United States · Chapter 76· 153 entries
§76Aluminium and articles
Headings (4-digit WCO)
16 headings
7601Unwrought aluminium→7602Aluminium waste and scrap→7603Aluminium powders and flakes→7604Aluminium bars, rods and profiles→7605Aluminium wire→7606Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm→7607Aluminium foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.2 mm→7608Aluminium tubes and pipes→7609Aluminium tubes and pipes→7610Aluminium structures (excluding prefabricated buil-dings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures→7611Aluminium structures (excluding prefabricated buil-dings of heading 9406) and parts of structures (for example, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, balustrades, pillars and columns); aluminium plates, rods, profiles, tubes and the like, prepared for use in structures→7612Aluminium casks, drums, cans, boxes and similar containers (including rigid or collapsible tubular containers), for any material (other than compressed or liquefied gas), of a capacity not exceeding 300 l, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment→7613Aluminium containers for compressed or liquefied gas→7614Stranded wire, cables, plaited bands and the like, of aluminium, not electrically insulated→7615Table, kitchen or other household articles and parts thereof, of aluminium; pot scourers and scouring or polishing pads, gloves and the like, of aluminium; sanitary ware and parts thereof, of aluminium→7616Other articles of aluminium→
United States tariff lines (top 153)
153 total in chapter| HS Code | Description | Primary rate | |
|---|---|---|---|
| 76011030 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | 2.6% | → |
| 7601.10.60 | Other | Free | → |
| 7601.10.60.40 | Of 99.9 percent aluminum or greater | Free | → |
| 7601.10.60.45 | Of greater than 99.8 percent but less than 99.9 percent | Free | → |
| 7601.10.60.90 | Other | Free | → |
| 76012030 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | 2.6% | → |
| 76012060 | Containing 25 percent or more by weight of silicon | 2.1% | → |
| 7601.20.90 | Other | Free | → |
| 7601.20.90.30 | Aluminum vanadium master alloy | Free | → |
| 7601.20.90.45 | Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils | Free | → |
| 7601.20.90.60 | Other, containing 0.03 percent or more by weight of lead (secondary aluminum) | Free | → |
| 7601.20.90.75 | Remelt scrap ingot | Free | → |
| 7601.20.90.80 | Sheet ingot (slab) of a kind described in statistical note 3 to this chapter | Free | → |
| 7601.20.90.85 | Foundry ingot of a kind described in statistical note 4 to this chapter | Free | → |
| 7601.20.90.95 | Other | Free | → |
| 7602.00.00 | Aluminum waste and scrap | Free | → |
| 7602.00.00.35 | Recyclable used beverage containers | Free | → |
| 7602.00.00.45 | Recyclable aluminum auto and truck wheels | Free | → |
| 7602.00.00.55 | Recyclable aluminum from industrial processes, including turnings, borings, shavings, filings, clippings and chips | Free | → |
| 7602.00.00.65 | Other recyclable aluminum | Free | → |
| 7602.00.00.75 | Other | Free | → |
| 76031000 | Powders of non-lamellar structure | 5% | → |
| 76032000 | Powders of lamellar structure; flakes | 3.9% | → |
| 76041010 | Profiles | 5% | → |
| 76041030 | Having a round cross section | 2.6% | → |
| 76041050 | Other | 3% | → |
| 7604.21.00 | Hollow profiles | 1.5% | → |
| 7604.21.00.10 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | 1.5% | → |
| 7604.21.00.90 | Other | 1.5% | → |
| 7604.29.10 | Other profiles | 5% | → |
