat-rolled products of stainless steel, of a width of less than 600 mm→7221Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel→7222Other bars and rods of stainless steel; angles, shapes and sections of stainless steel→7223Wire of stainless steel→7224Other alloy steel in ingots or other primary forms; semi-finished products of other alloy steel→7225Flat-rolled products of other alloy steel, of a width of 600 mm or more→7226Flat-rolled products of other alloy steel, of a width of less than 600 mm→7227Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel→7228Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel→7229Wire of other alloy steel→

United States tariff lines (top 200)

669 total in chapter — drill into a heading above for the rest
HS CodeDescriptionPrimary rate
72011000Nonalloy pig iron containing by weight 0.5 percent or less of phosphorusFree→
72012000Nonalloy pig iron containing by weight more than 0.5 percent of phosphorusFree→
72015030Alloy pig ironFree→
72015060SpiegeleisenFree→
72021110Containing by weight more than 2 percent but not more than 4 percent of carbon1.4%→
72021150Containing by weight more than 4 percent of carbon1.5%→
72021910Containing by weight not more than 1 percent of carbon2.3%→
72021950Containing by weight more than 1 percent but not more than 2 percent of carbon1.4%→
72022110Containing by weight more than 3 percent of calcium1.1%→
72022150Other1.5%→
72022175Containing by weight more than 80 percent but not more than 90 percent of silicon1.9%→
72022190Containing by weight more than 90 percent of silicon5.8%→
7202.29.00OtherFree→
7202.29.00.10Containing by weight over 2 percent of magnesiumFree→
7202.29.00.50OtherFree→
72023000Ferrosilicon manganese3.9%→
72024100Containing by weight more than 4 percent of carbon1.9%→
72024910Containing by weight more than 3 percent of carbon1.9%→
7202.49.50Other3.1%→
7202.49.50.10Containing by weight more than 0.5 percent of carbon3.1%→
7202.49.50.90Other3.1%→
72025000Ferrosilicon chromium10%→
72026000FerronickelFree→
72027000Ferromolybdenum4.5%→
72028000Ferrotungsten and ferrosilicon tungsten5.6%→
72029100Ferrotitanium and ferrosilicon titanium3.7%→
72029200Ferrovanadium4.2%→
72029340Containing by weight less than 0.02 percent of phosphorus or sulfur or less than 0.4 percent of silicon5%→
72029380Other5%→
72029910Ferrozirconium4.2%→
72029920Calcium silicon5%→
7202.99.80Other5%→
7202.99.80.20Ferrophosphorus5%→
7202.99.80.40Other5%→
72031000Ferrous products obtained by direct reduction of iron oreFree→
72039000OtherFree→
72041000Waste and scrap of cast ironFree→
72042100Of stainless steelFree→
72042900OtherFree→
72043000Waste and scrap of tinned iron or steelFree→
7204.41.00Turnings, shavings, chips, milling waste, sawdust, filings, trimmings and stampings, whether or not in bundlesFree→
7204.41.00.20No. 1 bundlesFree→
7204.41.00.40No. 2 bundlesFree→
7204.41.00.60Borings, shovelings and turningsFree→
7204.41.00.80OtherFree→
7204.49.00OtherFree→
7204.49.00.20No. 1 heavy meltingFree→
7204.49.00.40No. 2 heavy meltingFree→
7204.49.00.60Cut plate and structuralFree→
7204.49.00.70ShreddedFree→
7204.49.00.80OtherFree→
72045000Remelting scrap ingotsFree→
72051000GranulesFree→
72052100Of alloy steelFree→
72052900OtherFree→
72061000IngotsFree→
72069000OtherFree→
72071100Of rectangular (including square) cross section, the width measuring less than twice the thicknessFree→
7207.12.00Other, of rectangular (other than square) cross sectionFree→
7207.12.00.10Having a width measuring less than four times the thicknessFree→
7207.12.00.50Having a width measuring at least four times the thicknessFree→
7207.19.00OtherFree→
7207.19.00.30Of circular cross sectionFree→
7207.19.00.90OtherFree→
7207.20.00Containing by weight 0.25 percent or more of carbonFree→
7207.20.00.25Having a width measuring less than four times the thicknessFree→
7207.20.00.45Having a width measuring at least four times the thicknessFree→
7207.20.00.75Of circular cross sectionFree→
7207.20.00.90OtherFree→
72081015PickledFree→
72081030Of a thickness of 4.75 mm or moreFree→
72081060Of a thickness of less than 4.75 mmFree→
72082530Of high-strength steelFree→
72082560OtherFree→
7208.26.00Of a thickness of 3 mm or more but less than 4.75 mmFree→
7208.26.00.30High-strength steelFree→
7208.26.00.60OtherFree→
7208.27.00Of a thickness of less than 3 mmFree→
7208.27.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree→
7208.27.00.45OtherFree→
7208.27.00.60OtherFree→
7208.36.00Of a thickness exceeding 10 mmFree→
7208.36.00.30High-strength steelFree→
7208.36.00.60OtherFree→
