United States · Chapter 74· 160 entries
§74Copper and articles
Section XVBase metals and articles of base metal · Chapters 72–83（WCO HS）
Headings (4-digit WCO)
16 headings
7401Copper mattes; cement copper (precipitated copper)→7402Unrefined copper; copper anodes for electrolytic refining→7403Refined copper and copper alloys, unwrought→7404Copper waste and scrap→7405Copper waste and scrap→7406Copper powders and flakes→7407Copper bars, rods and profiles→7408Copper wire→7409Copper plates, sheets and strip, of a thickness exceeding 0.15 mm→7410Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding 0.15 mm→7411Copper tubes and pipes→7412Copper tube or pipe fittings (for example, couplings, elbows, sleeves)→7413Copper tube or pipe fittings (for example, couplings, elbows, sleeves)→7415Nails, tacks, drawing pins, staples (other than those of heading 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotterpins, washers (including spring washers) and similar articles, of copper→7418Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper→7419Other articles of copper→
United States tariff lines (top 160)
160 total in chapter| HS Code | Description | Primary rate | |
|---|---|---|---|
| 74010000 | Copper mattes; cement copper (precipitated copper) | Free | → |
| 74020000 | Unrefined copper; copper anodes for electrolytic refining | Free | → |
| 74031100 | Cathodes and sections of cathodes | 1% | → |
| 74031200 | Wire bars | 1% | → |
| 74031300 | Billets | 1% | → |
| 74031900 | Other | 1% | → |
| 74032100 | Copper-zinc base alloys (brass) | 1% | → |
| 74032200 | Copper-tin base alloys (bronze) | 1% | → |
| 7403.29.01 | Other copper alloys | 1% | → |
| 7403.29.01.10 | Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 1% | → |
| 7403.29.01.80 | Other | 1% | → |
| 7404.00.30 | Spent anodes; waste and scrap with a copper content of less than 94 percent by weight | Free | → |
| 7404.00.30.20 | Of refined copper | Free | → |
| 7404.00.30.45 | Containing more than 0.3 percent of lead | Free | → |
| 7404.00.30.55 | Other | Free | → |
| 7404.00.30.65 | Of copper-tin base alloys (bronze) | Free | → |
| 7404.00.30.90 | Other | Free | → |
| 7404.00.60 | Other | Free | → |
| 7404.00.60.20 | Of refined copper | Free | → |
| 7404.00.60.45 | Containing more than 0.3 percent of lead | Free | → |
| 7404.00.60.55 | Other | Free | → |
| 7404.00.60.65 | Of copper-tin base alloys (bronze) | Free | → |
| 7404.00.60.90 | Other | Free | → |
| 74050010 | Containing by weight 5 percent or more but not more than 15 percent of phosphorus | Free | → |
| 7405.00.60 | Other | Free | → |
| 7405.00.60.30 | Beryllium copper master alloy | Free | → |
| 7405.00.60.50 | Other | Free | → |
| 74061000 | Powders of non-lamellar structure | Free | → |
| 74062000 | Powders of lamellar structure; flakes | Free | → |
| 74071015 | Hollow profiles | 3% | → |
| 74071030 | Other | 3% | → |
| 7407.10.50 | Bars and rods | 1% | → |
| 7407.10.50.10 | Having a rectangular cross section | 1% | → |
| 7407.10.50.50 | Other | 1% | → |
| 74072115 | Hollow profiles | 2.2% | → |
| 74072130 | Other | 2.2% | → |
| 74072150 | Low fuming brazing rods | 2.2% | → |
| 74072170 | Having a rectangular cross section | 1.9% | → |
| 74072190 | Other | 2.2% | → |
| 7407.29.16 | Hollow | 3% | → |