| 7604.29.10.10 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | 5% | → |
| 7604.29.10.90 | Other | 5% | → |
| 7604.29.30 | Having a round cross section | 2.6% | → |
| 7604.29.30.30 | High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter | 2.6% | → |
| 7604.29.30.60 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | 2.6% | → |
| 7604.29.30.90 | Other | 2.6% | → |
| 7604.29.50 | Other | 3% | → |
| 7604.29.50.20 | High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter | 3% | → |
| 7604.29.50.50 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | 3% | → |
| 7604.29.50.90 | Other | 3% | → |
| 76051100 | Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% | → |
| 76051900 | Other | 4.2% | → |
| 76052100 | Of which the maximum cross-sectional dimension exceeds 7 mm | 2.6% | → |
| 76052900 | Other | 4.2% | → |
| 7606.11.30 | Not clad | 3% | → |
| 7606.11.30.30 | With a thickness of more than 6.3 mm | 3% | → |
| 7606.11.30.60 | With a thickness of 6.3 mm or less | 3% | → |
| 76061160 | Clad | 2.7% | → |
| 7606.12.30 | Not clad | 3% | → |
| 7606.12.30.15 | High-strength heat-treatable alloys of a kind described in statistical note 6 to this chapter | 3% | → |
| 7606.12.30.25 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | 3% | → |
| 7606.12.30.35 | Other | 3% | → |
| 7606.12.30.45 | Body stock | 3% | → |
| 7606.12.30.55 | Lid stock | 3% | → |
| 7606.12.30.91 | Heat-treatable industrial alloys of a kind described in statistical note 7 to this chapter | 3% | → |
| 7606.12.30.96 | Other | 3% | → |
| 76061260 | Clad | 6.5% | → |
| 7606.91.30 | Not clad | 3% | → |
| 7606.91.30.55 | With a thickness of more than 6.3 mm | 3% | → |
| 7606.91.30.95 | With a thickness of 6.3 mm or less | 3% | → |
| 7606.91.60 | Clad | 2.7% | → |
| 7606.91.60.55 | With a thickness of more than 6.3 mm | 2.7% | → |
| 7606.91.60.95 | With a thickness of 6.3 mm or less | 2.7% | → |
| 7606.92.30 | Not clad | 3% | → |
| 7606.92.30.25 | With a thickness of more than 6.3 mm | 3% | → |
| 7606.92.30.35 | With a thickness of 6.3 mm or less | 3% | → |
| 7606.92.60 | Clad | 6.5% | → |
| 7606.92.60.55 | With a thickness of more than 6.3 mm | 6.5% | → |
| 7606.92.60.95 | With a thickness of 6.3 mm or less | 6.5% | → |
| 76071130 | Of a thickness not exceeding 0.01 mm | 5.8% | → |
| 7607.11.60 | Of a thickness exceeding 0.01 mm | 5.3% | → |
| 7607.11.60.10 | Boxed aluminum foil weighing not more than 11.3 kg | 5.3% | → |
| 7607.11.60.90 | Other | 5.3% | → |
| 7607.11.90 | Other | 3% | → |
| 7607.11.90.30 | Body stock | 3% | → |
| 7607.11.90.60 | Lid stock | 3% | → |
| 7607.11.90.90 | Other | 3% | → |
| 76071910 | Etched capacitor foil | 5.3% | → |
| 76071930 | Cut to shape, of a thickness not exceeding 0.15 mm | 5.7% | → |
| 76071960 | Other | 3% | → |
| 76072010 | Covered or decorated with a character, design, fancy effect or pattern | 3.7% | → |
| 76072050 | Other | Free | → |
| 7608.10.00 | Of aluminum, not alloyed | 5.7% | → |
| 7608.10.00.30 | Seamless | 5.7% | → |
| 7608.10.00.90 | Other | 5.7% | → |
| 7608.20.00 | Of aluminum alloys | 5.7% | → |
| 7608.20.00.30 | Seamless | 5.7% | → |
| 7608.20.00.90 | Other | 5.7% | → |
| 76090000 | Aluminum tube or pipe fittings (for example, couplings, elbows, sleeves) | 5.7% | → |
| 7610.10.00 | Doors, windows and their frames and thresholds for doors | 5.7% | → |
| 7610.10.00.10 | Windows and their frames | 5.7% | → |
| 7610.10.00.20 | Thresholds for doors | 5.7% | → |
| 7610.10.00.30 | Other | 5.7% | → |
| 7610.90.00 | Other | 5.7% | → |