7208.37.00Of a thickness of 4.75 mm or more but not exceeding 10 mmFree→
7208.37.00.30High-strength steelFree→
7208.37.00.60OtherFree→
7208.38.00Of a thickness of 3 mm or more but less than 4.75 mmFree→
7208.38.00.15High-strength steelFree→
7208.38.00.30With untrimmed edgesFree→
7208.38.00.90OtherFree→
7208.39.00Of a thickness of less than 3 mmFree→
7208.39.00.20“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree→
7208.39.00.25OtherFree→
7208.39.00.30With untrimmed edgesFree→
7208.39.00.90OtherFree→
7208.40.30Of a thickness of 4.75 mm or moreFree→
7208.40.30.30Of a thickness exceeding 10 mmFree→
7208.40.30.60OtherFree→
7208.40.60Of a thickness of less than 4.75 mmFree→
7208.40.60.30Of a thickness less than 3 mmFree→
7208.40.60.60OtherFree→
7208.51.00Of a thickness exceeding 10 mmFree→
7208.51.00.30Universal mill plateFree→
7208.51.00.45Of high-strength steelFree→
7208.51.00.60OtherFree→
72085200Of a thickness of 4.75 mm or more but not exceeding 10 mmFree→
72085300Of a thickness of 3 mm or more but less than 4.75 mmFree→
72085400Of a thickness of less than 3 mmFree→
72089000OtherFree→
72091500Of a thickness of 3 mm or moreFree→
7209.16.00Of a thickness exceeding 1 mm but less than 3 mmFree→
7209.16.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree→
7209.16.00.45OtherFree→
7209.16.00.60OtherFree→
7209.16.00.70AnnealedFree→
7209.16.00.91OtherFree→
7209.17.00Of a thickness of 0.5 mm or more but not exceeding 1 mmFree→
7209.17.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree→
7209.17.00.45OtherFree→
7209.17.00.60OtherFree→
7209.17.00.70AnnealedFree→
7209.17.00.91OtherFree→
7209.18.15Of high-strength steelFree→
7209.18.15.30AnnealedFree→
7209.18.15.60OtherFree→
7209.18.25Of a thickness of less than 0.361 mm (blackplate)Free→
7209.18.25.20AnnealedFree→
7209.18.25.85OtherFree→
7209.18.60OtherFree→
7209.18.60.20AnnealedFree→
7209.18.60.90OtherFree→
72092500Of a thickness of 3 mm or moreFree→
72092600Of a thickness exceeding 1 mm but less than 3 mmFree→
72092700Of a thickness of 0.5 mm or more but not exceeding 1 mmFree→
72092800Of a thickness of less than 0.5 mmFree→
72099000OtherFree→
72101100Of a thickness of 0.5 mm or moreFree→
72101200Of a thickness of less than 0.5 mmFree→
72102000Plated or coated with lead, including terne-plateFree→
7210.30.00Electrolytically plated or coated with zincFree→
7210.30.00.30Of high-strength steelFree→
7210.30.00.60OtherFree→
72104100CorrugatedFree→
7210.49.00OtherFree→
7210.49.00.40“Advanced” or “ultra” of a kind described in statistical note 4 to this chapterFree→
7210.49.00.45OtherFree→
7210.49.00.91Of a thickness of 0.4 mm or moreFree→
7210.49.00.95OtherFree→
7210.50.00Plated or coated with chromium oxides or with chromium and chromium oxidesFree→
7210.50.00.20Of a width less than 1050 mmFree→
7210.50.00.90OtherFree→
72106100Plated or coated with aluminum-zinc alloysFree→
72106900OtherFree→
72107030Not coated or plated with metal and not cladFree→
7210.70.60OtherFree→
7210.70.60.30Electrolytically coated or platedFree→
7210.70.60.60OtherFree→
7210.70.60.90OtherFree→
72109010CladFree→
72109060Electrolytically coated or plated with base metalFree→
72109090OtherFree→
72111300Universal mill plateFree→
7211.14.00Other, of a thickness of 4.75 mm or moreFree→
7211.14.00.30Of high-strength steelFree→
7211.14.00.45Not in coilsFree→
7211.14.00.90OtherFree→
72111915Of high-strength steelFree→
72111920Of a thickness exceeding 1.25 mmFree→
72111930OtherFree→
72111945Of high-strength steelFree→
72111960PickledFree→
7211.19.75OtherFree→
7211.19.75.30With untrimmed edgesFree→
7211.19.75.60OtherFree→
7211.19.75.90OtherFree→
72112315Of high-strength steelFree→
72112320OtherFree→
72112330Of a thickness exceeding 0.25 mm but not exceeding 1.25 mmFree→
72112345Of a thickness not exceeding 0.25 mmFree→
7211.23.60OtherFree→
7211.23.60.30Of a thickness exceeding 1.25 mmFree→
7211.23.60.60Of a thickness exceeding 0.25 mm but not exceeding 1.25 mmFree→
7211.23.60.90Of a thickness not exceeding 0.25 mm:Free→
7211.29.20Of a thickness exceeding 0.25 mmFree→
7211.29.20.30Of a width less than 51 mm, in coilsFree→
7211.29.20.90OtherFree→
72112945OtherFree→
7211.29.60OtherFree→
7211.29.60.30Of a thickness exceeding 1.25 mmFree→
7211.29.60.80OtherFree→
72119000OtherFree→
72121000Plated or coated with tinFree→
72122000Electrolytically plated or coated with zincFree→
7212.30.10Of a thickness exceeding 0.25 mm or moreFree→
7212.30.10.30Of a width less than 51 mm, in coilsFree→
7212.30.10.90OtherFree→
72123030OtherFree→
72123050OtherFree→
72124010Of a width of less than 300 mmFree→
United States HS Chapter 72: Iron and steel · Treayo