| 7407.29.16.10 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 3% | → |
| 7407.29.16.80 | Other | 3% | → |
| 74072934 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 3% | → |
| 74072938 | Other | 3% | → |
| 74072940 | Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver) | 3% | → |
| 74072950 | Other bars and rods | 1.6% | → |
| 74081130 | With a maximum cross-sectional dimension over 9.5 mm | 1% | → |
| 74081160 | With a maximum cross-sectional dimension over 6 mm but not over 9.5 mm | 3% | → |
| 7408.19.00 | Other | 3% | → |
| 7408.19.00.30 | With a maximum cross-sectional dimension of 3 mm or less | 3% | → |
| 7408.19.00.60 | Other | 3% | → |
| 74082100 | Of copper-zinc base alloys (brass) | 3% | → |
| 74082210 | Coated or plated with metal | 3% | → |
| 74082250 | Not coated or plated with metal | 3% | → |
| 74082910 | Coated or plated with metal | 3% | → |
| 74082950 | Not coated or plated with metal | 3% | → |
| 74091110 | Of a thickness of 5 mm or more | 3% | → |
| 7409.11.50 | Of a thickness of less than 5 mm | 1% | → |
| 7409.11.50.10 | Of a width of 500 mm or more | 1% | → |
| 7409.11.50.50 | Of a width of less than 500 mm | 1% | → |
| 74091910 | Of a thickness of 5 mm or more | 3% | → |
| 74091950 | Of a width of 500 mm or more | 1% | → |
| 74091990 | Of a width of less than 500 mm | 3% | → |
| 7409.21.00 | In coils | 1.9% | → |
| 7409.21.00.10 | Of a thickness of 5 mm or more | 1.9% | → |
| 7409.21.00.50 | Of a width of 500 mm or more | 1.9% | → |
| 7409.21.00.75 | Of a thickness less than 1.6 mm | 1.9% | → |
| 7409.21.00.90 | Other | 1.9% | → |
| 7409.29.00 | Other | 1.9% | → |
| 7409.29.00.10 | Of a thickness of 5 mm or more | 1.9% | → |
| 7409.29.00.50 | Of a width of 500 mm or more | 1.9% | → |
| 7409.29.00.75 | Of a thickness less than 1.6 mm | 1.9% | → |
| 7409.29.00.90 | Other | 1.9% | → |
| 74093110 | Of a thickness of 5 mm or more | 3% | → |
| 74093150 | Of a width of 500 mm or more | 1.7% | → |
| 74093190 | Of a width of less than 500 mm | 3% | → |
| 7409.39.10 | Of a thickness of 5 mm or more | 3% | → |
| 7409.39.10.30 | Of phosphor bronze | 3% | → |
| 7409.39.10.60 | Other | 3% | → |
| 74093950 | Of a width of 500 mm or more | 1.7% | → |
| 7409.39.90 | Of a width of less than 500 mm | 3% | → |
| 7409.39.90.30 | Of phosphor bronze | 3% | → |
| 7409.39.90.60 | Other | 3% | → |
| 74094000 | Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel silver) | 3% | → |
| 7409.90.10 | Of a thickness of 5 mm or more | 3% | → |
| 7409.90.10.30 | Of beryllium copper | 3% | → |
| 7409.90.10.60 | Other | 3% | → |
| 7409.90.50 | Of a width of 500 mm or more | 1.7% | → |
| 7409.90.50.30 | Of beryllium copper | 1.7% | → |
| 7409.90.50.60 | Other | 1.7% | → |
| 7409.90.90 | Of a width of less than 500 mm | 3% | → |
| 7409.90.90.30 | Of beryllium copper | 3% | → |
| 7409.90.90.60 | Other | 3% | → |
| 74101100 | Of refined copper | 1% | → |
| 7410.12.00 | Of copper alloys | 1% | → |
| 7410.12.00.30 | Of copper-zinc base alloys (brass) | 1% | → |
| 7410.12.00.60 | Other | 1% | → |
| 7410.21.30 | Copper clad laminates | 3% | → |
| 7410.21.30.20 | Having copper on one side only | 3% | → |
| 7410.21.30.40 | Having copper on both sides | 3% | → |
| 7410.21.30.60 | Other | 3% | → |
| 74102160 | Other | 1.5% | → |
| 74102200 | Of copper alloys | 1.5% | → |