| 7610.90.00.20 | Sheet-metal roofing, siding, flooring, and roof guttering and drainage equipment | 5.7% | → |
| 7610.90.00.40 | Architectural and ornamental work | 5.7% | → |
| 7610.90.00.60 | Mobile homes | 5.7% | → |
| 7610.90.00.80 | Other | 5.7% | → |
| 7611.00.00 | Aluminum reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of a capacity exceeding 300 liters, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment | 2.6% | → |
| 7611.00.00.30 | Tanks | 2.6% | → |
| 7611.00.00.90 | Other | 2.6% | → |
| 76121000 | Collapsible tubular containers | 2.4% | → |
| 7612.90.10 | Of a capacity not exceeding 20 liters | 5.7% | → |
| 7612.90.10.40 | With a circular cross section, of a kind used for aerosols | 5.7% | → |
| 7612.90.10.45 | Other | 5.7% | → |
| 7612.90.10.60 | Cans of a capacity exceeding 355 ml but less than 3.8 liters | 5.7% | → |
| 7612.90.10.90 | Other | 5.7% | → |
| 76129050 | Other | Free | → |
| 76130000 | Aluminum containers for compressed or liquefied gas | 5% | → |
| 76141010 | Not fitted with fittings and not made up into articles | 4.9% | → |
| 76141050 | Fitted with fittings or made up into articles | 4.9% | → |
| 7614.90.20 | Electrical conductors | 4.9% | → |
| 7614.90.20.30 | With a cross-sectional area less than 240 mm² | 4.9% | → |
| 7614.90.20.60 | With a cross-sectional area greater than or equal to 240 mm² | 4.9% | → |
| 76149040 | Other | 4.9% | → |
| 76149050 | Fitted with fittings or made up into articles | 5.7% | → |
| 76151011 | Pot scourers and scouring or polishing pads, gloves and the like | 3.1% | → |
| 7615.10.20 | Cast | 3.1% | → |
| 7615.10.20.15 | Bakeware (cookware not suitable for stove top use) | 3.1% | → |
| 7615.10.20.25 | Other | 3.1% | → |
| 7615.10.30 | Other | 3.1% | → |
| 7615.10.30.15 | Bakeware (cookware not suitable for stove top use) | 3.1% | → |
| 7615.10.30.25 | Other | 3.1% | → |
| 7615.10.50 | Cast | 3.1% | → |
| 7615.10.50.20 | Bakeware (cookware not suitable for stove top use) | 3.1% | → |
| 7615.10.50.40 | Other | 3.1% | → |
| 7615.10.71 | Other | 3.1% | → |
| 7615.10.71.25 | Containers suitable for food preparation, baking, reheating or storage, 0.04 mm or more but not over 0.22 mm in thickness | 3.1% | → |
| 7615.10.71.30 | Bakeware (cookware not suitable for stove top use) | 3.1% | → |
| 7615.10.71.55 | Other | 3.1% | → |
| 7615.10.71.80 | Other | 3.1% | → |
| 76151091 | Other | 3.1% | → |
| 76152000 | Sanitary ware and parts thereof | 3.8% | → |
| 76161010 | Nails, tacks and staples | 5.7% | → |
| 76161030 | Rivets | 4.7% | → |
| 76161050 | Cotters and cotter pins | 5.7% | → |
| 7616.10.70 | Having shanks, threads or holes over 6 mm in diameter | 5.5% | → |
| 7616.10.70.30 | Threaded fasteners | 5.5% | → |
| 7616.10.70.90 | Other | 5.5% | → |
| 7616.10.90 | Other | 6% | → |
| 7616.10.90.30 | Threaded fasteners | 6% | → |
| 7616.10.90.90 | Other | 6% | → |
| 76169100 | Cloth, grill, netting and fencing, of aluminum wire | 2.5% | → |
| 76169910 | Luggage frames | Free | → |
| 7616.99.51 | Other | 2.5% | → |
| 7616.99.51.20 | Laminated goods consisting of 2 or more flat-rolled sheets of aluminum held together with an adhesive or having a core of non-metallic material | 2.5% | → |
| 7616.99.51.30 | Ladders | 2.5% | → |
| 7616.99.51.40 | Venetian blinds and parts thereof | 2.5% | → |
| 7616.99.51.50 | Hangers and supports for pipes and tubes | 2.5% | → |
| 7616.99.51.60 | Castings | 2.5% | → |
| 7616.99.51.70 | Forgings | 2.5% | → |
| 7616.99.51.75 | Articles of wire | 2.5% | → |
| 7616.99.51.90 | Other | 2.5% | → |