| 7411.10.10 | Seamless | 1.5% | → |
| 7411.10.10.30 | Having an outside diameter of 6 mm or more but not exceeding 16 mm, in coils on spools | 1.5% | → |
| 7411.10.10.90 | Other | 1.5% | → |
| 74111050 | Other | 3% | → |
| 74112110 | Seamless | 1.4% | → |
| 74112150 | Other | 3% | → |
| 74112200 | Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel-silver) | 3% | → |
| 74112910 | Seamless | 1.4% | → |
| 74112950 | Other | 3% | → |
| 74121000 | Of refined copper | 3% | → |
| 7412.20.00 | Of copper alloys | 3% | → |
| 7412.20.00.15 | For brake hoses for vehicles of subheading 8701.21, 8701.22, 8701.23, 8701.24 or 8701.29 or headings 8702, 8703, 8704, or 8705 | 3% | → |
| 7412.20.00.25 | Nipples | 3% | → |
| 7412.20.00.35 | Other | 3% | → |
| 7412.20.00.45 | Other | 3% | → |
| 7412.20.00.65 | Nipples | 3% | → |
| 7412.20.00.85 | Other | 3% | → |
| 7412.20.00.90 | Other | 3% | → |
| 74130010 | Stranded wire | 3% | → |
| 74130050 | Other | 2% | → |
| 74130090 | Fitted with fittings or made up into articles | 3% | → |
| 74151000 | Nails and tacks, drawing pins, staples and similar articles | 2.5% | → |
| 74152100 | Washers (including spring washers) | 3% | → |
| 74152900 | Other | 3% | → |
| 74153305 | Screws for wood | 3% | → |
| 74153310 | Muntz or yellow metal bolts | 1.4% | → |
| 7415.33.80 | Other screws and bolts; nuts | 3% | → |
| 7415.33.80.10 | Having shanks, threads or holes 6 mm or more in diameter | 3% | → |
| 7415.33.80.50 | Having shanks, threads or holes less than 6 mm in diameter | 3% | → |
| 74153900 | Other | 3% | → |
| 7418.10.00 | Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like | 3% | → |
| 7418.10.00.02 | Of copper-zinc base alloys (brass) | 3% | → |
| 7418.10.00.04 | Other | 3% | → |
| 7418.10.00.19 | Coated or plated with precious metals | 3% | → |
| 7418.10.00.21 | Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof | 3% | → |
| 7418.10.00.23 | Cooking and kitchen ware | 3% | → |
| 7418.10.00.25 | Other | 3% | → |
| 7418.10.00.51 | Cooking or heating apparatus of a kind used for domestic purposes, non- electric and parts thereof | 3% | → |
| 7418.10.00.53 | Cooking and kitchen ware | 3% | → |
| 7418.10.00.55 | Other | 3% | → |
| 74182010 | Of copper-zinc base alloys (brass) | 3% | → |
| 74182050 | Other | 3% | → |
| 7419.20.00 | Cast, molded, stamped or forged, but not further worked | Free | → |
| 7419.20.00.10 | Brass plumbing goods, not elsewhere specified or included | Free | → |
| 7419.20.00.50 | Other | Free | → |
| 74198003 | Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with 94 or more wires to the lineal centimeter | Free | → |
| 7419.80.06 | Other | 3% | → |
| 7419.80.06.60 | Fourdrinier wires, seamed or not seamed, suitable for use in papermaking machines, with fewer than 94 or more wires to the lineal centimeter | 3% | → |
| 7419.80.06.80 | Other | 3% | → |
| 74198009 | Other | 3% | → |
| 74198015 | Containers of a kind normally carried on the person, in the pocket or in the handbag | 3% | → |
| 74198016 | Copper springs | 3% | → |
| 74198017 | Chain and parts thereof | 3% | → |
| 74198030 | Coated or plated with precious metal | 3% | → |
| 7419.80.50 | Other | Free | → |
| 7419.80.50.10 | Brass plumbing goods not elsewhere specified or included | Free | → |
| 7419.80.50.50 | Other | Free | → |